Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Flower Mound
Gate repair in Flower Mound usually comes down to two things: worn parts and shifting posts. Hinge replacement on a typical ornamental iron driveway gate in Flower Mound runs $180-$420, while a full post replacement with excavation and new concrete footing costs $600-$1,400 depending on post size and access. We’re the company homeowners call when a gate has sagged, scraped, or stopped latching, and we carry the parts and welding equipment to fix it without making you wait on a backordered bracket. Call (432) 237-4128 and a live person answers, any hour, any day.
Our Gate Parts & Welding team has spent over 42 years working on driveway and estate gates across North Texas, and the soil under Flower Mound is a different animal than what you find ten minutes east in Lewisville. That clay moves. We plan for it. When we quote a post replacement in Flower Mound, we size the footing for the clay, not for a generic Texas suburb. It matters more than most people think.
Key Takeaways:
- Most Flower Mound gate repairs are completed in a single visit, with the price agreed before we start.
- Post heaving from Blackland Prairie clay is the number one cause of sagging gates in 75022, 75027, and 75028.
- We stock hinges, rollers, latches, and weld-on brackets locally so you’re not waiting on a shipment.
- Every job carries the written 90-Day Done Right Promise. If it isn’t right, we come back and make it right.
Why Ironworks Gate Co. Is Flower Mound’s Preferred Gate Parts & Welding Company
Flower Mound homeowners tend to know their gates. Many of you have lived in the same house since the 1990s or early 2000s, when this town’s master-planned communities went up fast, and with them came a wave of automated ornamental iron driveway gates. You’ve had the cheap fix. You’ve had the handyman who tightened a few bolts and charged you for a repair that failed by the next rain. We hear it on every other call, and we don’t repeat it.
Victor Salinas runs our crew here, and the standard he sets is simple: the 400th job gets the same care as the first. Our technicians are background-checked, uniformed, and trained on nine gate-automation brands including FAAC, BFT, and Linear. That matters when a gate motor acts up and the fix crosses over into hinge alignment, post plumb, and welding. We don’t hand the job off to three different companies. Gate Parts & Welding in Flower Mound is one call, one crew, one written guarantee.
Response time to Flower Mound is usually same-day or next-morning for repair work, and a live person answers the phone 24 hours a day. No voicemail tree, no callback queue. You call, you talk to someone who knows gates.
Our Gate Parts & Welding Services in Flower Mound
Hinge Replacement
Flower Mound’s ornamental iron gates take a beating from the sun and the soil. When a hinge wears, the gate drops a quarter inch, then a half inch, then it drags across the concrete and the operator burns itself out trying to push it. We cut off the old hinge, weld on a new heavy-duty one, and rehang the gate to swing true. A typical hinge replacement in Flower Mound runs $180-$420 per hinge depending on gate weight and whether we need to reinforce the post. We always check the post while we’re there, because replacing a hinge on a leaning post is throwing money at half the problem.
Post Replacement
This is the job Flower Mound needs more than any other. The Blackland Prairie clay under Wellington, The Landing, and most of 75022 swells after spring rains and contracts hard during summer drought. A 36-inch post footing that was poured level twenty years ago can heave three inches out of plumb in a single season. We excavate the old footing, pour an oversized new one, set the post, and weld reinforcing brackets where needed. Post replacement in Flower Mound typically costs $600-$1,400, and the price includes hauling off the old concrete. We quote it before we start, and the number doesn’t change.
Rail Repair
Rails bend, crack, and separate at the welds over time, especially where a heavy gate section meets a post. Wrought iron rail repair in Flower Mound usually lands between $250 and $700, depending on how much linear footage needs rewelding and whether we’re matching an existing powder-coat finish. HOA covenants across Flower Mound often specify approved colors and finishes, so we verify before we weld. A repair that looks right but violates the architectural guidelines means a correction letter and a second visit. We’d rather get it approved the first time.
Custom Welding
Sometimes the part that broke isn’t a part you can order anymore. A 25-year-old gate from a builder who’s long gone, a custom scroll pattern, a latch mount that was fabricated to fit one specific post. That’s where custom welding comes in. We fabricate brackets, reinforce cracked rails, and build adapters on site. Custom welding in Flower Mound runs $150-$500 for most repair work, with a higher range for full custom fabrications. Victor has been welding gate steel for decades, and the work is done to last, not to pass a photo inspection.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Flower Mound
We’re factory-trained on nine gate-automation brands, including FAAC, BFT, and Linear. When a Flower Mound gate operator needs a new control board, a limit switch, or a gear set, we typically have the part on the truck or within a day from our local supplier network. That’s the difference between a gate that’s down for an afternoon and a gate that’s down for two weeks waiting on a part that got shipped from three states away. Whether the operator is a Viking, a FAAC, or a Mighty Mule, the fix gets made correctly the first visit. Most Flower Mound parts and welding jobs are completed in a single trip.
Common Gate Parts & Welding Problems We See in Flower Mound Homes
- Post heaving and tilting from expansive clay. Blackland Prairie clay swells after spring rains and contracts during summer drought, and the movement isn’t subtle. Posts lean, hinges bind, and gates that closed perfectly in March are dragging by August.
