Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Carrollton
Gate parts and welding in Carrollton usually means one of three things: a hinge post that has shifted out of plumb, a sagging gate leaf dragging the driveway, or a weld that finally let go after twenty years of North Texas weather. At Ironworks Gate Co., we repair all three, and we do it with a written 90-Day Done Right Promise behind every job. If your gate scrapes the concrete in spring, binds at the latch, or has a hinge that looks ready to give, call (432) 237-4128 and we will send a background-checked, uniformed technician to your Carrollton home, usually the same day.
Why Carrollton Homeowners Call Ironworks Gate Co. First
We have worked on gates in neighborhoods across Carrollton, from the HOA communities along Josey Lane and Trinity Mills to older homes near Old Town and the dense subdivisions around Indian Creek. What we see most is not bad welding. It is what the ground does to the work. Blackland Prairie clay swells and shrinks with the seasons, and a post set too shallow will move. Homeowners tell us a gate worked fine in November and dragged by March. That is the soil, not the gate, and fixing it properly means understanding how deep a footing has to go here, in this city, on this lot.
Our customers in Carrollton call us because we show up when we say, the price is settled before we touch a single bolt, and every job is backed in writing. Victor Salinas started this company in 1984, and he built it on a simple rule: the 400th job gets the same care as the first. That is why a live person answers the phone at (432) 237-4128 around the clock, and why we stand behind every repair with the 90-Day Done Right Promise.
Our Gate Parts & Welding Services in Carrollton
We do the full scope of gate parts and welding work in Carrollton, from a single hinge replacement to a complete post reset and custom fabrication. Here is how we handle the calls we get most.
Hinge Replacement
A worn or seized hinge on an ornamental iron gate is usually the first thing to fail, especially on gates that have been swinging for twenty years or more. In Carrollton’s HOA neighborhoods, where gate styles are often specified by covenant, we match the existing hinge pattern and finish so the repaired gate looks like it belongs. We remove the old weld, align the leaf, and weld the new hinge in place with the gate under load so it closes true.
Post Replacement
This is the defining repair across Carrollton. Clay soil expands after spring rains and contracts during summer drought, and over years of cycles a hinge post will walk out of plumb. The gate sags, scrapes, and the latch stops lining up. We dig out the old footing, set a new post below the active clay zone, and brace it square before welding. Done right, it stays put for decades. Done shallow, you will call us again in two years.
Rail Repair
Top and bottom rails on ornamental iron gates take the brunt of daily use, and welded joints eventually crack from fatigue. We grind out the old weld, true the rail, and run a full-penetration weld. If the rail is too far gone, we fabricate a replacement section in our shop and weld it in on-site, matched to your gate’s profile.
Custom Welding
Some repairs call for a custom piece, not a catalog part. A bent hinge plate on an irregular post. A section of scrollwork missing from a 1980s estate gate. A bracket for an opener arm on a gate that was never automated. Our welders fabricate what the job needs, and we finish it to match the existing iron. This is the work of our Gate Parts & Welding team, trained on ornamental and structural work alike.
We also replace gate rollers, repair or replace latches and locks, and correct sag on gates that drag. Most jobs in Carrollton are finished in a single visit.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Carrollton
When a motorized gate in Carrollton needs parts, the brand on the box matters. We are trained and equipped on nine major gate-automation brands, including LiftMaster, FAAC, Elite, and Mighty Mule. That means the correct repair the first visit, whether your opener is nine months old or closing in on fifteen years. For Carrollton customers with a failed opener arm or a stripped gear, we carry common parts for these brands on our trucks, and we can order the rest quickly for a fast turnaround.
Common Gate Problems We See in Carrollton Homes
- Seasonal gate drag. Clay soil expands after spring rains and pushes hinge posts out of plumb. The gate that cleared in October scrapes the driveway by April. The fix is a post reset below the active clay zone, not just shaving the gate leaf.
- Sliding gate rack wear in tight setbacks. Many Carrollton homes built in the 1980s and 1990s have short driveways where a swing gate will not fit, so a slide gate is the only option. Those racks and pinions wear unevenly from daily cycling, and the gate starts to jerk or jam. We replace the rack section, align the rollers, and get it running smooth again.
