Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Keller
If your driveway gate in Keller won’t open, grinds when it moves, or hangs crooked after a dry summer, you’re dealing with a problem we see every week. Gate repair in Keller typically runs $180 to $340 for hinge and alignment work, and $450 to $1,200 for operator or control board replacement, depending on what’s actually failed. We get to Keller homeowners fast, diagnose the real cause, and quote the job before any work starts. Call (432) 237-4128 and a live person answers, day or night.
Why Ironworks Gate Co. Is Keller’s Preferred Gate Repair Company
We’ve been repairing and automating gates for over 42 years, and the homes we see in Keller tell a specific story. The neighborhoods between Bear Creek and Bourland Road, the cul-de-sacs off Rapp Road, the gated sections along 76248 and 76244 – these are boom-era subdivisions built on Tarrant County clay, and the gates in them are hitting a predictable lifespan wall. Builders put in ornamental steel and wrought iron gates twenty years ago, paired with automation that was never meant to last this long. Our technicians know what that looks like before they even pull into the driveway.
Victor Salinas, who leads Ironworks Gate Co., trains our crews to treat every Keller job like it’s on their own mother’s street. That means uniformed, background-checked technicians who show up when they say they will, explain what’s wrong in plain English, and quote an honest price up front. Our 90-Day Done Right Promise is written on every job ticket. If it’s not right, we come back and make it right. No paperwork, no arguing.
Keller homeowners call us because they’ve had a handyman take a crack at a gate and leave it worse. Or they’ve paid for an operator replacement that didn’t fix the binding. We fix the post first, then the automation. That order matters more in Keller than almost anywhere else in the metro, and we’ll explain why below.
Our Gate Repair Services in Keller
Electric Gate Repair
When a Keller gate won’t respond to the remote, the first thing we check is whether the operator is actually dead or just fighting a misaligned gate. On the clay lots around Marshall Ridge and Hidden Lakes, a post that’s shifted half an inch can make a perfectly good motor trip its safety logic and refuse to move. We test the full circuit – transformer, wiring, control board, limit switches, and safety photocells – before recommending any Gate Access Control in Keller replacement. If the motor is genuinely dead, we stock or can source parts for BFT, Linear, and Ghost Controls systems fast.
Automatic Gate Repair
Automatic gate repair in Keller often comes down to one of three culprits: a failed gearbox, a fried control board, or a gate that’s binding because the post moved. We see builder-grade operator failures on homes built in the mid-2000s all over Keller. The gate itself is still solid – the automation gave out first. We repair what’s repairable and replace what’s not, and we’ll tell you honestly which is which. On a 15-year-old operator with a cracked gearbox, for example, the smarter money usually goes toward a new unit with a fresh warranty.
Hinge & Post Repair
This is the repair most Keller gates actually need. Keller sits on reactive black clay that swells and shrinks with rain and drought. Dry summers drop the soil, wet winters heave it back. Over a decade, that cycling pushes swing gate hinge posts outward, pulling the gate out of plumb and binding the operator arm. We re-plumb the post, set a new concrete footing where needed, and re-hang the gate so it moves freely again with our Gate Parts & Welding in Keller. When the hinge geometry is right, the operator stops working against itself and the whole system quiets down.
Gate Realignment
A gate that drags on the driveway or won’t sit level in the closed position is a realignment job. In Keller, this almost always traces back to post movement from soil cycling, not a bent gate leaf. We check plumb with a level, measure the reveal gaps, and adjust the hinge placement so the gate swings true. Then we re-set the operator travel limits to match. Done right, a realigned gate feels like new and the motor runs measurably cooler.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Keller’s Soil Is Harder on Gates Than Nearly Anywhere Else in Texas
Keller is one of the most HOA-dense, upscale master-planned suburbs in Tarrant County. The neighborhoods built between roughly 1993 and 2015 came with ornamental iron driveway gates and automated community entrance gates as standard features, not upgrades. That means thousands of Keller homes now have gate systems that are 15 to 25 years old, and they’re reaching end-of-life at the same time. Operators, control boards, and hinges are all failing in a wave you don’t see in older, more mixed-stock cities like Fort Worth to the south.
But the real Keller-specific factor is the soil. The black clay under this city shrinks hard in summer drought, and driveway gates along 76244 and 76248 feel it. Our crew reset a leaning ornamental steel swing gate on a 76248 cul-de-sac last month. The LiftMaster operator arm was binding after ten years of clay heave pulled the hinge post out of plumb. We re-plumbed the post, set a new concrete footing, and re-hung the gate before the operator was re-engaged. The owner had already paid for one operator replacement that never addressed the post movement. We fixed the root cause, not the symptom. That’s the difference between Gate Repair done right and gate repair done twice.
Common Gate Repair Problems We See in Keller Homes
- Post lean from clay soil cycling. Drought drops the soil and pulls posts outward. Winter rain heaves them back. After ten years, the hinge post on a swing gate typically leans enough to bind the operator arm and burn out the motor.
