Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Carrollton, TX
A gate that drags across the driveway or refuses to open isn’t just inconvenient in Carrollton, it’s a daily reminder that something under the surface has shifted. Usually, that something is the Blackland Prairie clay under your gate posts, heaving after a hard rain and settling again come July. Ironworks Gate Co. repairs and realigns driveway gates across Carrollton, and we arrive already knowing what this soil does to iron. Call (432) 237-4128 and you’ll get a live person, not a voicemail tree, any hour of the day or night.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Carrollton Homeowners Choose Ironworks Gate Co.
We work on gates the way a blacksmith fits a latch: the job is correct and it holds. That means truing posts that the clay has walked out of square, re-hanging a leaf that’s dropped half an inch on the hinge side, and dialing in a limit switch so the motor stops at exactly the right spot. Homeowners in the neighborhoods around Josey Lane and closer to Indian Creek Golf Club call us because the fix lasts longer than a season. Every job, from a chain-link gate near Old Town Carrollton to a big ornamental driveway gate in a newer HOA community, is protected by our written 90-Day Done Right Promise. If it’s not right, we come back and make it right. No paperwork, no argument.
Our technicians are background-checked and uniformed. The man who walks up your driveway is the same standard we’d send to our own mother’s house. And when you call at 2 a.m. because the gate won’t close and the dog is getting ideas, Victor Salinas and the team answer the phone live. That’s the whole point of a gate company: you shouldn’t have to wait until Monday for your own driveway to work.
Gate Repair Services We Offer in Carrollton
Gate Repair
A sagging leaf, a post that’s drifted out of plumb, a hinge that shrieks every time the wind moves the gate. This is our bread and butter in Carrollton, and we see the same culprits year after year: clay soil movement, worn weld points, and rollers ground flat from years of use. We quote the repair before we start, and most jobs are finished in one visit.
Learn more about our Gate Repair in Carrollton.
Gate Installation
A new driveway gate in Carrollton needs a footing that can handle North Texas clay without heaving. We dig, set, and build for the soil we actually have here, not the soil a catalog assumes you have, and we run the automation the same day the iron goes up. You get a written price before we order a single stick of steel.
Learn more about our Gate Installation in Carrollton.
Gate Motor & Opener
Carrollton winters are hard on gate operators, and the freeze-thaw cycles we get every few years are harder. We carry parts for nine opener brands, including Mighty Mule repair in Carrollton and Linear, so we can usually repair a dead opener the same day we look at it. When the motor is beyond saving, we can replace the operator and reset your remotes and keypad to match.
Learn more about our Gate Motor & Opener in Carrollton.
Gate Access Control
Keypads, intercoms, telephone entry, and loop detectors. We install and service Gate Access Control - Carrollton on single-family driveway gates and on the larger community entrances you see around HOA neighborhoods near Trinity Mills. We keep the wiring tidy, label everything, and program remotes before we leave.
Learn more about our home access solutions and what we can configure for your property.
Gate Parts & Welding
A cracked weld on an ornamental iron gate is a job for someone who welds, not someone who replaces parts until something works. We carry and fabricate our Gate Parts & Welding in Carrollton, from hinge pins to custom pickets, and our welders repair cracks rather than hiding them under plate steel. If it can be welded true, we weld it.
Learn more about our home services or call for a straight answer on whether a part is worth repairing or replacing.
Neighborhoods We Serve in Carrollton
We work all over Carrollton, and we typically reach any address in the city within a couple of hours of your call. These are a few of the areas we’re in most weeks:
- Josey Lane corridor and the HOA neighborhoods east of it
- Neighborhoods around Indian Creek Golf Club
- Old Town Carrollton and the pre-1960s streets near the DART station
- Communities along Trinity Mills Road between Marsh and Midway
- Subdivisions off Hebron Parkway toward the Lewisville line
Why Carrollton’s Climate & Housing Affect Gate Repair
Carrollton was built out fast between the late 1970s and the early 2000s, and that rapid suburban expansion left a city of deed-restricted HOA neighborhoods sitting directly on North Texas Blackland Prairie clay. That clay is the root cause of the most common gate repair call in this city: a gate that scrapes the driveway after spring rains and swings loose again by August. The soil swells, the post leans, the gate drags. You can align the gate perfectly today and the ground will move it again before winter. It isn’t that your installer did a bad job. It’s that the ground under your gate posts is alive and it has an opinion.
