Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Bedford
A new driveway gate in Bedford, TX typically runs $2,800 to $8,500 installed, depending on the gate’s width, material, and whether you are adding an opener. Most standard installations take one to two days once materials are on site. If your existing gate is sagging or the posts have gone out of plumb, call us at (432) 237-4128 and we will tell you honestly whether you need a repair or a full replacement.
We have been working in Bedford long enough to know what the soil does to a gate post. The Blackland Prairie clay under most of this city swells after every rain and shrinks in every drought. A new gate is only as good as the footing beneath it. That is why we treat every Bedford installation as a foundation job first and a gate job second. Our Gate Installation crew runs local, not from somewhere three counties over. When you call, a live person answers. When we schedule, we show up.
Why Ironworks Gate Co. Is Bedford’s Preferred Gate Installation Company
Ironworks Gate Co. has been setting gates for over 42 years, since 1984. In Bedford, we work mostly in the established neighborhoods off Harwood Road, Forest Ridge Drive, and the streets around Central Park, where the original gates from the late 70s through early 90s are failing all at once. Bedford homeowners do not call because they want a fancy upgrade. They call because the hinge side has dropped three inches and the gate will not latch anymore.
Our Bedford customers keep our number after the first job. They tell us the thing they value most is the written 90-Day Done Right Promise. No paperwork, no arguing. If something is not right, we come back and make it right. That is the Keystone Standard on every gate we install, from a small pedestrian gate to a 16-foot double driveway gate with full automation.
Victor Salinas leads our installation crews. He sets the standard for how the work is done: post excavated to the right depth, concrete poured with proper drainage, gate hung plumb, operator wired clean. Background-checked, uniformed technicians on every job. The 400th job gets the same care as the first.
Our Gate Installation Services in Bedford
Driveway Gate
A driveway gate in Bedford does more than mark the property line. On long driveways like those off Harwood Road or along Shady Brook Drive, it is the first and last thing you touch every day. We size operators to the actual weight and span of the gate, not to a generic chart. If the gate is 14 feet wide and built from steel, it gets an operator that can move it for years without straining.
Double Gate
Double swing gates are common in Bedford because most driveways here are wide enough to need two leaves. The failure point is almost always the hinge post on the interior leaf. When one post goes out of plumb, the two leaves stop meeting in the middle. We rebuild both post footings and rehang both leaves so they close true, then set the operator to work with the actual geometry of your driveway.
Swing Gate
Swing gates work with Bedford’s flat residential lots better than sliding gates in most cases. But a swing gate on clay soil needs a deeper, wider footing than most builders poured in 1985. We dig to the proper depth for Bedford’s soil conditions, not the minimum the hardware store gate kit suggests. That difference is why our swing gates are still plumb five years later while the neighbor’s kit gate is dragging on the grass.
Pedestrian Gate
Pedestrian gates get overlooked until the latch fails. In Bedford, many original pedestrian gates were built from the same cedar board-on-board as the fence, and the posts rot at ground level even when the boards still look fine. We replace pedestrian gates with the same attention to post depth and drainage as the driveway gate, because a front walk gate that will not close is just as aggravating as a driveway gate that will not open.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Bedford
We are trained and equipped on nine gate-automation brands, including FAAC, BFT, Linear, and Viking. That matters in Bedford because the opener on your old gate could be any one of them, and the correct repair requires the correct training. We keep common parts stocked locally for these brands, so a Bedford repair visit usually does not turn into a three-week wait for a shipped component. Most jobs are completed in a single visit.
Common Gate Installation Problems We See in Bedford Homes
- Post footings failing from clay movement. Bedford’s expansive soil swells after rain and shrinks in drought. A post set in a shallow footing will tip out of plumb within a year or two, no matter how well the gate itself is built. We excavate deeper and pour footings that hold through the wet-dry cycle.
- Mature tree roots displacing posts. Decades of post oak and elm growth along Bedford fence lines means roots push into the post hole and slowly lever the post sideways. A hinge adjustment will not fix a root problem. The post has to come out, the roots get cut back, and new concrete goes in.
- Undersized solar openers on long driveways. Some Bedford properties have long drives where running grid power to the gate would mean trenching hundreds of feet. A cheap solar kit can fail during cloudy winter weeks and leave the gate stuck partway. We size solar systems with enough battery reserve for North Texas weather, not for a sunny showroom.
- Original cedar posts rotting at ground level. Most gates installed during Bedford’s 1975-1993 building boom used cedar posts set directly in concrete. Cedar holds up above ground but rots where concrete meets soil. The gate boards look fine, but the post is hollow inside. We replace with steel posts or properly sealed wood, set above grade with drainage.
Pricing for Gate Installation in Bedford, TX
Here are honest ranges for Bedford. A standard single swing driveway gate in wood runs $2,800 to $4,500. A steel or ornamental gate runs $4,500 to $8,500. Double driveway gates run $5,000 to $12,000 depending on material and width. Pedestrian gates run $1,200 to $3,000. Automatic openers run $1,500 to $4,500 installed, with solar add-ons typically $800 to $2,000 depending on the panel and battery setup. The price is quoted and agreed before any work starts. No surprises on the bill.
We Also Serve Cities Near Bedford
Our Bedford crews also cover the surrounding Mid-Cities communities: Colleyville, Hurst, Euless, and North Richland Hills. If you live near the Bedford border, you are still in our service area. We dispatch and schedule from our Dallas-Fort Worth office, and the crew that serves Gate Installation in Bedford is the same team that works the nearby cities.
Serving Bedford, TX - Our Local Coverage Area
We’re based in the Bedford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Bedford
Bedford sits on Blackland Prairie clay that swells when wet and shrinks when dry. A shallow post footing shifts with the soil. The fix is a deeper excavation and a properly sized concrete footing, which is standard on every Ironworks Gate Co. installation. If a recent install is already leaning, call (432) 237-4128 and we will inspect the footing before the gate gets damaged further.
Yes. We install solar-powered openers on Bedford properties where trenching power would mean cutting through long drives or landscaping. The key is sizing the panel and battery for North Texas cloud cover, not just for a sunny week in July. We size the system so the gate keeps working through a cloudy stretch in January.
The hinge post on the interior leaf has gone out of plumb, usually from clay movement or root pressure. Sometimes it is rotted cedar. The gate panels themselves may be fine, but if the post is moving, the gate will never close properly. We reset the post and rehang both leaves so they meet clean in the center.
Yes. Any automated gate in Bedford must have entrapment protection, typically safety photocells or a reversing edge, in addition to proper force settings on the operator. This is a UL 325 requirement for gate automation. We install entrapment protection on every automated gate we set, and we test it before we leave.
The boards are still protected by paint or stain, but the post below grade has been sitting in damp clay for 40 years. Cedar rots where concrete meets soil. We see this constantly on original Bedford gates from the 1975-1993 building era. The post is hollow inside, the gate drops, and no hinge adjustment will hold. Replacement is the honest fix.
Call Ironworks Gate Co. at (432) 237-4128 for a free estimate on gate installation in Bedford. A live person answers, 24 hours a day, 7 days a week. We will quote the job before we start, write the 90-Day Done Right Promise into the deal, and show up when we say we will.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Bedford, TX.