- Split concrete around post footings. In shared driveway right-of-ways and side yards, post footings crack from the seasonal soil movement. The gate still hangs, but the latch no longer lines up, and the post is working its way loose. This is a footing problem, not a hardware problem, and we fix the footing.
- Weld fatigue on 30- to 45-year-old gates. Gates built when Carrollton was first developing, in the early 1980s, are now hitting their first serious repair cycle. Weld joints at the hinge plates and rail intersections crack from decades of cycles. We re-weld them properly, and the gate keeps serving.
Pricing for Gate Parts & Welding in Carrollton, TX
We quote every job at a fixed price before any work starts. You will know the number before we strike an arc, and the number on the invoice will match the number we quoted. No surprises.
In Carrollton, hinge replacement on a standard ornamental iron swing gate typically runs $180 to $340. A post replacement, including digging out the old footing and setting a new one below the active clay zone, usually runs $450 to $800 depending on post size and access. Rail repair runs $150 to $350 per section. Custom welding starts around $150 for small brackets and runs up from there for fabricated sections and scrollwork. Latch and lock replacement runs $90 to $220 installed. Active standing offers include $50 off any repair over $250, a free second opinion on any written estimate, and a permanent 5% senior and veteran discount. We also run an $89 seasonal tune-up for Carrollton gates. Call (432) 237-4128 for an exact quote. Estimates are free.
We Also Serve Cities Near Carrollton
Our crews serve Carrollton and the surrounding area, including Coppell, Lewisville, Grapevine, and Euless. If you are a few minutes outside city limits, call us anyway. We are likely already scheduled in your area, and the free estimate covers the drive.
Serving Carrollton, TX - Our Local Coverage Area
We’re based in the Carrollton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Carrollton
Yes. We match existing hinge patterns, post caps, finials, and finish on any repair in a deed-restricted Carrollton community. When we replace a hinge post, we take the old one as a template and reproduce the profile and mounting details so the finished job reads as original. If your HOA requires an architectural review form, we are happy to provide photos and a scope description before work begins. Call (432) 237-4128 to schedule a measurement.
The soil under your post is moving. Carrollton sits on Blackland Prairie clay, which expands measurably after spring rains. That expansion pushes your hinge post slightly out of plumb every season, and the gate leaf drops enough to scrape the driveway. The permanent fix is setting the post footing below the active clay zone, not adjusting the hinges again. We do this regularly in Carrollton, and the repair holds.
Yes. Sliding gates are common in older Carrollton neighborhoods where setbacks are tight and a swing gate would cross the property line or block the driveway. We replace worn rack sections, align rollers and guides, and weld broken track brackets in place. We do the work with the gate in its track whenever possible so access is not interrupted. Call (432) 237-4128 for an exact quote.
We plan the work around your access needs. On a shared driveway off Josey Lane, for example, our crew replaced a hinge post on an ornamental iron swing gate that had dragged against the pavement after spring rains. We set a new post footing below the clay’s active zone, welded a reinforced hinge plate, and restored clearance so both households could use the gate the same day. If a repair cannot be finished in one day, we brace the gate safely open and coordinate with both households before leaving. Call (432) 237-4128 and we will walk through the plan.
Yes. The Valwood industrial district straddling I-35E is one of the largest industrial parks in the Dallas area, and its commercial slide gates cycle hundreds of times a day from semi-truck traffic. We replace worn motor assemblies, rollers, limit switches, and welded rack sections on those gates. This is a high-volume, high-wear niche that residential-focused gate companies are rarely equipped to handle, and we are. Call (432) 237-4128 with the gate location and we will send a technician out.
Call Ironworks Gate Co. for Gate Parts & Welding in Carrollton
If your gate is dragging, sagging, or hanging on a hinge that has seen better days, call us. We will give you a fixed price before any work starts, and we will put the 90-Day Done Right Promise in writing. A live person answers at (432) 237-4128, 24 hours a day, seven days a week. No voicemail trees, no callback queues. Just call, and we will be there when we say.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Carrollton and the surrounding Dallas-Fort Worth area.