Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGhost Controls Keypad & Intercom Repair: The Grapevine Owner’s Guide
Ghost Controls keypad and intercom repair in Grapevine typically runs $145 to $310 installed, depending on whether we’re replacing the keypad module, the intercom board, or the full entry station. We stock Ghost Controls-compatible keypads, intercoms, and wiring harnesses on our trucks, so most Grapevine calls are completed the same day. Most owners discover the failure the hard way: they punch in the code, hear a weak beep or nothing at all, and the gate won’t budge.
Key Takeaways
- Installed repair cost in Grapevine: $145 to $310, quoted and agreed before work starts
- Same-day service available on most Ghost Controls keypad and intercom failures
- We stock Ghost Controls parts plus quality aftermarket equivalents on the truck
- Weather exposure is the leading cause of Ghost Controls keypad failure in North Texas
- Every repair is covered by our written 90-Day Done Right Promise
If you call us at (432) 237-4128, a live person answers. Not a voicemail, not a callback queue. That matters when your gate is stuck closed at 7 a.m. and you need to get to work.
Which Ghost Controls Models This Applies To
Ghost Controls builds several keypad and intercom configurations, and the part numbers matter. The AXK1 and AXK2 wireless keypads work with the Ghost Controls gate opener line, but there’s a compatibility gotcha we see often in Grapevine: older Ghost Controls units from before 2016 use a single-button RF frequency that newer keypads won’t sync with. If you have a Ghost Controls opener that’s more than eight or nine years old, you may need the older keypad module, not the current AXK2 on the shelf at the big box store.
For intercom systems, Ghost Controls pairs with third-party intercom boards in many installs. The wiring between the keypad/intercom and the opener control board is low-voltage, but the signal wire runs through conduit that North Texas sun and heat degrade faster than you’d expect. We inspect that wire run on every Grapevine repair because a perfectly good keypad can read dead if the wire insulation has cooked through at a connection point.
OEM vs aftermarket: Ghost Controls OEM keypads carry the brand warranty and match the mounting footprint exactly. Quality aftermarket equivalents from Linear and DoorKing-compatible manufacturers can save $30 to $60 and perform identically when wired correctly. We’ll give you an honest recommendation for your specific opener model, and the price is settled before we turn a single screw. Ironworks Gate Co. is an independent service provider, not affiliated with Ghost Controls.
Signs Your Ghost Controls Keypad Is Failing
- Keypad lights up but gate doesn’t respond. This usually points to a dead RF module inside the keypad or a corroded signal wire at the opener board. We test both before replacing anything.
- Intermittent operation, worse after rain. Water intrusion through the keypad seal is the culprit. Grapevine gets thunderstorms that saturate outdoor electronics fast, and once moisture gets in, the contacts start degrading.
- Some buttons work, others don’t. Individual button contacts wear out on high-use keypads. This is a direct sign the keypad membrane has reached the end of its service life.
- Intercom buzzes or hums constantly. A failing capacitor on the intercom board or a shorted speaker lead. Left untouched, it can damage the opener’s control board.
- Gate opens on its own or code won’t clear. A stuck button or failed relay on the keypad board sends random open signals. This is a safety issue on a driveway gate, and we flag it immediately when we see it.
Replacement Cost & What’s Included
Ghost Controls keypad replacement in Grapevine runs $145 to $220 installed for a single keypad module. A full entry station with intercom runs $230 to $310. The range comes down to how much wiring we need to re-pull, whether the opener control board needs work, and whether you’re going OEM or aftermarket on the part itself.
Here’s what the price includes, every time:
- The keypad or intercom part, matched to your Ghost Controls model
- Labor for removal, wiring, mounting, and programming
- Testing the full open/close cycle with your remotes and keypad together
- A written 90-Day Done Right Promise: if it’s not right, we come back and make it right
The price you’re quoted is the price you pay. We agree on it before any work begins, and there are no line items added at the end. Victor Salinas established that standard a long time ago, and it’s not changing.
DIY or Call Us?
Here’s an honest split. You can safely check a few things before calling: confirm the keypad has fresh batteries (Ghost Controls keypads use standard AA or 9V depending on model), verify the gate opener itself has power at the outlet, and look for obvious physical damage to the keypad face. Those checks take five minutes and cost nothing.
What goes wrong with DIY on this part: Ghost Controls keypads are low-voltage, but the opener control board they connect to is not. A crossed wire at the board can fry the receiver module, and that’s a $200-plus mistake on top of the original problem. Programming sequences are also easy to get wrong if you don’t have the manual. If you’ve checked the basics and the gate still won’t respond, call (432) 237-4128. We’ll diagnose it properly and tell you what’s actually wrong before we touch anything.
FAQs
Seven to ten years is realistic in the Grapevine climate, but sun exposure on a west-facing gate post can shorten that to five or six. The keypad membrane is the first thing to go, followed by the RF module. We see it regularly on gates along Dove Road and throughout the Grapevine area.
Sometimes. If a single button contact is bad or the RF sync is off, we can repair it. If the membrane is cracked or the board has corrosion, replacement is the honest fix. We’ll tell you which one applies before any money is spent. Call (432) 237-4128 and we’ll walk through what you’re seeing.
Most single keypad swaps run 45 minutes to an hour from arrival to testing. A full entry station with intercom might take 90 minutes if we’re re-pulling wire. We treat your home the way we’d treat our own mother’s, which means the work area looks as good when we leave as it did when we arrived.
We stock Ghost Controls keypads, intercom modules, and wiring harnesses on our trucks. We also keep parts for LiftMaster, Mighty Mule, and DoorKing systems, so if your gate has mixed components, we can often handle the entire job in one visit without a second trip.
Call Ironworks Gate Co. for Ghost Controls Keypad & Intercom Repair in Grapevine
A gate that works right should be the last thing on your mind. When your Ghost Controls keypad or intercom is down, call (432) 237-4128. A live person answers, we’ll give you a straight answer on what’s wrong, and we’ll quote the price before any work starts. We’ve served Grapevine and nearby communities for over 42 years, and every repair carries our written 90-Day Done Right Promise. Senior and veteran discounts apply, and estimates are always free.
Written by Victor Salinas, Owner & Gate Repair Specialist, Ironworks Gate Co. at Ironworks Gate Co., serving Grapevine and nearby areas.