Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Southlake, TX
When a driveway gate stops opening on a Southlake morning, the problem is rarely small. Most gates here are heavy ornamental iron hung on brick or stone pillars, and when they fail, it’s usually a sign that something structural or electrical has been quietly wearing down for months. Our crews work in Southlake throughout the week, and they know the difference between a gate that needs a quick capacitor and one that’s pulling its hinge plates out of a shifting pillar. If your gate won’t open, won’t close, or sounds like it’s grinding through the cycle, call us at (432) 237-4128 and describe what you’re hearing. A live person answers, twenty-four hours a day.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Southlake Homeowners Choose Ironworks Gate Co.
Southlake isn’t like most service areas. The homes are larger, the gates are heavier, and the standard for workmanship gets set by what neighbors can see from the street. Homeowners in Timarron and along Continental Boulevard have told us the same thing for years: the last company fixed the symptom, not the gate. We come out, diagnose the whole assembly, and tell you plainly what’s wrong, what it costs, and what can wait. Our technicians are background-checked and uniformed, and every one of them works on nine gate-automation brands, including FAAC, LiftMaster, and Viking. The result is a first-visit fix on most service calls, with a written 90-Day Done Right Promise on every completed job. No paperwork, no arguing. If it isn’t right, we come back.
We serve the full 76092 ZIP code, from the estate properties in Timarron to the custom homes off Peytonville Avenue and the neighborhoods near Southlake Boulevard. Whether the call is a dead opener, a sagging gate leaf, or a pillar that’s pulling away from the hinge plate, the approach is the same: quote the price before we turn a bolt, then stand behind the work in writing.
Gate Repair Services We Offer in Southlake
Gate Repair
A bent or sagging gate rarely fixes itself, and in Southlake’s climate, ignoring it tends to make the damage travel: hinge plates loosen, the opener strains, and the pillar starts to crack. We repair ornamental iron gates, weld cracked frames, re-anchor hinges, and true the gate so it closes flush again. Most repairs are completed in a single visit. Learn more about our Gate Repair in Southlake.
Gate Installation
A new gate in Southlake is a different conversation than a new gate anywhere else, because the posts are almost always masonry, the driveway is usually long, and the gate itself is a visual anchor for the whole property. We design and install driveway gates that match the existing architecture, with hinge and post work done to handle our soil conditions. Learn more about our Gate Installation in Southlake.
Gate Motor & Opener
Southlake gates run on commercial-grade swing and slide operators more often than not, and that means the opener needs to be matched to the weight, the wind load, and the cycle count. We repair and replace motors, control boards, safety loops, and remote systems, and we’re certified on FAAC, BFT, Linear, Viking, LiftMaster, and four additional brands. Learn more about our Gate Motor & Opener in Southlake.
Gate Access Control
Keypads, intercoms, vehicle sensors, and smartphone entry systems all need to work together, and they all need to survive Texas heat and ice. We install and service access control packages that match how your family actually uses the gate, then test everything end to end before we leave.
Gate Parts & Welding
Sometimes the gate itself is salvageable and the failure is one cracked weld, one seized hinge, or one rusted anchor plate. Our shop stocks the gate hardware Southlake properties actually use, and our welding work is done on site or in our DFW shop, whichever makes more sense for the repair.
Neighborhoods We Serve in Southlake
Our trucks are in Southlake every week, and we reach most homes in the 76092 ZIP code within a couple of hours on repair calls. A few of the neighborhoods we work in regularly:
- Timarron
- Continental Park Estates
- Northbridge
- Estes Park
- Cambridge Place
Why Southlake’s Climate & Housing Affect Gate Repair
Southlake sits on expansive Blackland Prairie clay, and that one fact explains more gate failures here than any other single cause. The soil swells when it rains and shrinks in the summer heat, and over a five- to ten-year cycle, that movement pushes against the masonry pillars that anchor almost every gate in the city. In neighborhoods like Timarron, where brick pillar-mounted ornamental iron swing gates are the standard, the pattern is so consistent that our techs stock lag-shield anchors and hydraulic cement on every truck. We see the same repair on the same type of pillar, again and again: anchor bolts sheared inside the brick, mortar joints opened at the hinge column, and a gate that was installed square now dragging or binding.