- Builder-grade automation hitting end-of-life. Homes built during Keller’s 2000s boom got LiftMaster or Elite operators that were never engineered for 20 years of daily cycles. Control boards and gearboxes fail while the gate itself is still sound.
- Manual gates with no power run. Many Keller homes built in the 1990s and early 2000s have a beautiful ornamental gate that was never wired. Adding automation now means trenching under the driveway, running conduit, and retrofitting safety photocells that were never planned for in the original build.
- Slide gates that grind or lurch. On Keller’s clay, slide gate tracks settle unevenly. A track that’s dropped half an inch makes the gate lurch and the motor strain. It’s usually a track bedding issue, not a motor issue.
Can You Add Automation to a Manual Gate in Keller?
Yes, and we do it regularly. But it’s rarely as simple as bolting on an opener. The original builders didn’t run power or conduit to most of these gate positions, and many HOA-governed subdivisions in Keller have guidelines about what automation is allowed and where equipment can sit. We handle the whole scope: trenching, conduit, wiring, Keller Gate Motor & Opener, safety photocells, and setup. The good news is that a well-built ornamental steel gate is an excellent foundation for automation. A gate hung true on level hinges will run reliably for years. The work is in the power run and the safety edge retrofits, and we quote that before any digging starts.
Trusted Brands We Service in Keller
Whatever is on your driveway, we’re trained and equipped to fix it. Our Keller technicians carry diagnostic tools and programming software for nine major automation brands, and we can usually have replacement parts for BFT, Linear, and Viking systems within a day or two. We service Ghost Controls openers on lighter residential gates too. The point is, you don’t need to call a brand-specific specialist. One call to Gate Repair in Keller puts a technician in front of your gate who knows the system on it, whatever it is.
Pricing for Gate Repair in Keller, TX
A hinge adjustment or gate realignment in Keller typically runs $180 to $340, including travel. Post re-plumbing with a new concrete footing lands between $450 and $900, depending on gate size and access. A replacement operator – including labor, programming, and photocell setup – usually falls between $850 and $1,600, with higher-end slide gate systems at the top of that range. Control board replacement runs $300 to $650 on most residential systems. Every price is quoted and agreed before we turn a single bolt. You’ll also find our standing offers: $50 off any repair over $250, a free second opinion on any written estimate you’ve received from another company, and a $89 seasonal tune-up for gate and operator. Seniors and veterans get 5% off, always.
We Also Serve Cities Near Keller
We work throughout northeast Tarrant County, and the same crews that serve Keller also cover North Richland Hills, Southlake, Colleyville, and Hurst. If you’re a few miles outside city limits, call (432) 237-4128 and ask – chances are we’re already nearby that day.
Serving Keller, TX - Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Keller
Your gate’s hinge post has likely moved. Keller’s shrink-swell clay drops in drought and heaves in wet weather, and a post that’s shifted just half an inch out of plumb will make the gate bind and the operator strain. The operator isn’t the problem – it’s fighting geometry. We re-plumb the post, set a new footing if needed, and the gate swings free again. Call (432) 237-4128 to have a technician check the post alignment first, before you pay for another motor.
Yes. Most 1990s and 2000s Keller homes with manual gates never had power or conduit run to the gate position. We trench under the driveway, run the conduit and wiring, install the operator, and retrofit the safety photocells. The gate itself is usually a good candidate if the hinges and posts are solid. We’ll assess that during the estimate and quote the whole scope before digging starts.
No – grinding or lurching means something’s wrong, and on Keller’s clay it’s usually a track that’s settled unevenly or debris packed into the track wheels. The motor is often still fine, but if it keeps running against resistance, it will fail sooner. We level the bed, clear the track, and adjust the travel limits. It’s a repair measured in hours, not days.
At 15 years, your gate is in the window where builder-grade operators and control boards fail predictably. Expect hinge inspection and post alignment checks at least once a year, and plan for operator replacement if the gearbox is grinding or the board is throwing random fault codes. Our $89 seasonal tune-up covers the hinge lube, post check, operator force adjustment, and travel limit calibration. It’s the cheapest insurance you’ll buy for your driveway.
Yes. Community entrance gates run more cycles per day than any private gate, and they’re often slide gate systems with heavier steel, keypads, and telephone entry hardware. The wear profile is different – you’ll see track failures, loop detector issues, and access panel wiring problems that rarely show up on a private driveway gate. We service both, and our technicians are trained on the multi-brand access control systems found in Keller HOA communities.
Call Ironworks Gate Co. for Gate Repair in Keller
If your gate is binding, sagging, or dead in the driveway, call (432) 237-4128. A live person answers 24 hours a day, 7 days a week. We’ll schedule a Keller technician, diagnose the real problem, and quote the job before any work starts. Done right, backed in writing – the 90-Day Done Right Promise on every job.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Keller homeowners with dedicated gate repair for over 42 years.