Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Lewisville
Gate installation in Lewisville runs $2,400 to $8,900 for a standard ornamental steel driveway gate with operator, depending on width, automation, and whether the post footings need to be redone. Most projects take two to five days from first measurement to final walkthrough. If you live in Castle Hills, The Colony, or the older streets near Old Town, we know what the soil does to a gate post out here, and we set footings accordingly. Call (432) 237-4128 and a live person will answer, any hour, any day.
Ironworks Gate Co. has worked the DFW gate trade for over 42 years, founded in 1984. The clay under Lewisville is not like the sandy loam you find further west. It moves. A gate installed with a standard 18-inch footing will work fine through a wet spring, then start leaning by the time the August heat has baked the ground dry. We over-excavate on every new install in Lewisville for that reason. It takes longer on the front end and saves you a complete re-hang in year three.
Why Ironworks Gate Co. Is Lewisville’s Preferred Gate Installation Company
Lewisville homeowners call us for one of two jobs. Either the gate that came with their 1990s or early-2000s home has finally failed, or they have been told by their HOA that a replacement must match the approved material list. Both of those jobs are familiar ground for our crews. We pull the HOA’s vendor list before ordering hardware in Castle Hills and the surrounding master-planned communities. We match powder-coat colors, picket spacing, and post caps so the new gate passes architectural review the first time. We have learned that the hard way, watching homeowners get violation notices after an online-order gate arrived in the wrong finish.
Victor Salinas leads our installation crews, and he is the one who set the standard we work to: the 400th job gets the same care as the first. That shows up in the details. We use below-grade bracing on posts in Lewisville no matter what the plan calls for. We check the reveal on every weld. We test the operator’s entrapment protection before we hand you the remote.
Every completed job carries our written 90-Day Done Right Promise. If it is not right, we come back and make it right. No paperwork, no arguing, no exceptions. That promise is part of every contract we write in Lewisville, from a single pedestrian gate in 75057 to a full sliding security gate in 75029.
Our Gate Installation Services in Lewisville
We install and automate every gate type common to Lewisville housing stock, including the ornamental iron and tubular-steel styles that dominate the 1985-2005 subdivisions. Our Gate Installation team handles the full scope: hinges, welds, posts, operators, safety edges, keypads, and access control.
Driveway Gate
The majority of our Lewisville jobs are driveway gates on master-planned lots. In Castle Hills and similar HOA neighborhoods, we coordinate with the community’s approved vendor list before any material gets ordered. A standard single-swing ornamental steel driveway gate, including a new operator and reinforced posts, typically runs $3,200 to $6,400. Double gates run higher, depending on automation and whether the existing piers can be reused. Most piers in Lewisville cannot be reused. The clay has moved them.
Pedestrian Gate
Pedestrian gates in Lewisville see less stress than driveway gates but still suffer from post heave, particularly along the Blackland Prairie corridors. A new steel pedestrian gate with a mechanical keypad and deadbolt runs $1,400 to $2,800 installed. If the gate serves a pool enclosure, we follow the current UL 325 and ASTM F2200 standards for entrapment protection. Lewisville code enforcement checks pool gates, so we do not cut corners there.
Sliding Gate
Sliding gates are common on larger lots in Flower Mound-adjacent parts of Lewisville and on properties with steep driveways where a swing gate would bind. A cantilever sliding gate with a Viking or LiftMaster operator starts around $4,200 and can reach $8,900 for wide spans or heavier steel. The critical factor in Lewisville is the footing. Sliding gates ride on a track or cantilever over a concrete pad, and if that pad cracks from soil movement, the gate will drag. We pour the pad thicker here than in most North Texas cities, and we add rebar where standard plans call for none.
Swing Gate
Swing gates are the bread and butter of Lewisville’s 1990s subdivisions. The biggest avoidable failure we see is a new operator bolted onto a 25-year-old gate with a hinge post that has leaned out of plumb. The operator burns out in months because it is fighting the geometry every single cycle. A new swing gate installation in Lewisville runs $2,400 to $5,800, including a correctly set post and a properly sized operator. We size the operator to the gate, not the other way around.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lewisville
We are trained and certified on nine gate-automation brands, and we install and service LiftMaster, FAAC, Elite, and Mighty Mule systems in Lewisville more than any others. That matters when your 2012 FAAC control board fails and you need a technician who can diagnose it on the first visit instead of guessing. We keep common boards, receivers, and safety-edge parts stocked for fast turnaround. If the part is not on the truck, it is usually two days out, and we tell you that before we start the work.