- Sagging swing gates that drag across the driveway apron. A sagging gate is almost always a post problem or a hinge problem, not a gate problem. We diagnose it correctly before we cut anything, so you don’t pay for a repair that doesn’t hold.
- Operator circuit boards failing on south- and west-facing driveways. Summer surface temperatures in Flower Mound routinely exceed 100°F. Control boards and wiring insulation degrade faster on unshaded driveways, and we see the failures cluster in July and August.
- HOA compliance surprises. Flower Mound’s subdivisions often have architectural guidelines covering gate styles, powder-coat colors, and hardware finishes. We check the requirements before quoting parts, because installing a non-approved hinge or latch means a violation notice and a second service call.
Pricing for Gate Parts & Welding in Flower Mound, TX
Here’s what you can expect to pay for common gate parts and welding work in Flower Mound:
- Hinge replacement: $180-$420 per hinge, including cutting off the old hinge and welding on the new one.
- Post replacement: $600-$1,400, including excavation, oversized concrete footing, setting, and reinforcing.
- Rail repair: $250-$700, depending on the length of rail and the finish matching needed.
- Custom welding: $150-$500 for typical repair fabrication; full custom work quoted by the job.
- Gate rollers: $120-$350 per roller assembly for slide gates, including alignment.
- Latch and lock replacement: $95-$280, depending on hardware grade and whether welding is required.
Every quote is written and agreed before a single bolt is turned. That’s not a promise we make lightly; it’s the only way we’ve done business for 42 years. We also offer a Free Second Opinion on Any Written Estimate, so if another company has quoted you a post replacement or a hinge job, bring it to us and we’ll tell you honestly whether the work is needed and whether the price is fair. Call (432) 237-4128 for a free estimate on any gate parts or welding work in Flower Mound.
We Also Serve Cities Near Flower Mound
Our crews work throughout the Flower Mound area, and we regularly handle gate parts and welding jobs in Lewisville, Southlake, Grapevine, and Coppell. If you’re a few miles outside Flower Mound’s city limits, call us anyway. We likely have a crew nearby, and the same written 90-Day Done Right Promise applies no matter where the gate is.
Serving Flower Mound, TX - Our Local Coverage Area
We’re based in the Flower Mound area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Flower Mound
The posts keep leaning because the original footings were never sized for Flower Mound’s expansive Blackland Prairie clay. Straightening a post without replacing the footing is a temporary fix that usually fails within one or two seasons. The clay swells after spring rains and contracts during summer drought, and a shallow or undersized footing moves with it. The permanent fix is to excavate the post, pour an oversized concrete footing that extends below the active clay zone, and reset the post plumb. In Flower Mound, that job typically runs $600-$1,400 per post. Call (432) 237-4128 and we’ll tell you whether your footings are the real problem.
Most broken ornamental iron hinges can be welded and reinforced without replacing the gate. We cut off the damaged section, weld on a new heavy-duty hinge, and add a reinforcing bracket if the post shows any sign of movement. The gate usually stays in place on its existing mounts while we work, so you don’t lose use of the driveway. If the hinge failed because the post itself is leaning, we’ll tell you that before we weld anything. A welded hinge on a moving post fails again, and we don’t sell repairs that don’t hold.
Yes, in many Flower Mound subdivisions you do, and it’s a step we handle before quoting. HOA covenants across Flower Mound’s master-planned communities often specify approved hardware finishes, gate styles, and even latch types. Installing a non-approved finish can trigger a violation notice and force a second service call. We verify the relevant architectural guidelines before we order parts or start work, so the repair is compliant the first time. Bring us your HOA’s design standards when you call, and we’ll work from them. Call (432) 237-4128 for a free estimate.
For a Flower Mound driveway with no AC power at the gate, a solar-powered operator with a battery bank is the standard answer, and from our experience the FAAC and BFT solar systems hold up best in this climate. The key is sizing the panel and battery to handle North Texas summer heat, which shortens battery life and stresses electronics. We’ve installed solar swing gates on Flower Mound acreage where a power run would have cost more than the gate itself. A solar operator installation typically starts around $2,800-$5,500, depending on gate weight, span, and whether we’re running access control. Call (432) 237-4128 and we’ll come measure the gate and the sun exposure, then write you a firm price.
Stand at the end of the driveway and sight the post. If the post itself is vertical but the gate sags, it’s a hinge problem. If the post leans in any direction, the sagging is a post problem, even if the hinges are also worn. A quick test: open the gate halfway and look at the gap between the gate and the post at the top and bottom. If the gap is wider at the top, the post is leaning. If the gap is even but the gate still droops, the hinges are worn. In Flower Mound, where clay movement is the dominant issue, sagging gates are more often post problems than hinge problems. We’ll diagnose it for free when we come out. Call (432) 237-4128.
Contact Ironworks Gate Co. for gate parts and welding in Flower Mound. A live person answers the phone 24 hours a day, 7 days a week. We’ll schedule a visit, diagnose the problem, and give you a written price before any work begins. Every job is backed by the written 90-Day Done Right Promise, and we offer $50 off any repair over $250, a Free Second Opinion on any written estimate, and an $89 seasonal tune-up for Flower Mound homeowners. Senior and veteran discounts are 5%, always. Call (432) 237-4128 today.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Flower Mound with gate parts and welding since 1984.