Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGhost Controls Gate Repair in Grapevine, TX | Ironworks Gate Co.
Ironworks Gate Co. provides Gate Repair in Grapevine for independent Ghost Controls systems, from residential swing gates in Silverlake to heavy-cycle commercial operators along the SH-114 corridor. We’re not manufacturer-affiliated or authorized, which means we diagnose honestly and recommend the repair or upgrade that serves you best, not a factory replacement quota. Call (432) 237-4128 for a free estimate.
The difference here is simple. Most gate companies that show up in Grapevine learned their trade in bedroom communities like Southlake or Colleyville, where gates open maybe fifteen times a day. Grapevine sits against DFW International Airport, and our work skews toward the hotel and corporate side of gate automation: barrier arms, card-access swing gates, and slide operators that run more cycles in a week than a residential driveway gate sees in six months. We’ve serviced Ghost Controls equipment in both worlds for years, and we stock parts accordingly. For a deeper look at what we do across the brand, see Ghost Controls sales & service.
Why Grapevine Residents Choose Us for Ghost Controls Service
Ghost Controls builds solid operators, but they’re only as good as the installation and the maintenance behind them. Our techs know the TDS2, AXP, DP2, and AXDP lines well enough to diagnose a problem before the covers come off. We carry OEM control boards and remotes when a repair has to preserve exact programming, and we keep proven aftermarket gears and power supplies on the truck for the jobs where factory plastic was the weak link from the start.
Victor Salinas, our owner, grew up in Grapevine not far from Dove Road. He learned metalwork and electrical fundamentals at Tarrant County College, then spent his twenties working residential and commercial gates across the DFW side of the lake. For over two decades he’s been the person Grapevine homeowners and property managers call when a gate drags, grinds, or stops cooperating. A gate that works right should be the last thing on your mind, and that’s the standard we build to on every job.
We serve all of Grapevine and the surrounding area. For the full picture of where we work, here’s our Grapevine service area.
Common Ghost Controls Gate Repair Problems We Solve in Grapevine
- Control board failures from heat exposure. Grapevine summers regularly top 105°F, and a Ghost Controls operator bolted to an unshaded metal box can cook a control board years before its rated lifespan. We relocate boxes where possible, add ventilation, and when a TDS2 has burned through its second board, we’ll often suggest a full swap to an AXP rather than spending money on another board that won’t last.
- Limit switch drift and gate bounce. North Texas black clay expands and contracts with every wet-dry cycle, and over time that movement shifts gate posts just enough to throw limit switches out of calibration. The gate bounces, over-travels, or reverses mid-cycle. We realign, recalibrate, and where the post has shifted too far, we reset or reinforce the footing before adjusting the operator.
- Stripped plastic drive gears after ice storms. When a DFW winter ice storm glazes a gate and the motor fights the added load, the first thing to give is usually the factory plastic drive gear. We stock aftermarket gears machined from stronger material and replace them on the first visit so the gate doesn’t sit dead for a week waiting on parts.
- Receiver range loss from corroded antenna connections. Grapevine’s rapid temperature swings mean condensation forms inside operator housings overnight. Over a season or two, antenna connections corrode and your remote stops working from the street. We clean or replace the connection, reroute the antenna where needed, and range comes back.
- Hinge and post problems on older gates. Many homes near the Historic Main Street district have ornamental wrought-iron pedestrian gates that are decades old. Hinges sag, posts lean, and the Ghost Controls operator ends up fighting the hardware. We weld, reset, and realign so the motor isn’t doing the hinge’s job.
Ghost Controls Service in Grapevine: What Local Conditions Mean for Your Equipment
Grapevine’s HOA communities, particularly Silverlake, require written property management approval before any gate motor replacement or control wiring change. That’s not a suggestion; it’s an enforceable requirement, and crews that skip it end up with delayed or rejected permits and an angry board. We carry a standard approval template and coordinate directly with management companies, so your repair doesn’t stall at the board level. It’s a step technicians from neighboring cities routinely miss, and it’s the difference between a gate fixed this week and a gate that sits locked open for a month because the paperwork never moved.
That administrative reality pairs with a physical one. The black clay under Grapevine heaves and shifts with the seasons, and DFW ice storms add sudden load to automation arms and hinges. Last month our tech was called to a hotel shuttle gate on Bass Pro Drive because a Ghost Controls AXP slide motor would run but not open fully. We found the limit switch bracket had cracked from repeated post heave in the black clay, allowing the gate to drift past the fully open position. We rebuilt the bracket from steel plate, replaced the limit switch, and recalibrated travel in under two hours so the hotel’s shuttle traffic didn’t back up onto SH-114.
