FAAC Gate Repair Nationwide

FAAC Gate Repair in Grapevine: What to Know First

FAAC gate repair in Grapevine typically runs $240 to $680, depending on whether you’re dealing with a failed control board, a stripped actuator arm, or a hinge assembly that’s given up after twenty Texas summers. Most repairs are completed in a single visit, with the price quoted and agreed upon before work starts. If you have a FAAC gate that’s grinding, refusing to open, or opening halfway and stopping, call (432) 237-4128 and a live person will answer.

Call (432) 237-4128

This page is written for homeowners in Grapevine who own a FAAC automatic gate and need straight answers about what’s wrong, what it costs, and who can fix it properly. We’re Ironworks Gate Co., and we’ve been repairing FAAC equipment across Grapevine, Colleyville, and Southlake for over 42 years. Victor Salinas, our owner, has worked on FAAC gates since the early days of the brand’s presence in DFW driveways, and as an independent FAAC service provider, we call it like we see it.

How FAAC Products Fail - and How We Fix Them

FAAC builds solid hardware. The C720, C721, and S418 operator lines that show up on older Grapevine estate gates are genuinely tough machines. But every brand has its weak points, and FAAC’s are well known to a shop that’s been inside hundreds of them. Here’s what we actually see in Grapevine:

• C720/C721 series: failing slave capacitor on the control board. The classic symptom is a gate that opens fine but reverses or stalls halfway. Homeowners often blame the motor. It’s almost always the capacitor on the board, and it’s a $40 part, not a $600 motor. We test the board first, before touching anything mechanical.
• S418 and S450 hydraulic operators: weeping seal at the manual release shaft. Grapevine’s heat cycles bake the seal material until it hardens and cracks, and then you get a slow oil weep down the post. The gate still works for months, so people ignore it. When the oil level drops low enough, the pump cavitates and the gate moves in jerks. We replace the seal, flush the reservoir, and refill with the correct hydraulic fluid, not whatever’s on the shelf at the auto parts store.
• FAAC E024U control board: burned relay from overloaded photo-eye wiring. This is the board in most newer FAAC swing gate kits. When the photo-eye wires get nicked by a weed eater or chewed by a squirrel (and Grapevine has ambitious squirrels), the relay burns trying to push current into a short. The board might smell faintly of hot plastic. We replace the relay, repair the wiring, and re-secure it in conduit so the same squirrel doesn’t get a second meal.
• Articulated arm units (FAAC 390, 412): stripped hinge pin at the gate leaf connection. These arms transfer force through a steel pin that wears against the aluminum housing. After ten or fifteen years, the pin develops play, the gate starts shimmying at the end of travel, and eventually the arm pops loose. We machine-fit or replace the pin and bushing, and check the leaf alignment at the same time, because a dragging gate shortens the life of every moving part behind it.
• Facility-grade FAAC 844 and 884 operators: capacitor bank failure after lightning events. Grapevine gets spring storms off the lake, and these big operators soak up surges even when the board survives. The symptom is a gate that hums but won’t move under load. We replace the capacitor bank, install a proper surge suppressor on the feed, and the operator behaves like new. The surge suppressor is the part nobody installs at the factory.

Our FAAC Gate Repair Process

1. 1
   You call (432) 237-4128. A live person picks up, not a machine. We ask what the gate is doing, what model FAAC you have if you know it, and whether you can hear the motor running or nothing at all.
2. 2
   We show up at the scheduled time, in a marked truck, with a background-checked, uniformed technician. Victor or one of his senior techs handles every FAAC job.
3. 3
   We diagnose first. Multimeter on the board, amp draw on the motor, physical check of every hinge, pin, and weld. We’ll tell you exactly what’s wrong before we pick up a tool, and the price comes then, not later.
4. 4
   We make the parts call. For warranty-sensitive jobs on newer units, we use genuine FAAC OEM parts. For out-of-warranty units, we’ll offer a quality aftermarket option where it saves you real money without sacrificing longevity. We tell you the difference and let you choose.
5. 5
   We fix it and test it through at least a dozen full open-close cycles with load applied. That’s how we catch the intermittent faults that a one-cycle test misses.
6. 6
   We walk away leaving the work area clean, the gate closing like it should, and a written 90-Day Done Right Promise covering the job. If something isn’t right, we’re back. No argument, no paperwork.

What FAAC Gate Repair Costs in Grapevine

Expect to pay real money for gate work, but not mystery money. Here’s what we quote for the most common FAAC repairs in Grapevine:

• Capacitor, relay, or small board component replacement: $180-$320 including part and labor.
• Seal replacement and hydraulic flush on S418/S450 operators: $240-$400 depending on oil condition and post access.
• Articulated arm hinge pin and bushing repair: $220-$380, more if the gate leaf has been dragging and needs realignment.
• Full control board replacement: $420-$780 with OEM board; aftermarket options usually run 20-30% less but carry shorter supplier warranties.
• Capacitor bank replacement on 844/884 units: $350-$650 including surge suppressor install.

What moves the price is the age of the unit, the condition of the gate itself, and whether previous “fixes” have left the wiring a rat’s nest. You’ll always get the number before work starts. Call (432) 237-4128 for a free estimate.

Why Grapevine Homeowners Call Ironworks Gate Co. for FAAC Work

Most gate companies in the Metroplex can change a hinge and call it a day. FAAC is a different animal. The control logic, the hydraulic circuits, the safety loop wiring, it’s a system, not a part. Our techs have been inside enough FAAC units to know exactly where to look, which saves you from paying for a “parts cannon” repair that replaces three things when one $40 capacitor was the culprit.

The 90-Day Done Right Promise is written on every invoice. It’s not a handshake. If the gate misbehaves within ninety days of our repair, we return and make it right, at no charge. That’s the Keystone Standard, and it’s been this company’s backbone since 1984.

And if it turns out your FAAC unit is genuinely beyond saving, we service eight other brands: LiftMaster, Mighty Mule, Ghost Controls, DoorKing, BFT, Linear, Viking, and Elite. We’ll tell you the truth about repair versus replacement, because we make money either way and we’d rather earn your trust honestly.

FAQs