Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Grapevine
A new driveway gate in Grapevine runs between $3,800 and $12,500 installed, and most single-family jobs take one to two days on site. We serve homes from Historic Main Street to Silverlake, and we quote the full price before any work begins. If you’re weighing a swing gate, a slide gate, or adding automation to an existing manual gate, call (432) 237-4128 and we’ll walk the site with you, usually within 48 hours.
Grapevine is not a typical suburb. The airport corridor along SH-114 and TX-121 puts commercial-grade gate hardware in the same service radius as Victorian-era pedestrian gates and HOA community entries. Most gate companies in the area built their business on residential driveways. We built ours on both, because Grapevine demands both. That’s the difference between a quote that sounds right and a gate that works right for the next fifteen years.
Key Takeaways
- Free site measure and written estimate, with the full price agreed before work starts
- We install swing gates, slide gates, security gates, and full automation systems
- Crews carry commercial-grade parts for the DFW-adjacent duty cycles Grapevine actually sees
- Every job covered by the written 90-Day Done Right Promise
- A live person answers at (432) 237-4128, 24 hours a day, every day
Why Ironworks Gate Co. Is Grapevine’s Preferred Gate Installation Company
Victor Salinas founded Ironworks Gate Co. in 1984, and the company has spent the decades since doing one thing: gates. Not fences, not general contracting, not “we can probably handle that too.” Driveway gates, pedestrian gates, slide gates, swing gates, security gates, automation, access control, and the welding that holds them together. That narrow focus shows up in the details. Our technicians know why a builder-grade operator fails on a Silverlake HOA entry gate within a year, and they know what to set instead.
We keep a real human on the phone around the clock. When a Grapevine homeowner calls at 7:30 on a Saturday morning because a gate is stuck open and the dog is eyeing the street, a person answers. Not a voicemail tree. Not a callback queue. That matters more than most people realize until they need it once.
Our technicians are background-checked and uniformed, and they work under the K.E.Y.S. code: Krafted right, Every time, Your home first, Standing behind it. The 400th job gets the same care as the first. And every completed job in Grapevine carries our 90-Day Done Right Promise in writing. If it is not right, we come back and make it right. No paperwork, no arguing, no exceptions.
Our Gate Installation Services in Grapevine
Sliding Gate Installation
Sliding gates are the most common choice for Grapevine homes with wide driveways or short setbacks, and for good reason. They do not need room to arc into the yard the way a swing gate does. The catch is that a slide gate is only as good as its track and rollers, and Grapevine’s black clay soil heaves with every wet-dry cycle. We set deeper footings than most specs call for, use heavier V-track rollers, and account for a post that will move. A typical sliding gate installation in Grapevine runs $4,500 to $13,000 depending on length, material, and whether we are adding an operator.
Swing Gate Installation
A swing gate suits a smaller driveway or a property where a slide track would cross walking paths. In Grapevine’s older neighborhoods near Historic Main Street, many homes have ornamental wrought-iron pedestrian gates that would originally have been hung by hand. Today’s swing gates carry automation arms and heavier materials. We install the hinge posts on deep-set concrete piers and brace the hinge side against the constant soil pressure this area is known for. Expect $4,800 to $14,000 for a complete automated swing gate in Grapevine, including the operator.
Security Gate Installation
Security gates in Grapevine run the range from residential driveway gates with keypads to commercial barrier arms serving the hotel and rental-car corridor off SH-114. The commercial work is not an add-on for us. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we stock commercial-grade cycle parts that the bedroom-community gate companies do not carry. A residential security gate with access control starts around $5,500 in Grapevine. A commercial barrier arm with card access is priced per site after a load and cycle assessment.
Driveway Gate Installation
Whether you are in a 1980s tract home or newer construction in Silverlake, the installation path is similar: set the posts, hang the gate leaf, run the power and conduit if it exists (and in most Grapevine builds it does not), mount the operator, wire the safety edges and photocells, and program the openers. We do all of it with our own crews, not subcontracted installers. A standard automated driveway gate in Grapevine runs $3,800 to $9,500 for a single leaf, more for double gates or specialty ironwork.
For a broader look at what we install and how we work, see our Gate Installation page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Grapevine
We install and service automation from nine major manufacturers, and in Grapevine we carry local stock for the ones this market actually runs hard: LiftMaster, DoorKing, and Elite among them. Commercial sites along the SH-114 corridor do not have time to wait four days for a parts order. Neither do homeowners whose gate quit on a Sunday. Our Grapevine stock means faster turnarounds, and our technicians are factory-trained on the full line so the diagnosis on visit one is the correct one.
Common Gate Installation Problems We See in Grapevine Homes
Grapevine has a particular set of gate failure patterns. We see the same issues repeat across neighborhoods, and we have learned to design against them from the start rather than patch after the fact.
