Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.





Fast, Reliable Gate Installation Across Colleyville
A new driveway gate in Colleyville typically runs $4,800 to $14,500 installed, with custom ornamental steel and automation on the upper end. Most full installations take two to four working days once materials are on site, and we quote the entire job in writing before the first post hole is dug. Ironworks Gate Co. knows this city’s estate lots, its HOAs, and its soil better than most outfits because we have been working these streets long enough to see what the black clay does to a gate over twenty years. If you are in Colleyville and the gate is sagging, dead, or simply out of style for the house it guards, call (432) 237-4128 and we will measure it, price it, and set a date.
Key Takeaways:
- Full driveway gate installations in Colleyville run $4,800-$14,500 depending on size, material, and automation.
- Most jobs are completed in a single visit once fabrication is finished, with upfront pricing agreed before any work begins.
- We handle HOA-required submissions and match hardware to neighborhood aesthetic standards in Deacon Creek, Timarron-adjacent enclaves, and similar communities.
- A live person answers the phone 24 hours a day, 7 days a week. No voicemail trees.
- Every installation is backed by the written 90-Day Done Right Promise.
Why Ironworks Gate Co. Is Colleyville’s Preferred Gate Installation Company
Colleyville is not a city where a one-truck handyman can hang a gate and disappear into the Metroplex. The homes here sit on half-acre to one-plus-acre lots, the gates are often 14 to 16 feet wide, and the HOAs in established neighborhoods like Deacon Creek and Timarron-adjacent enclaves keep a close eye on what goes up and what comes down. We have worked inside those rules long enough to know which finishes pass review and which submissions get returned. Our technicians are background-checked and uniformed, and they arrive with the full scope of the job in hand: fabrication notes, operator wiring plans, and footing specs matched to Tarrant County’s expansive clay.
Victor Salinas has led our crews through hundreds of gate installations across the Metroplex, and the standard he sets is simple: the gate should close like the day it was hung, ten years from now. That means deeper footings, heavier hinges, and operators sized for the load rather than the brochure. We do not cut corners on the parts nobody sees, because in Colleyville the part nobody sees is the part the soil will expose within two years. Homeowners here have a long memory for a contractor who overpromised. We would rather underpromise and let the gate do the talking.
Our Colleyville customers call us for exactly this reason. They have lived in their homes for twenty years or more. They are not shopping the cheapest bid. They are looking for the last gate company they will ever have to call. That is the customer we build for.
Our Gate Installation Services in Colleyville
Every gate we install in Colleyville is fabricated or sourced for the specific opening, the specific swing arc, and the specific load. We do not hang a catalog gate on a custom opening. The sub-services below cover what we do most often on the estate lots along streets like Pleasant Run Road, Hall-Johnson Road, and Glade Road. Our Gate Installation team handles the full scope from excavation to final programming.
Driveway Gate Installation
The typical Colleyville driveway gate is a 14 to 16 foot double-leaf ornamental steel or wrought-iron structure, often mounted on brick or stone pillars that predate the gate by decades. We install new gates with post inspections included. If the existing posts are true and the footings are sound, we can often reuse them. If the clay has moved them, we say so plainly and quote new footings rather than patching a problem you will inherit in the next wet spring.

Pedestrian Gate Installation
Many Colleyville estates have a separate pedestrian gate beside the driveway gate, often matched to the same ornamental pattern. These gates are lighter but share the same post-heave vulnerability. We also install pedestrian gates with integrated access control: a keypad, a card reader, or a video intercom station paired to the home. It is a small structure, but it needs the same footing discipline as the big gate.

Sliding Gate Installation
Cantilever slide gates work well on Colleyville lots where a long, straight driveway gives room for the gate to travel. They do not sweep an arc, so they are ideal when the driveway wraps close to landscaping or a fence line. We build and hang steel slide gates sized for the opening and the operator, with track or cantilever setups depending on the grade. The clay soil that heaves a swing post will still affect a slide gate’s guide rollers, so we set slide gates on foundations that resist the same movement.

Swing Gate Installation
Double-swing gates are the defining feature of Colleyville’s estate streets. The math on a heavy ornamental swing gate is unforgiving: add wrong hinge placement to a post that moves, and the operator burns out within a few years. We hang swing gates on heavy-gauge hinges mounted to posts we have either confirmed true or replaced. We also match the gate’s swing speed and force to the operator, so the gate does not slam, creep, or chatter.