Then there are the winters. The February 2021 freeze disabled a wave of low-voltage gate operators across Southlake, cracking unprotected control-board housings and killing motors that had never been weather-sealed for that kind of cold. Homeowners along Southlake Boulevard and Continental Boulevard were calling us for weeks. It isn’t the gate’s fault, and it isn’t always poor installation. It’s the combination of our Clay soil, our freeze-thaw cycles, and gates that are simply heavier than the average opener can fight forever. Repairing a Southlake gate means understanding all three.
Pricing for Gate Repair in Southlake
Every job gets a firm quote before work begins, and that price is what you pay. No add-ons, no last-minute line items. Here’s what Southlake homeowners can generally expect:
- Diagnostic service call: $89, credited toward the repair if you proceed
- Hinge re-anchoring or pillar repair: $350-$900, depending on masonry condition
- Opener motor or control board replacement: $450-$1,400, depending on brand and gate weight
- Full gate realignment and weld repair: $250-$700, most jobs completed same visit
- Seasonal tune-up: $89, includes chain or belt tension, limit adjustments, and safety check
We also offer $50 off any repair over $250, a free second opinion on any written estimate, and a permanent 5% discount for seniors and veterans. Call (432) 237-4128 and we’ll give you a straight answer on cost before you commit.
Service Area - Cities Near Southlake
Ironworks Gate Co. also works in neighboring communities. We serve homeowners in Colleyville, Grapevine, Bedford, and Keller. If you live in one of those cities, the same crews and the same written guarantee apply.
Serving Southlake, TX - Our Local Coverage Area
We’re based in the Southlake area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Southlake
Most gate repairs in Southlake run between $250 and $900, with opener work on heavier estate gates sometimes reaching $1,400. Hinge re-anchoring on masonry pillars tends to fall in the $350-$900 range depending on how much mortar and structural repair is needed. Call (432) 237-4128 for an exact quote. Estimates are free.
In most cases, yes. Because our techs carry lag anchors, hydraulic cement, common opener parts, and welding equipment on the truck, the majority of our Southlake repair calls are completed in one visit. Call us in the morning and we’ll tell you straight whether we can get to you today.
It’s almost always the soil. Southlake’s Blackland Prairie clay expands and contracts with rain and drought, and over five to ten years that movement pushes pillars out of plumb, shears anchor bolts, and opens mortar joints. The fix is re-anchoring with proper lag shields and repairing the mortar, not just patching the crack. Our crews do this repair on Southlake homes weekly.
Yes, we’re certified on nine gate-automation brands, including FAAC, Viking, BFT, Linear, LiftMaster, and four others. Whatever opener is on your driveway, our technicians have likely serviced the same model in the last month.
A full installation includes the gate itself, hinge and post work sized for your soil and gate weight, the opener, safety edges and loops, and a final test of the complete system. We quote every installation item by item before any work begins. Call (432) 237-4128 for a free measure and written price.
Contact Ironworks Gate Co. in Southlake
If your gate isn’t working the way it should, call us at (432) 237-4128. You’ll get a live person, a straight answer, and a free estimate. We’re the gate company Southlake homeowners call when they want the job done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Southlake and the surrounding communities since the company’s founding in 1984.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Southlake Customers Say
"The photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that a sprinkler head was spraying it every morning, which is why it kept happening."
- Jamal Dawson"The gate works properly now and the price was fair. It did take two visits, because the operator we have is old and the part had to be ordered. They did not charge for the second trip."
- Carrie Mercer"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one on the truck, and we were moving cars again inside an hour."
- Chris Gallagher