Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Colleyville
Most gate repairs in Colleyville come down to one of three things: a post that has moved in the clay, a hinge that has worn past its limit, or an operator board that has finally given up after 25 years of Texas heat. We fix all three, and we do it on the first visit most of the time. Our crews work Colleyville streets every week, from the estate lots off Montclair Drive to the gated entries along Glade Road, so we know what these gates are up against. If your gate is sagging, grinding, or refusing to open at all, call (432) 237-4128 and a live person will answer, any hour of the day or night.
Why Ironworks Gate Co. Is Colleyville’s Preferred Gate Repair Company
Colleyville homeowners have a different standard for gate work than most of Tarrant County. These are estate-scale gates on half-acre and acre lots, and they have to look right, close right, and satisfy an HOA that pays attention. We have been doing exactly that for over 42 years, since 1984. The gates we repair on Colleyville drives today are often the same style of ornamental iron we were welding two decades ago, just with 1990s automation bolted on. Victor Salinas started this company with a simple rule: do the work right, write the guarantee down, and answer the phone like a neighbor. That rule has not changed.
We are not the cheapest gate contractor in Colleyville, and we do not try to be. We are the company you call when you want the gate to work again and never want to think about it again. Every repair is covered by our 90-Day Done Right Promise in writing. If something is not right, we come back and make it right. No paperwork, no arguing, no exceptions. Background-checked, uniformed technicians do the work the way they would on their own mother’s driveway. And a live person answers our phone 24 hours a day, 7 days a week. Not a voicemail tree. Not an answering service. A person.
Our Gate Repair Services in Colleyville
Colleyville gates live hard. The black clay under North Texas swells every spring and shrinks every August, and a 14-foot iron gate does not forgive that movement. These are the repairs we handle most often in Colleyville, and how we approach each one.
Electric Gate Repair
When an electric gate in Colleyville stops responding to the remote, the cause is usually a failed control board, a dead capacitor, or a photocell that has drifted out of alignment after a season of ground movement. We test the full circuit before replacing anything, so you are not paying for guesswork. We carry boards, remotes, and safety edges for all nine major automation brands on our trucks, and we quote the price before turning a single bolt.
Automatic Gate Repair
Automatic gate operators in Colleyville run hard. A 16-foot double-swing gate on a half-acre lot cycles dozens of times a day, and the original 1990s operators out there are simply at the end of their service life. We repair what can be repaired and replace what cannot, always with a written price agreed up front. If your operator is chattering, failing to reverse, or blowing fuses, call us before it strands you outside the drive. The price is quoted and agreed before any work starts.
Hinge & Post Repair
Hinge and post failures are the signature gate problem in Colleyville. The expansive clay soil under Tarrant County moves gate posts out of plumb every spring, and that movement transfers directly to the hinge barrels and pin connections. A gate that drags on the ground, sags at the latch side, or pops open on its own almost always has a post that has drifted and a hinge that has been carrying weight it was never designed for. We re-set posts with 3,000 psi concrete and schedule-40 steel sleeves, then hang the gate so it closes square and true.
Gate Realignment
A gate that will not latch in Colleyville is usually not a latch problem. It is a post problem. When the post heaves, the gate leaf drops, and the latch bar no longer lines up with the receiver. We realign the gate by addressing the post first, then the hinges, then the latch. That sequence is the difference between a repair that lasts five years and one that lasts five months. We also check operator limits and travel after realigning, because a gate that closes differently is a gate the operator has to relearn.
We also handle Gate Repair beyond these four, including lock replacement, weld and rust repair, cantilever slide gate service, and access control integration. Colleyville’s estate homes often have a mix of all of these on one driveway.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Colleyville
Colleyville driveways are full of FAAC, Linear, and BFT operators, many installed when these homes were built in the 1990s. Our technicians are trained and certified on nine leading gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That breadth matters in Colleyville because the correct fix on the first visit depends on knowing the brand, the board revision, and the failure pattern. We carry common FAAC and Linear replacement parts on our trucks, which means many Colleyville repairs are finished the same day we arrive.
Common Gate Repair Problems We See in Colleyville Homes
Colleyville’s housing stock is unusually consistent: large custom and semi-custom homes built between the mid-1980s and early 2000s, on lots a half acre and up. That consistency produces a predictable set of gate failures, and we have seen most of them many times.
- Clay-driven post heave. Colleyville’s black gumbo clay swells with spring rain and shrinks through 100-degree summers. Gate posts set 25 years ago simply break free, and the gate begins to sag, drag, and refuse to latch. This is the single most common gate failure in Colleyville, and the fix is a re-set post, not a new gate.
- Obsolete 1990s operators. Many Colleyville homes still run original Linear or US Automatic control boards from the 1990s. These boards cannot pair with modern safety photocells, and they fail entrapment testing. The operator is often fine mechanically; the board is simply obsolete, and the only real fix is a full operator swap.
- HOA-mandated finish matching. Colleyville HOAs in neighborhoods like Deacon Creek and the Timarron-adjacent enclaves hold visible gate hardware to strict aesthetic standards. A repair that changes the finish or the visible hardware profile can require board approval before work starts. We plan for that approval timeline instead of being surprised by it.