Common Gate Installation Problems We See in Lewisville Homes
- Heaving posts from Blackland Prairie clay. The dirt under much of Lewisville expands in spring and contracts in the late summer. A gate post poured at a standard 18 to 24 inches will tilt within a few seasons. We over-excavate to four feet and brace below grade on every new installation in the 75067 and 75057 ZIP code areas.
- Obsolete loop-detector operators from the early 2000s. Many Lewisville homes still have the original loop-detect gate systems from 2002 to 2008. Those boards are no longer manufactured. If your gate opens only when a car rides over a buried loop and the box makes a clicking sound but nothing moves, retrofitting is usually not worth it. Replacement is cheaper than chasing obsolete boards.
- HOA material mismatches. In Castle Hills and similar communities, a gate ordered online without pulling the approved material list will likely trigger a violation notice. Wrong powder-coat color, wrong picket style, wrong finial. We pull the list before we order, every time.
- Operators oversized for the gate, or gates too heavy for the operator. Both mistakes shorten the life of the motor and the hinges. We have measured Lewisville gates that spec a 1/2 HP operator but really need 3/4 HP because the builder hung a heavy ornamental steel gate and put the cheapest motor on it. We match the motor to the actual weight and wind load.
Pricing for Gate Installation in Lewisville, TX
Here are the numbers we give Lewisville homeowners over the phone, before we ever set a truck in the driveway. A pedestrian gate runs $1,400 to $2,800. A single swing driveway gate with operator runs $2,400 to $5,800. A double swing gate runs $4,500 to $8,900. A sliding security gate runs $4,200 to $8,900. What changes the number: the width of the opening, the weight of the steel you choose, whether we can reuse your existing operator, and how deep we have to go on the footings. Lewisville is not a city where you can pour a surface pier and walk away. Every price we quote is settled before a single bolt turns. Call (432) 237-4128 and ask for a free measure and written price. No obligation, and the estimate is yours to keep.
We also honor standing offers for Lewisville customers: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a standing 5% senior and veteran discount. Those offers are always active, no coupon required.
We Also Serve Cities Near Lewisville
While this page is written for Gate Installation in Lewisville, our crews regularly run jobs in Coppell, Flower Mound, Carrollton, and Grapevine. Dispatch and scheduling are coordinated from the Dallas-Fort Worth office, and our crews serve Lewisville locally. If you are in a neighboring city and need gate work, call the same number: (432) 237-4128.
Serving Lewisville, TX - Our Local Coverage Area
We’re based in the Lewisville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Lewisville
At least 48 inches, with a reinforced pier and below-grade bracing. The Blackland Prairie clay under Lewisville expands and contracts aggressively through wet and dry seasons. A standard 18 to 24-inch footing will heave out of plumb, and a gate post leaning just a degree or two binds the latch, stresses the hinges, and burns out the operator. Call (432) 237-4128 if you want us to check your existing footings before you order a new gate.
Usually yes, because the hinge post on a 30-year-old Castle Hills gate has almost certainly moved. Hanging a new operator on a post that has shifted even an inch and a half out of plumb means the operator fights the gate on every cycle. The overload trips, the rack and pinion on slide gates strips, and the motor fails within months. We will tell you honestly what can be retrofitted and what is past saving. Call (432) 237-4128 for a straight answer.
You need the community’s approved vendor and material list. Castle Hills and similar Lewisville HOA communities keep a list of approved powder-coat colors, picket styles, post cap designs, and sometimes approved installers. We pull that list before ordering anything, so the gate passes architectural review. Skip that step and you may wind up with a violation notice even after a successful mechanical fix. Call (432) 237-4128 and we will handle the HOA coordination with you.
No. Any automatic gate operator installed or replaced after the UL 325 standard took effect must include entrapment protection: photoeyes, reversing edges, and proper force settings. A 2010 gate without a photocell was non-compliant the day it was installed. We will not install a new operator on a gate without bringing the entrapment protection up to current code. It is a safety issue, and we treat it as one. Call (432) 237-4128 to have us assess what your gate needs to comply.
If the operator clicks but will not activate, or the loop detector board is from a brand that no longer manufactures that model, it is almost certainly obsolete. Many Lewisville homes built between 1995 and 2008 have loop-detect systems whose control boards have been out of production for over a decade. Retrofitting usually costs more than a new operator. We will diagnose it on the first visit and tell you the cheaper answer. Call (432) 237-4128 for a free estimate on the replacement.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Lewisville gate installation and repair with a 90-Day Done Right Promise on every job.