Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Southlake
Gate motor problems in Southlake are rarely simple. Our crews work on heavy ornamental iron swing gates mounted to brick or stone pillars, long driveway slide gates, and automation systems that have to handle gates weighing far more than a standard residential opener was ever designed for. If your gate is sagging, grinding, refusing to open, or dead after a storm, we can usually have a technician to your Southlake property within a few hours, not days. Call (432) 237-4128 and you’ll get a live person 24 hours a day, 7 days a week. Victor Salinas leads our team, and every job carries our 90-Day Done Right Promise in writing.
Why Ironworks Gate Co. Is Southlake’s Preferred Gate Motor & Opener Company
Southlake homes, particularly in Timarron, Westwyck Hills, and along Dove Road and Peytonville Avenue, demand more from a gate company than most neighborhoods in the metro. The gates here are custom-fabricated iron, often 12 to 16 feet wide, hung on masonry pillars with poured concrete footings. They’re heavy. And the motors that move them have to be correctly sized, correctly wired, and correctly adjusted or they fail early and often. We warranty our work with the 90-Day Done Right Promise, which means if it isn’t right, we come back. No paperwork, no arguing. That’s the Keystone Standard on every job, in the 76092 ZIP code and beyond.
We know this city’s housing stock: large custom homes built from the 1990s through the 2010s, most with long driveways and pedestrian-side entry gates in addition to the main vehicle gate. We know the failure patterns. We know which opener models hold up on a 1,200-pound iron gate and which ones don’t. And we know who to send: background-checked, uniformed technicians who work under the same standards we’d apply in our own mothers’ homes.
Our Gate Motor & Opener Services in Southlake
Motor Installation
Installing a gate motor in Southlake means matching the operator to the weight, width, and duty cycle of the gate it has to move. A light-duty residential swing arm won’t last a year on a 14-foot ornamental iron gate. We install commercial-grade operators from brands like LiftMaster, FAAC, and BFT, sized correctly for the gate you actually have. Most installations are completed in a single visit, with the price agreed before any work begins.
Motor Repair
We repair gate motors throughout Southlake, from the estates of Timarron to the gated communities off Southlake Boulevard. Most repair calls involve grinding gears, stripped rack-and-pinion teeth on slide gates, dead control boards, or misaligned safety photocells. We stock parts for nine major automation brands on the truck, so most repairs are finished the same visit. If your gate is stuck open or closed, call us. A live person answers. We’ll tell you honestly what it will take to fix it.
Linear Motor
Linear arm operators are common on Southlake swing gates, and they fail in ways that are specific to this area. The Blackland Prairie clay under the city swells and contracts with rain and drought, shifting masonry pillars and throwing the linear arm out of alignment. When that happens, the motor works harder than it should, burns out capacitors, or bends the arm itself. We repair, realign, and when necessary replace linear operators with the correct torque rating for your gate.
Slide Motor
Slide gates are standard on long Southlake driveways where a swing gate would block car turnaround space. The issue here, again, is weight. A heavy custom iron slide gate on rack-and-pinion track needs a motor sized for the rolling mass and the friction of the track. We install and service slide motors from Viking, Ghost Controls, and Linear, and we take extra care with track alignment. A slide gate that’s out of alignment will chew through gear teeth and rack sections. We set it right.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Southlake
Our technicians are trained on nine gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Southlake customers, that means whatever is already on your driveway, we likely stock the parts and know the failure modes. We keep common boards, capacitors, limit switches, and remote receivers ready to go, so a repair doesn’t stall waiting on a part from a warehouse. If your opener is older and the part isn’t worth replacing, we’ll tell you straight and quote you a replacement instead.
You’ll also find our Gate Motor & Opener team’s work across the full scope of automation: motor repair, slide operators, intercom integration, and battery backup systems.
Common Gate Motor & Opener Problems We See in Southlake Homes
- Clay-driven pillar movement shears hinge bolts. The expansive clay soil under Southlake swells after rain and contracts in drought, which slowly shifts masonry gate pillars. Within five to ten years, hinge plates pull loose, anchor bolts shear, and the whole swing gate drops out of plumb.
