Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Irving, TX
When a driveway gate stops closing in Irving, the problem is rarely simple. Our crews see it every week: a gate that worked fine in October suddenly binds in January, not because the motor failed, but because the Blackland Prairie clay underneath the post heaved after a hard rain. That’s the kind of diagnosis you only learn by working in this soil, on these gates, season after season. If your gate is stuck, sagging, or refusing to respond, call (432) 237-4128 and a live person will answer, any hour, any day. We serve every corner of Irving, from Valley Ranch to Las Colinas to the older ranch-style neighborhoods south of 183.
Key Takeaways
- Gate repair in Irving typically runs $180-$480 for common fixes, with full operator replacement ranging $850-$2,400 depending on brand and gate type.
- Most repairs are completed in one visit, with the price agreed in writing before any work begins.
- Clay soil movement is the single most common cause of gate failure in Las Colinas and Valley Ranch.
- Every job is covered by our written 90-Day Done Right Promise.
- We service nine major opener brands, so the correct fix happens on the first trip.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Irving Homeowners Choose Ironworks Gate Co.
Ironworks Gate Co. is the dedicated gate specialist for homeowners who have lived in Irving for twenty years or more and plan to stay another twenty. That description fits a lot of this city, and it fits the way we work. We don’t patch a gate and hope it holds until the invoice clears. We find why it failed, fix that, and stand behind it in writing.
In Valley Ranch, where original 1980s swing-gate operators are now fully obsolete, we replace complete systems with modern motors sized correctly for the gate’s weight and wind load. In Las Colinas, where HOA-governed community entrances share maintenance contracts, we work through association approval processes without making the homeowner chase paperwork. Our technicians are background-checked and uniformed, and they treat your driveway the way they’d treat their own mother’s. We carry certification across nine gate-automation brands, including Viking, Linear, and BFT, so whatever is bolted to your gate, we know it. And every job, from a hinge replacement to a full slide-gate rebuild, is protected by our 90-Day Done Right Promise: if it isn’t right, we come back and make it right. No paperwork, no arguing.
Gate Repair Services We Offer in Irving
Gate Repair
A sagging gate is almost always a post problem in Irving, not a hinge problem. The clay expands and contracts, and the post moves with it. We realign posts, rebuild hinge mounts, straighten cantilever slide gates knocked off their rollers by spring storms, and get your gate closing square again. Learn more about our Gate Repair in Irving.
Gate Installation
A new gate is an investment measured in decades, not seasons. We size the steel, set the posts below the clay’s active zone, and match the operator to the gate’s true weight and exposure. Every installation is quoted in writing, with no surprises when the invoice arrives. Learn more about our Gate Installation in Irving.
Gate Motor & Opener
Irving’s sustained 100-degree summers cook circuit boards and UV-crack wiring insulation on exposed installations. When a motor fails, we diagnose whether it’s the control board, the limit switch, the capacitor, or the motor itself, then replace only what’s dead. If the operator is obsolete and parts are no longer manufactured, we’ll tell you straight and quote a modern replacement. Learn more about our Gate Motor & Opener in Irving.
Gate Access Control
Keypads, intercoms, vehicle loop detectors, and phone-based entry systems all fail eventually, and often at the worst time. We install and repair access control on private driveways and HOA community entrances across Irving, and we make sure the system works before we leave.
Gate Parts & Welding
When a hinge ear snaps or a picket rusts through, welding is the right repair, not a patch plate. Our welders work in steel and wrought iron, matching the original work so the repair doesn’t look like a scar. We also fabricate replacement parts when the manufacturer no longer makes them.
