Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across North Richland Hills
Gate motor and opener work in North Richland Hills usually comes down to one of three jobs: replacing a builder-grade operator that gave out years early, adding automation to a gate that was hung manual, or fixing the alignment after shrink-swell clay moved a post. Most of what we see in the 76182 and 76180 ZIP codes traces back to those root causes, and knowing that before we arrive means we bring the right fix the first trip. If your gate is stalling, grinding, or refusing to move, call Ironworks Gate Co. at (432) 237-4128 and we’ll send a technician who works on this equipment every day.
The key takeaways for North Richland Hills homeowners:
- Motor replacement on most residential gates in NRH runs $750-$1,800 installed, depending on gate weight and brand.
- Clay soil movement is the number one cause of repeat opener failures here, not the motor itself.
- We stock parts for FAAC, BFT, Linear, and Viking openers so most repairs in North Richland Hills are finished same visit.
- Every job is backed by our written 90-Day Done Right Promise. No paperwork, no arguing.
Why Ironworks Gate Co. Is North Richland Hills’s Preferred Gate Motor & Opener Company
Ironworks Gate Co. has been hanging and automating gates for over 42 years, founded in 1984. We are not a general handyman service that dabbles in gate motors between fence jobs. We are a dedicated gate company, welded and wired by the same crew, and North Richland Hills homeowners call us because the last contractor either could not find the problem or fixed the symptom and left the cause. The difference is that we look at the post, the footing, the gate weight, and the operator as one system. In North Richland Hills, that matters more than most places, because the soil here works against every component at once.
Our technicians are background-checked and uniformed. They carry parts for nine major opener brands on the truck, so when a Linear arm motor is dead in a Home Town subdivision swing gate, we are not ordering a part and coming back next week. We are fixing it that afternoon. A live person answers our phone 24 hours a day, 7 days a week. Not a voicemail tree, not an answering service. When you call about a gate stuck open in North Richland Hills, a real person picks up and gets a technician dispatched.
Victor Salinas leads the Ironworks Gate Co. team, and he holds every technician to the K.E.Y.S. standard: Krafted right, Every time, Your home first, Standing behind it. The 400th job gets the same care as the first. North Richland Hills customers know us by the truck, and more importantly, they know the gate still closes right a year later.
Our Gate Motor & Opener Services in North Richland Hills
Most homes in North Richland Hills fall into two buckets. The 76180 ZIP code is full of ranch-style tract homes from the mid-1970s through early 1990s, and many of those original wood-framed gates are now being automated for the first time or retrofitted after decades of manual use. The 76182 ZIP code has the newer 2000s and 2010s master-planned subdivisions, where ornamental iron driveway gates were often built with builder-grade operators that were undersized from day one. Our Gate Motor & Opener services cover both ends of that spectrum.
Motor Installation
We install new operators on gates that have never had one and replace existing motors that have failed. In North Richland Hills, proper installation means accounting for the clay. A pad-mount footing that is not set deep enough will shift within a few seasons and throw the rack and pinion out of alignment. We set footings below the active shrink-swell zone and build the mount so the operator stays true even when the surrounding soil moves. Most installations in NRH run $1,200-$2,400 complete, including the operator, mounting, wiring, and safety devices.
Motor Repair
Not every dead gate needs a full replacement. We replace capacitors, control boards, limit switches, and gear assemblies on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule openers. A typical motor repair in North Richland Hills runs $180-$450 for parts and labor, and because we stock common boards and arms locally, most of these jobs are done in one visit. If the motor is beyond saving, we will tell you straight and give you a written replacement price before any work starts.
Linear Motor
Linear arm operators are the workhorse for swing gates in North Richland Hills, especially on the arched iron driveway gates common in the 76182 HOA subdivisions. The problem here is rarely the motor itself. It is the post. When clay heave moves a hinge post a quarter inch, the linear arm binds against the gate leaf and the motor strains until it burns out. We re-plumb the post, reset the arm geometry, and only then replace the motor if it has already failed. A linear motor replacement in NRH typically runs $750-$1,400, and the repair includes checking the post alignment so the new motor is not fighting the same fight the old one lost.
Slide Motor
Slide gates are less common in North Richland Hills than swing gates, but they show up on wider driveways and some of the newer estate lots in the northeast corner of the city. Slide motors work on a chain or rack and pinion system, and the failure point we see most is the photoelectric sensor or the limit switch, not the motor. When the motor does go, we replace it and adjust the track so the gate rolls without dragging. Slide motor replacement in NRH generally runs $900-$1,900, depending on gate weight and whether the chain and sprockets need replacing at the same time.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in North Richland Hills
We are trained and equipped on nine major gate-automation brands, so whatever is on your driveway, we have likely worked on a hundred of them. In North Richland Hills specifically, we see a lot of Linear swing arm units in the HOA subdivisions, FAAC hydraulic operators on heavier ornamental gates, and BFT and Viking on older slide setups. We keep common control boards, photo eyes, and arm assemblies in stock for these brands so a repair in 76180 or 76182 does not mean waiting a week for a shipped part. If you have a builder-grade unit from a brand even we don’t stock, we will give you a straight answer about whether it’s worth repairing or better to replace with something rated correctly.