- Ice storms cook low-voltage control boards. The February 2021 freeze wasn’t a one-off in this part of North Texas. When ice builds up on an exposed control board housing, the board shorts. We replace and enclose boards in weatherproof, insulated housings.
- Heavy gates overload residential-grade openers. A motor sized for a 300-pound aluminum gate won’t hold up on a 1,400-pound custom iron one. We see burned-out motors and stripped gears on gates where the operator was never correctly matched to the load.
- Safety photocells misaligned by shifting concrete. When a pillar or track shifts even a quarter-inch, the safety beam falls out of alignment and the gate refuses to close. It’s a simple fix, but homeowners often misread it as a dead motor.
Pricing for Gate Motor & Opener in Southlake, TX
Here are honest ranges for Southlake’s market, based on the kinds of gates we actually service here:
| Service | Typical Southlake Price Range |
|---|---|
| Motor repair (board, capacitor, limit switch) | $180 - $420 |
| Full swing gate operator replacement | $1,100 - $2,800 |
| Slide gate motor replacement | $1,400 - $3,200 |
| Linear arm operator installation | $950 - $1,900 |
| Battery backup installation | $450 - $850 |
| Intercom integration to existing operator | $350 - $900 |
Weight, gate length, pillar condition, and the wiring run all influence the final number. The price you’re quoted is the price you pay. We settle it before a single bolt is turned, and a free estimate is always available. Call (432) 237-4128 and we’ll send a technician. If you have a written quote from another company, bring it: we’ll provide a free second opinion.
We Also Serve Cities Near Southlake
We work throughout the northeast Tarrant County area, and our crews are scheduled regularly in Southlake, Colleyville, Grapevine, Bedford, and Keller. Dispatch is coordinated from our Dallas-Fort Worth office. If you’re outside Southlake proper, call anyway, the odds are good we have a truck nearby.
Serving Southlake, TX - Our Local Coverage Area
We’re based in the Southlake area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Southlake
The hinges usually aren’t the problem. It’s the pillar they’re bolted to. The Blackland Prairie clay beneath Southlake expands and contracts through the seasons, shifting the masonry pillar and pulling the hinge plate away from the column. Adjusting the hinges only treats the symptom. The permanent fix involves re-setting the pillar or re-anchoring the hinge plates with lag shields and hydraulic cement, then re-aligning the operator. We keep those materials on every Southlake-bound truck. Call (432) 237-4128 for an exact assessment.
Yes. The LA500’s control board accepts dry-contact and relay inputs, which is how most intercom and telephone-entry systems trigger the open command. We wire the intercom’s relay output into the operator’s open-command terminals, adjust the auto-close timing, and test the full cycle. If you have an older intercom that doesn’t put out a clean relay signal, we can add an interface relay to make it work. Estimates are free, so call (432) 237-4128.
The answer has three parts: correctly sized operator, perfectly level track, and weight-bearing trucks or wheels that actually carry the gate’s mass. When a slide gate racks, it means the gate is twisting because the load isn’t evenly distributed. We level the track, replace worn guide rollers, and if the motor is undersized, we upgrade it to one that can move the gate without strain. On Southlake’s clay, track sections also shift over time, so we re-bed them in compacted base and verify level with a laser. Call (432) 237-4128 for a free measure and written price.
If the operator is under five years old and the rest of it is in good shape, replacing the board usually makes sense. If it’s older, or if the freeze also cracked the enclosure and let moisture into the gear train, you’re likely better off replacing the whole unit. We’ll open it up, show you what we find, and give you both prices before you decide. A board replacement runs $180 to $320 in Southlake, while a full operator replacement starts around $1,100.
Yes. A battery backup keeps the gate working through power outages, which matters on a long Southlake driveway when the gate is the only vehicle entrance. We size the battery bank to the operator’s draw, install it in a weatherproof housing, and test it under full load. A typical battery backup installation for a slide gate in Southlake runs $450 to $850 depending on the operator. Call (432) 237-4128 and we’ll put a number on it.
Written by Victor Salinas, Owner at Ironworks Gate Co., specializing in gate motors and openers across Southlake, TX.