- Shared driveway slide gates. Several Colleyville estate lots share a driveway and a gate. When a slide gate on a shared right-of-way fails, both neighbors lose access, and the pressure to get it fixed is double. We prioritize these jobs and can run the gate in manual mode while parts arrive.
Pricing for Gate Repair in Colleyville, TX
Gate repair in Colleyville runs on a range that reflects the heaviness of the gates and the age of the automation. A hinge replacement or post re-set on a standard double-swing gate typically runs $450 to $1,100, depending on how far the post has moved and whether the concrete footing needs full excavation. A new operator for a 14-16 foot swing gate, installed and programmed with safety photocells and a loop detector, runs $2,800 to $4,500 in Colleyville. Gate realignment without post work is usually $250 to $500. Weld and rust repair on ornamental iron runs $175 to $600 per section, depending on the extent of the rust and the finish work required. Every quote is written and agreed before any work begins. If you have a written estimate from another gate contractor, bring it to us for a free second opinion. And remember: $50 off any repair over $250, and 5% off for seniors and veterans, always.
We Also Serve Cities Near Colleyville
While much of our gate repair work in Colleyville takes us through the 76034 zip code, our crews also serve the surrounding communities. We work regularly in nearby Colleyville neighborhoods and make the short drive to Bedford, Hurst, Southlake, and Euless for the same done-right, written-guarantee standard.
Serving Colleyville, TX - Our Local Coverage Area
We’re based in the Colleyville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Colleyville
In many Colleyville neighborhoods, yes. HOAs in the Timarron-adjacent enclaves and Deacon Creek often require board approval before any visible gate hardware is replaced, including operators, brackets, and sometimes even the finish. We can provide written specs and product information for your HOA review, and we factor that approval window into the schedule so it does not surprise you. Call (432) 237-4128 and we can discuss your specific neighborhood.
On most Colleyville half-acre lots, it is almost always a post problem first. The expansive clay under your lot has moved the gate post out of plumb, and the hinge is now carrying load it was never meant to carry. The hinge may be worn secondarily, but re-hanging a gate without fixing the post is a temporary patch. We inspect the post, the hinge, and the latch as one connected system. The quote you get before work starts covers what is actually wrong.
Sometimes, but on many 1990s-era Linear boards in Colleyville, the honest answer is no. The original control boards are obsolete and cannot pair with modern safety photocells, and they frequently fail entrapment testing under current code. We will always attempt a component-level repair first, but if the board is dead or unsafe, the only real fix is a full operator swap. We quote that replacement up front, in writing, before any work begins.
The February 2021 hard freeze did lasting damage to Colleyville operators that were never designed for sustained sub-20-degree temperatures. Hydraulic and electromechanical operators cracked, control boards shorted, and capacitor failures became common within weeks. If your gate has acted up ever since that week, the freeze is a likely culprit, and we can test the operator to confirm. Call (432) 237-4128 and we will diagnose it.
No. On shared driveway slide gates in Colleyville, we keep the gate in manual operation while we work, so both neighbors can get in and out. We also sequence the repair so the gate is never left open or inoperable overnight unless the homeowner specifically directs otherwise. The goal is to finish the job in one visit and leave both neighbors with a working gate and a written 90-day guarantee behind it.
The Colleyville Difference: HOA Rules, Clay Soil, and 30-Year-Old Operators
Here is what a gate repair in Colleyville demands that a gate repair in Bedford or Grapevine might not. First, the HOA. In established Colleyville neighborhoods, replacing a visible operator or changing a gate finish can require board approval before the work starts. That adds days to a job that would be same-day in unincorporated Tarrant County. We plan around it. Second, the soil. Colleyville’s black clay moves more aggressively than the sandier soils to the south, and gate posts set in that soil without proper sleeves will heave. We pour footings with 3,000 psi concrete and schedule-40 steel sleeves, and we see the difference in gates we set ten years ago that are still square. Third, the age of the equipment. The estate gates of Colleyville were built in the 1980s and 1990s, and many still run their original operators. A 1990s Linear board is not something you can pair with a modern photocell, no matter how much you like the original finish. The only real fix is a full operator swap, often under HOA review. We handle every step of that process, from diagnosis through the final HOA sign-off.
Off Montclair Drive in the Timarron area, we recently rebuilt a 16-foot double-swing gate whose hinge post had shifted a full two inches out of plumb in the expansive clay. The original 1990s Linear operator was still chattering, but the control board failed entrapment testing, so we swapped in a LiftMaster LA400 with a fresh loop detector and keypad entry, then re-set both post footings with 3,000 psi concrete and schedule-40 steel sleeves. The gate now opens smoothly and passed the homeowner’s HOA review without a single change to the ornamental iron finish.
Call Ironworks Gate Co. for Gate Repair in Colleyville
If your gate is sagging, grinding, or dead on the driveway, call (432) 237-4128. A live person answers, 24 hours a day, 7 days a week. We will schedule a visit, diagnose the problem, and give you a written price before a single bolt is turned. Every job is covered by our 90-Day Done Right Promise. We have been doing this work since 1984, and we plan to be doing it in Colleyville for another forty years. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Colleyville with gate repair and automation since 1984.