Ghost Controls Models & Products We Service in Grapevine
We work on the full Ghost Controls residential and light-commercial lineup: the TDS2, the AXP, the DP2, and the AXDP. On parts, our approach is pragmatic. When a repair must preserve exact programming, we use OEM Ghost Controls control boards and remotes. When the factory part is a known weak point, we stock proven aftermarket alternatives that outlast the original. For older TDS2 units with repeated board failures, we’ll usually recommend an operator swap to a newer AXP model rather than paying for another short-lived board. We keep common parts on the truck for fast turnaround across Grapevine, so you’re not waiting on a distributor in another state.
Ghost Controls Service Pricing in Grapevine
Here’s what Ghost Controls gate repair in Grapevine typically costs:
- Diagnostic visit: $45, we come out, find the fault, and explain exactly what the fix will take. This amount rolls into the repair if you hire us.
- Limit switch replacement and recalibration: $90 to $160 depending on whether the operator needs realignment from post shift.
- Control board replacement: $180 to $320 for the part, depending on Ghost Controls model and OEM versus proven aftermarket, plus $75 to $130 in labor.
- Drive gear replacement: $120 to $200 including parts and the first-visit labor.
- Full operator swap, TDS2 to AXP: $950 to $1,300 depending on gate weight, mounting work, and whether new photo-eyes or wiring are needed.
- Hinge repair or replacement: $150 to $350 per hinge depending on material, welding, and whether the post needs bracing.
Every price is quoted and agreed before any work starts. You’ll know the number before a single bolt is turned. Estimates are free, and there’s a $50 discount on any repair over $250. Call (432) 237-4128 for an exact quote on your Ghost Controls system.
Serving Grapevine, TX - Our Local Coverage Area
We’re based in the Grapevine area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Ghost Controls Gate Repair in Grapevine
That symptom usually means a limit switch has drifted out of calibration, which happens frequently here because North Texas black clay shifts gate posts with every wet-dry cycle. The operator thinks it’s reached the fully open position, detects resistance, and reverses. The fix is recalibrating the limit switches and, if the post has shifted, resetting the footing before adjusting the operator. We complete that on one visit in most cases. Call us for a diagnostic, and we’ll tell you exactly what’s wrong before any work is done.
Yes. We handle our Gate Installation in Grapevine for commercial Ghost Controls swing gates, integrating phone entry, card access, and keypad systems throughout the airport-adjacent corridor. The work involves matching the access hardware to the operator’s control wiring, which we handle without interrupting your gate’s daily traffic schedule for long. We’ll quote the full job upfront.
Yes. We’ve worked enough Silverlake properties to know the approval process inside out. We carry a standard approval template and coordinate directly with your property management company so the repair or replacement doesn’t stall waiting on board sign-off. Most approvals clear within a week when the paperwork is right the first time.
First we check the mounting location. A Ghost Controls operator bolted to an unshaded metal box on a 105°F Grapevine day will overheat regardless of the unit’s rating. We relocate the box to shaded or ventilated space where possible, clean the board and heat sinks, and test the unit under load. If the board has already been damaged by repeat thermal cycling, we replace it and address the mounting so it doesn’t happen again the next July.
We can. Many of those older wrought-iron gates near the Historic Main Street district have ornamental hinges that a hardware store replacement can’t match. We repair or re-fabricate the hinge, reset the post if needed, and then align the Ghost Controls operator so it stops fighting the hardware. The gate will swing like it was hung yesterday.
Service Areas Near Grapevine
Ironworks Gate Co. serves Grapevine and the surrounding communities. If you’re in Coppell, we offer Ghost Controls service in Coppell with the same stocked parts and first-visit fix rate. Further east, we cover Ghost Controls service in Carrollton as well. We also work regularly in Bedford, Irving, Euless, and the neighborhoods along the SH-121 and SH-114 corridors.
Book Your Ghost Controls Service in Grapevine Today
A live person answers our phone 24 hours a day, seven days a week. Tell us what the gate is doing, and we’ll get a tech out. Repair calls across Grapevine are typically handled same day. Call (432) 237-4128 for a free estimate on Ghost Controls repair in Grapevine.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Grapevine since 1984.