Double Gate Installation
Most Colleyville driveway entrances are double gates, and we treat them as a matched pair. The two leaves need to meet evenly at the center, and they need to do it for years after the clay has had its way with the posts. We build and set double gates with adjustability in the hinge system where practical, so that a slight post movement can be corrected without tearing out the whole structure.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Colleyville
We install and service operators from FAAC, BFT, Linear, and Viking, among others. Colleyville homeowners often inherit whatever operator the builder installed in 1995, and many of those boards are now obsolete. When we replace them, we recommend operators we can support with local parts and real service, not a mail-order board that will leave the gate dead for two weeks. We stock common parts for the Metroplex, and our trucks leave the shop prepared for the brands most often found on Colleyville driveways. The operator matters less than whether the company installing it will answer the phone when it acts up. We answer.
Common Gate Installation Problems We See in Colleyville Homes
- Post heave from expansive clay. Colleyville’s black clay swells in wet springs and shrinks in 100°F summers. Swing gate hinge posts move out of plumb, the leaves bind, and the operator strains until its limit switches or motor fail. This is the single most common root cause we find behind a dead Colleyville gate.
- Obsolete control boards on old operators. A 1990s-era Linear or US Automatic board fails, and the part is no longer made. The gate cannot talk to modern keypads, intercoms, or phone entry without a full operator swap, which in neighborhood like Deacon Creek often needs HOA approval before the visible hardware changes.
- Hard-freeze damage to hydraulic and electromechanical operators. The February 2021 storm cracked operators across Colleyville that were never designed for sustained sub-20°F temps. Gates stuck half-open, and many homeowners discovered the brand on the motor was no longer supported.
- Underbuilt footings from the original install. A 16-foot ornamental double gate is heavy. When the original installer poured shallow footings to save time, the first wet spring pulls the posts. We excavate and pour new footings 4 feet deep, which is what the soil here actually requires.
Pricing for Gate Installation in Colleyville, TX
A solid steel or ornamental driveway gate installation in Colleyville runs $4,800 to $8,500 for a standard 12 to 14 foot single gate with basic automation. A 16 foot custom double-swing estate gate with heavy ornamental work, matched hardware, and a premium operator runs $9,500 to $14,500 installed. Slide gates with cantilever foundations and underground conduit run $8,000 to $13,000 depending on length and grade. Pedestrian gates with access control typically run $1,800 to $3,500. Every price is quoted and agreed before any work starts. You will see the full number on paper, including materials, labor, and automation. We do not surprise a homeowner with a bigger invoice after the concrete is poured. Call (432) 237-4128 for a free measure and a written estimate.
We Also Serve Cities Near Colleyville
Our crews also handle Gate Installation in Colleyville and the surrounding area, including Bedford, Hurst, Southlake, and Euless. If you are just outside the Colleyville city line, call us anyway. A live person will answer and tell you plainly whether we can get a truck to your street this week.
Serving Colleyville, TX - Our Local Coverage Area
We’re based in the Colleyville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Colleyville
It depends on the HOA’s covenants, but yes - in many established Colleyville neighborhoods, especially Deacon Creek and Timarron-adjacent enclaves, the HOA requires written approval before any visible change to the gate structure or the operator housing. We prepare submittal packages with drawings, finish samples, and operator specs, and we handle the submission for you. The work does not start until the HOA signs off, and your price quote includes that wait time. Call (432) 237-4128 and we will pull the specific covenants for your street before we even come out to measure.
The reason is the expansive black clay under your posts. Colleyville’s wet springs swell the soil and lift the post footings, and the baking summers shrink them back, but never perfectly back. Over two or three seasons, the hinge posts drift far enough that the leaves bind. The real fix is new footings poured to 4 feet deep with proper reinforcement, not just a hinge adjustment. We can pull a post, inspect the footing, and tell you whether it is a patch job or a permanent fix. Estimates are free, and the price is agreed before any digging starts.
Yes. A cantilever slide gate is often the better solution for a long, straight driveway or a property with a guard shack, because the gate travels along the fence line instead of sweeping into the drive. We build and install slide gates sized for the exact opening, set on a proper reinforced foundation with hidden underground conduit for the operator and access control wiring. The price depends on the length and the finish, but a typical Colleyville cantilever slide installation runs $8,000 to $13,000. Call and we will measure it and walk you through the options.
The honest answer is that if the board is no longer made and no replacement part exists, a repair is not possible. Boards from 1990s-era Linear and US Automatic operators are often unpairable with modern keypads and intercoms. The fix is a full operator swap, and in a neighborhood like Deacon Creek, that means the HOA needs to approve the new visible hardware. We can handle the submission, match the replacement operator to your gate’s weight and usage, and have the new system running in a day or two once parts are on the truck. Call (432) 237-4128 and we will identify the board over the phone and give you a straight answer before the first truck rolls.
We recommend operators and components rated for sustained cold, and we install them with seals and heat tape where the manufacturer allows it. The February 2021 storm cracked hydraulic and electromechanical operators across Colleyville that were never designed for sub-20°F stretches. When we install a new operator, we size it for the gate and the climate, and we explain what winter prep you can do yourself and what should be left to a technician. A live person is on the phone 24 hours a day, and if your gate freezes at midnight, we will answer. Call (432) 237-4128 for a free estimate on a freeze-resilient operator.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Colleyville and the surrounding Metroplex.
Before
After
Before
After
Before
After