Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.





Linear Gate Installation in Grapevine: What to Know First
Linear gate installation in Grapevine typically runs $1,850 to $4,600 for a single residential gate with operator, depending on leaf width, operator model, and whether we’re working with existing posts or setting new ones. We’re an independent Linear service provider, not a factory shop, which means we’ll tell you plainly when the Linear model you have is worth keeping and when replacement kit makes more sense. Most single-gate Linear installations in Grapevine are completed in one day, with the price settled before any bolt is turned.
This page is for Grapevine homeowners who own a Linear opener or are weighing one against another brand, and who want the job done once, correctly, and guaranteed in writing. If that sounds like you, call (432) 237-4128 and you’ll get a live person, any hour, any day.
Key Takeaways
- Linear gate systems are solid, but the APeX and LRA series have known board and limit-switch failure points we address on nearly every install.
- We quote the job before work begins. The price you agree to is the price you pay.
- Every Linear gate installation carries our 90-Day Done Right Promise in writing.
- We service the other major brands too, so you’re not stuck if your gate has mixed components.
How Linear Products Fail - and How We Fix Them
After two decades turning wrenches across Tarrant County, we’ve seen the same Linear issues repeat themselves in Grapevine driveways. Here are the five we fix most often:
- APeX-series control boards failing after power spikes. The Linear APeX line (older APeX and the newer APeX II) has a control board that does not forgive North Texas lightning season. We see dead boards every spring and early summer in Grapevine after a thunderstorm rolls through. The symptom is a gate that simply will not respond, with no error, no hum, nothing. The fix is a new OEM or Mighty Mule-compatible board, plus a surge protector wired into the service line so the next storm doesn’t cost you another board.
- LRA-series limit switches losing their place. Linear LRA and LRA-DC residential swing operators are dependable motors, but their mechanical limit switches drift, especially in the freeze-thaw cycle we get from December through February in Grapevine. When the limits drift, the gate over-travels, strains the hinge, and eventually pops a gear. We reset the limits properly during install and hard-anchor them so they hold through the seasons.
- Aftermarket gear sets that strip in under two years. Some companies install the cheapest aftermarket gear available. In a Linear slide operator like the SLR series, that is a false economy. We use OEM Linear gears or one specific aftermarket brand with a hardened finish that holds up. A stripped gear sounds like a grinding shriek when the gate mid-travels. We diagnose it by pulling the cover and inspecting gear teeth under light.
- Photo-eye sensors misaligned from day one. This one is not Linear’s fault and it’s not the homeowner’s fault. It is what happens when an installer rushes the sensor mounts on a double gate. One eye is off by half a degree and the gate reverses or refuses to close after three weeks. We mount, align, and lock the eyes on every Linear installation, then test them five times before we call the job done.
- Incompatible keypads and remotes patched in from random brands. Linear remote and keypad frequencies are specific. When a neighbor or a previous tech programs a generic universal remote, it works for a month and then loses sync. We match the exact Linear MegaCode frequency your receiver expects, and we test every remote and keypad in front of you before we leave.
Our Linear Gate Installation Process
- 1
You call, a person answers. We’ll ask about your gate, what is on it, and what it is doing. We’ll schedule a time that works, and we’ll be there when we say.
- 2
We show up and inspect. We check the gate weight, the hinge condition, the post depth, the electrical run, and the existing Linear opener. We will not quote you a number over the phone based on a guess. We come to Grapevine and look at the actual gate.
- 3
We give you a written price. Before any work starts, you will know the total. We’ll explain what needs replacing and what does not. If a part can be saved, we say so.
- 4
We do the work. Removal of the old unit when needed, mounting of the Linear operator, wiring, limit setting, photo-eye alignment, and remote programming. Our techs are uniformed and background-checked, and they treat your driveway like it belongs to their own mother.
- 5
We test it with you. Open, close, stop, reverse, photoelectric interruption, remote pairing, keypad code. If anything is not right, it is fixed before we leave.
- 6
You get the 90-Day Done Right Promise. Written, no paperwork, no arguing. If it is not right, we come back and make it right.
What Linear Gate Installation Costs in Grapevine
| Scope of Work | Typical Grapevine Price Range |
|---|---|
| Single swing gate with Linear LRA operator, existing posts | $1,850 - $2,800 |
| Single sliding gate with Linear SLR operator, existing track | $2,200 - $3,400 |
| Double swing gate with two Linear LRA-DC operators | $3,400 - $4,600 |
| New posts, hinge reinforcement, or track replacement (add-on) | $350 - $900 |
| Photo-eye sensors, keypad, or additional remote (add-on) | $120 - $350 |
What moves the price most is leaf weight and post condition. A twelve-foot ornamental steel gate swinging on four-inch posts is a straightforward day. A sixteen-foot solid cedar gate on badly plumbed posts is another animal. The quote you get is the quote you pay. We settle the number before work starts, and every estimate is free. Call (432) 237-4128 to schedule yours.
Why Grapevine Homeowners Call Ironworks Gate Co. for Linear Work
We have been turning wrenches in this town since 1984. Victor Salinas grew up not far from Dove Road, learned metalwork and electrical systems at Tarrant County College, and has spent over twenty years fixing gates across the DFW side of the lake. What that means for your Linear gate is simple: we have seen your exact problem before, and we know what it takes to fix it so you don’t think about it again.
Beyond Linear, our techs are certified on LiftMaster, Mighty Mule, Ghost Controls, and DoorKing, so when a Grapevine gate has mixed components or the homeowner asks about switching brands, we can answer from experience instead of theory. Every job carries the 90-Day Done Right Promise. A live person answers the phone 24 hours a day, every day. And we still operate on a square deal: upfront price, no surprises on the bill.
FAQs
No. Installing a Linear operator through an independent service provider like Ironworks Gate Co. does not void the manufacturer warranty, as long as the installation follows the manufacturer’s specifications. We install to those specs, and we document the work with photos and notes so if a warranty claim is ever needed, you have a clear record.
Yes. The gate itself and the operator are separate systems. We can install a Linear opener on nearly any properly hung gate in Grapevine, regardless of who welded it. What matters is gate weight, hinge alignment, and post depth. We check all three before quoting.
Most single-gate Linear installations in Grapevine are completed in one day. A double gate or a job that requires new posts or track work may take a second day. You will know the schedule before we begin.
We do both. In fact, many Grapevine homeowners call us for a repair first, see how we work, and then have us handle the replacement when the time comes. If your Linear opener can be fixed economically, we will tell you that instead of selling you a new one.
Every part of the installation we performed. If the gate is not working right within 90 days due to our workmanship or materials, we come back and make it right, free of charge. No paperwork, no arguing. It is how we have done things since 1984.
A gate that works right should be the last thing on your mind. If you’re in Grapevine and need Linear gate installation, call (432) 237-4128 for a free estimate, and you’ll get a live person, not a machine.
Written by Victor Salinas, Owner & Gate Repair Specialist, Ironworks Gate Co. at Ironworks Gate Co., serving Grapevine and nearby areas.
Before
After
Before
After
Before
After