Neighborhoods We Serve in Irving
Our trucks are in Irving daily. Response times run same-day for most repair calls and next-day for scheduled work, depending on the season. We regularly work in neighborhoods across the city, including:
- Valley Ranch
- Las Colinas
- University Hills
- MacArthur Corridor
- Heritage District
Why Irving’s Climate & Housing Affect Gate Repair
Las Colinas was built out primarily from the mid-1980s through the early 2000s, and it created one of the densest concentrations of ornamental wrought-iron automatic gate systems in the Metroplex. Those gates, now 20 to 35 years old, are hitting their failure cycles at the same time. Circuit boards die from heat exposure, gearboxes wear out, and the posts underneath everything are shifting in the region’s expansive clay soil. Post realignment is the near-universal first step on a Las Colinas or Valley Ranch service call, because nothing else you do to a gate matters if its posts are no longer plumb.
Then there’s the weather. Irving sits squarely in a high-frequency severe-weather corridor, and spring straight-line winds routinely bend cantilever slide gates off their rollers and snap swing-gate hinges welded to posts already stressed by the clay. We don’t just weld the hinge back on. We check the post, the alignment, and the gate’s balance before we weld anything, because a repair that ignores the cause won’t last until the next storm.
Pricing for Gate Repair in Irving
Honest numbers, up front. Here’s what typical gate repairs run:
- Post realignment: $250-$500 depending on post size and whether concrete work is needed.
- Hinge replacement or weld repair: $180-$380 per hinge, depending on the weight of the gate and welding time.
- Control board replacement: $220-$650 depending on brand and board availability.
- Full operator replacement: $850-$2,400 installed, depending on gate weight, swing versus slide, and opener brand.
- Seasonal tune-up: $89 flat, including chain tension, limit settings, safety-edge test, and lubrication.
Every price is quoted and agreed before any work starts. You’ll know the number before we turn a single bolt. Standing offers that apply to every Irving job: $50 off any repair over $250, a free second opinion on any written estimate, and a permanent 5% senior and veteran discount. Call (432) 237-4128 for an exact quote, estimates are free.
Service Area - Cities Near Irving
If you’re in a neighboring community, we serve those too. See our pages for Gate Repair in Carrollton, Gate Repair in Coppell, Gate Repair in Euless, and Gate Repair in Grapevine. Irving is our home territory, but the same crew and the same guarantee cover the entire area around it.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Irving
Most gate repairs in Irving run between $180 and $480, with full operator replacements ranging from $850 to $2,400 depending on gate type and brand. Post realignment from clay movement typically costs $250 to $500. The exact price is quoted and agreed before any work starts, so there are no surprises on the bill. Call (432) 237-4128 for a free estimate.
Irving’s Blackland Prairie clay expands when wet and contracts when dry, which shifts gate posts and throws the gate out of alignment. A gate that binds after rain usually means the posts have moved, not that the motor failed. We realign the posts and reset the operator, and the problem stays fixed. If your gate is stuck after a storm, call us and we’ll come look.
Yes. Many original Valley Ranch swing-gate operators, especially early Viking, Linear, and LiftMaster models, are now obsolete and no longer manufactured. We replace them with modern operators sized to the gate’s actual weight and wind exposure, and we handle the full install, including safety edges and any control wiring. The quote includes everything, in writing, before we start.
We do. Las Colinas and Valley Ranch have a high concentration of HOA-governed gated entrances, and we work under association approval processes and shared maintenance contracts regularly. If your HOA needs a gate repair or a scheduled maintenance program, we’ll coordinate directly with the board and provide documentation for their records.
In most cases, yes. We answer the phone 24 hours a day, 7 days a week with a live person, not a voicemail tree. If your gate is stuck closed and you can’t get a vehicle out, tell us that and we’ll prioritize the call. Same-day dispatch is common for repair calls in Irving, depending on the season and the time of day. Call (432) 237-4128 and we’ll tell you exactly when we can be there.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Irving with gate repair, installation, and automation services for over 42 years.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Irving Customers Say
"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one on the truck, and we were moving cars again inside an hour."
- Chris Gallagher"Reprogrammed every clicker in the community and set up the keypad codes. Patient with a very long list of residents."
- Devon Ingram"The repair is holding. He was quite a bit later than the window I was given and the office did not call me about it, I had to call them. The work itself was done well once he arrived."
- Ruben Morales