- Heaved post footings from black clay. North Texas expansive clay swells when wet and shrinks when dry. Over a few seasons that motion tilts gate posts, binds hinge pins, and drags slide gates off their rollers. We set footings deeper than the minimum and use aggregate backfill that resists the heave.
- Builder-grade operators on high-traffic community gates. Silverlake and other master-planned areas sometimes get a residential swing operator on a gate that cycles 200 times a day. It dies within a year. We replace it with a commercial-duty operator sized to the actual cycle count, not the price point.
- No conduit for automation. Builders often leave automation off the original build and run no conduit. When the homeowner later wants a motorized gate, someone has to trench through established landscaping and the same shifting clay. We run the electrical, the loop detector, and the photocell wiring properly, and we quote the trenching honestly up front.
- Heat-stressed circuit boards and safety sensors. Grapevine summers over 105°F cook operator control boards, especially on west-facing gate columns without venting. We install ventilated enclosures or relocate boards off the hot side during new installations.
Pricing for Gate Installation in Grapevine, TX
| Gate Type | Typical Grapevine Price Range |
|---|---|
| Automated driveway gate, single leaf | $3,800-$9,500 |
| Sliding gate, steel frame with operator | $4,500-$13,000 |
| Swing gate, dual leaf with automation | $5,200-$14,000 |
| Security gate with keypad and access control | $5,500-$16,000 |
| Pedestrian gate, ornamental iron, no automation | $1,800-$4,200 |
| Automation retrofit to existing manual gate | $2,200-$6,500 |
These are installed prices for Grapevine jobs, including posts, hardware, operator if applicable, and basic electrical connection where power exists at the gate. If your gate needs a new power run trenched from the house or transformer, that adds a separate line item we discuss before you sign anything. We quote the full number before the first bolt is turned. You always get a written estimate and the price does not move unless you change the scope. Call (432) 237-4128 for a free site measure and an exact quote.
We Also Serve Cities Near Grapevine
Our Gate Installation in Grapevine crews regularly handle jobs in Grapevine and the surrounding communities. We serve Southlake, Colleyville, Euless, and Coppell with the same direct pricing and the same 90-Day Done Right Promise. If you are one town over and need a gate installed or automated, the crew that works Grapevine today is the crew you get.
Serving Grapevine, TX - Our Local Coverage Area
We’re based in the Grapevine area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Grapevine
Grapevine sits on expansive black clay that swells when the ground is wet and shrinks when it dries, and the seasonal wet-dry cycle physically moves concrete footings upward and sideways over time. For a new gate installation, that means we set posts below the active clay zone and backfill with materials that do not hold moisture, so the column stays where we put it. A post set at a shallow 24 inches will move. A post set properly will not.
Silverlake and similar Grapevine master-planned communities have property management companies that must approve gate changes, sign off on access control programming, and often require specific operator specifications for community entry points. We handle the coordination directly. When a Silverlake HOA needed a slide gate operator retrofitted to an entry gate that was originally installed manual, our crew ran the missing conduit and power from the nearest transformer, trenched past the black clay that had already heaved one post, and set a DoorKing operator with a loop detector and safety photocells, then worked with the property manager on final programming before the gate opened on its first card swipe. That is standard practice for us, not a special favor.
Yes, and we do it often. The challenge in Grapevine is that many manual gates were hung with no conduit for power or control wiring, so the retrofit means trenching through established landscaping and the same expansive clay that has been shifting the footings since the gate went in. We survey the post alignment first, correct any sag or heave, run the electrical to code, and install the operator sized for the gate’s weight and daily cycles. A typical automation retrofit in Grapevine runs $2,200 to $6,500 depending on trenching distance, operator type, and whether safety devices need to be added to meet current standards.
A residential driveway gate might cycle ten times a day. A barrier arm at a hotel or rental-car lot off SH-114 or TX-121 can cycle 500 times a day, every day, which means the operator, the arm counterweight, and the safety loops accumulate a year’s worth of residential wear in about two weeks. Parts suppliers who only stock residential-grade components cannot keep those gates running. We carry commercial-grade replacement parts for the brands those sites depend on, and we understand high-cycle maintenance schedules the way a mechanic understands a fleet vehicle. That is the kind of Grapevine gate work that quietly keeps the airport corridor moving.
Summer temperatures that top 105°F degrade operator circuit boards, rubber seals, and lubricants faster than manufacturer-rated intervals would suggest, especially on west-facing installations with no shade. Winter ice storms then add sudden mechanical stress to arms and hinges that were already heat-aged. On new installations in Grapevine we place control boards in shaded, ventilated enclosures and select lubricants rated for the full North Texas temperature swing. If your gate operator fails after a hard stretch of weather, call (432) 237-4128 for Gate Repair - Grapevine and we will send a technician out with the parts on the truck.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Grapevine and the DFW metro area with gate installation and repair since 1984.