Common Gate Motor & Opener Problems We See in North Richland Hills Homes
- Builder-grade operators failing at 5-7 years. The 2000s-2010s subdivisions in 76182 were often built with operators sized for a lighter gate than the builder actually hung. The motor works hard on every cycle and burns out early. We replace it with a motor rated for the actual gate weight.
- Post heave knocking swing gate operators out of alignment. The shrink-swell clay under North Richland Hills moves every season. A pad-mount footing that shifts half an inch is enough to bind the arm and stall the motor. We reset the footing and re-plumb the post before installing anything new.
- Manual gates automated without a proper conduit run. In the 1980s-90s homes of 76180, we regularly find automatic openers that were added to a manual wood gate with exposed low-voltage wire run across the ground or zip-tied to the fence. Weed trimmers cut it, freeze-thaw cycles short it, and the gate goes dead. We run proper conduit and direct-burial wire.
- Rack and pinion teeth snapping after a freeze event. North Texas freeze-thaw cycles, like the February 2021 winter storm, amplify soil heave quickly. When the post jumps and the rack teeth are under load, they can shear. We replace the rack and address the post movement so it does not happen again next winter.
Pricing for Gate Motor & Opener in North Richland Hills, TX
Gate motor and opener work in North Richland Hills runs on a fairly consistent range, and we quote every job before we turn a single bolt. Motor repair on an existing operator: $180-$450. New motor installation on a swing gate: $750-$1,800, depending on gate weight, brand, and whether a new pad-mount footing is required. Slide motor replacement: $900-$1,900. Battery backup addition: $350-$800, installed. Full automation of a manual gate, including operator, mounting, wiring, safety devices, and conduit run: $1,800-$3,500. These are real numbers for the NRH market, not a teaser. We also honor standing offers: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount. The price we quote is the price you pay, agreed before work starts, and every job carries the written 90-Day Done Right Promise. Call (432) 237-4128 for a free estimate.
We Also Serve Cities Near North Richland Hills
Ironworks Gate Co. serves all of North Richland Hills, including the 76180 and 76182 ZIP codes, and we regularly work in the surrounding communities of Hurst, Colleyville, Bedford, and Keller. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, with crews serving North Richland Hills locally. If you are in any of those nearby cities, call (432) 237-4128 and we will get you on the schedule.
Serving North Richland Hills, TX - Our Local Coverage Area
We’re based in the North Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in North Richland Hills
Because the problem is usually the post, not the motor. The shrink-swell clay under North Richland Hills moves with every wet-dry cycle, and a pad-mount footing or hinge post that shifts even half an inch will bind the arm and stall the operator. If a new motor was installed without re-plumbing the post or resetting the footing, it will fail the same way. We check the post geometry before we install anything, so the new motor is not fighting the same soil movement that killed the old one. Call (432) 237-4128 and we will diagnose it properly.
Yes. Most slide gate openers in North Richland Hills can accept a battery backup system, and we install them regularly in the HOA-governed subdivisions of 76182 where outages or brownouts leave gates stuck. A battery backup kit runs $350-$800 installed, depending on the opener brand and whether we need to add a dedicated enclosure. The gate keeps working during a power outage, which matters when you need to get a car out. Call (432) 237-4128 for a quote on your specific opener.
Automating a manual wood gate in North Richland Hills means adding an operator, running power and low-voltage wiring through proper conduit, installing safety photo eyes and an entrapment sensor, and often reinforcing or re-hanging the gate leaf so it can handle the automated cycle. On the 1980s ranch homes in 76180, the gate is usually cedar or pressure-treated wood that has weathered 30 to 40 years, so we may recommend reinforcing the frame or replacing hinges first. A full automation job in NRH typically runs $1,800-$3,500. We quote it before any work starts, and the written 90-Day Done Right Promise covers the entire installation.
Yes. Automated gates in Texas are required to have entrapment protection devices, including photo eyes and a reversing mechanism that stops and reverses the gate if it contacts an obstruction. That’s not a suggestion, and it’s not something we skip to save a few dollars. In North Richland Hills specifically, the HOA-governed subdivisions in 76182 often have additional covenant requirements for gate aesthetics, and we work within those standards while meeting the safety requirements. We install and test the safety devices on every automation job.
Heat failure shows up as the motor overheating and tripping its thermal protection during the hottest part of the day, then working normally after it cools down. Post movement shows up as binding or grinding at specific points in the swing arc, even when the motor is cold. In North Richland Hills, we see both, often on the same gate, because summer temperatures over 100°F stress the motor while the clay underneath shifts the post. If your gate is stalling intermittently, call (432) 237-4128 and we will test the motor and check the post alignment in the same visit.
Call Ironworks Gate Co. for Gate Motor & Opener Work in North Richland Hills
If your gate motor is stalling, grinding, or dead, call (432) 237-4128. A live person answers, 24 hours a day, 7 days a week. We serve all of North Richland Hills, from the established ranches of 76180 to the newer subdivisions of 76182, and we give every job the same treatment: upfront pricing agreed before work starts, a written 90-Day Done Right Promise, and a technician who knows how the clay here moves and builds for it. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving North Richland Hills with gate motor & opener repair and installation.