Add to that the winter ice events we’ve seen here, including the February 2021 freeze that left operators all over Carrollton iced solid and split more than a few cedar pickets, and you have a repair profile that’s specific to this part of North Texas. Our work accounts for both forces: deeper footings and better drainage where the clay runs worst, and weather-sealed operator housings where the freeze hits hardest. Good gate work in Carrollton means building for the ground and the sky, not just the opening.
Pricing for Gate Repair in Carrollton
Most gate repairs in Carrollton fall into predictable ranges, and we quote every job before the work begins. Here’s what we typically see:
- Service call and on-site diagnosis: $89, credited toward the repair if you proceed
- Gate realignment and post shimming: $150-$350 depending on post condition and how far the clay has moved it
- Roller, hinge, or wheel replacement: $95-$220 per side
- Weld repair, per cracked joint: $90-$185 depending on access and iron thickness
- Opener motor or control board replacement: $300-$900 depending on brand, with BFT and Linear parts typically on the lower end of that range
- Full ornamental driveway gate with operator: $2,800-$7,500 depending on width, material, and automation features
We also run a standing Senior and Veteran 5% discount on every job, and right now you can take $50 off any repair over $250. Call us and we’ll give you the exact number before any work starts.
Service Area - Cities Near Carrollton
Our Carrollton crews also cover the surrounding North Dallas suburbs. If your property sits closer to the county line, we serve Coppell and Lewisville to the west, Grapevine to the southwest, and Euless down near the airport.
Serving Carrollton, TX - Our Local Coverage Area
We’re based in the Carrollton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Carrollton
Most repair jobs in Carrollton run between $150 and $500, depending on whether we’re realigning a post, replacing rollers and hinges, or welding a cracked joint. We quote a firm price before starting, and the quote is the price you pay. Call (432) 237-4128 for an exact number on your gate.
In most cases yes. We keep repair crews on the road in Carrollton every weekday, and we can typically reach your address within a couple of hours. If your gate is stuck open or won’t close and you need it secured tonight, call us any hour and a live person will tell you exactly when we can be there.
A full installation includes demolition and haul-off of the old gate if needed, new posts set for Carrollton’s clay soil, the gate itself, the opener motor, remote controls, and programming. We’ll also run a safety check on the final install. You get a written price before we order materials, and the final bill matches the quote. Call for a free measure.
Yes. We run the electrical from your panel to the opener, install the safety edges and photo eyes, and set the force limits so the gate stops if it meets resistance. Carrollton codes require safety features on automated gates, and we don’t cut corners on any of it. That’s part of the 90-Day Done Right Promise.
We do. Many Carrollton HOAs call us for the big ornamental entrance gates on the neighborhood roads, especially around Indian Creek and the Josey Lane corridor. Those gates also answer to the same clay soil, and we service the operators, access keypads, and structural iron. Call our office and we’ll send a tech who’s worked on community gates, not just driveway gates.
We dispatch from our Dallas-Fort Worth metro office, with crews serving Carrollton directly. When you call, someone answers in Texas. When you schedule a visit, the tech shows up in an Ironworks Gate Co. truck with parts and tools on board. We’re not routing your job to a subcontractor we’ve never met. Call (432) 237-4128 and you’ll talk to a person who knows what your gate is doing and why.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Carrollton with the right fix, the first time.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Carrollton Customers Say
"The photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that a sprinkler head was spraying it every morning, which is why it kept happening."
- Jamal Dawson"The gate works properly now and the price was fair. It did take two visits, because the operator we have is old and the part had to be ordered. They did not charge for the second trip."
- Carrie Mercer"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one on the truck, and we were moving cars again inside an hour."
- Chris Gallagher