Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Double Oak
Gate installation in Double Oak, TX runs $4,800 to $18,500 for a typical ornamental automated driveway entry, and most jobs are quoted, approved, and scheduled within ten days. If you live on one of the acreage properties off Cross Timbers Drive, Waketon Road, or along the equestrian corridors near Cedar Crest Court, you already know this town is not like the tract-home suburbs around it. The lots are larger, the driveways are longer, and a gate here has to do two jobs at once: present the home properly at the street, and handle the working realities of a horse property. Ironworks Gate Co. sends crews into Double Oak every week, and you can reach a live person at (432) 237-4128 any hour to talk through what you need.
Why Ironworks Gate Co. Is Double Oak’s Preferred Gate Installation Company
Double Oak homeowners tend to keep their properties for twenty years or more. That means most of our work here is not a first-time gate; it is a replacement for a gate that was undersized, under-powered, or installed on footings that never stood a chance against Denton County’s black clay. We have measured, fabricated, and hung gates along Kings Road, Simmons Road, and the larger parcels east of Chinn Chapel Road. The common thread is that the owners want a gate that closes quietly, opens every time, and does not need attention. That is the job we take.
Victor Salinas has led Ironworks Gate Co. for over forty years, and the crews that work in Double Oak are background-checked, uniformed, and trained on nine opener brands. A live person answers our phone 24 hours a day, seven days a week. No voicemail trees. No answering service. And every installation in Double Oak carries the 90-Day Done Right Promise: if it is not right, we come back and make it right, in writing, with no paperwork and no arguing. That is the Keystone Standard on every job, from a simple pedestrian gate to a custom eighteen-foot ornamental double swing.
Our Gate Installation Services in Double Oak
Driveway Gate Installation
Most driveway gates we install in Double Oak are custom-fabricated ornamental steel or wrought-iron, sized to a long private driveway off roads like Carruth Lane or Fox Trot Court. These are not stock gates. We build to the opening, match the existing fence or stonework where it makes sense, and pair the gate with an operator sized for daily use. On a 1-to-5-acre lot, the gate is usually the first thing a visitor sees, so proportion and finish matter as much as the motor.
Pedestrian Gate Installation
On Double Oak properties where the driveway gate handles vehicles, a separate pedestrian gate often serves the walk to the front door or a side path to a barn. We install these with the same attention to latch geometry and post anchoring as the big gate. A pedestrian gate that sags or drags is usually a sign the post was never set deep enough for clay soil, and in Double Oak, that is the first thing we address.
Sliding Gate Installation
For long driveways with limited swing clearance or a slope near the road, a sliding gate is often the better answer. We install rack-and-pinion and cantilever slide gates across Double Oak, and these work particularly well on equestrian parcels where a swing gate would conflict with fencing or pasture runs. A slide gate on uneven ground needs a true, level track and a properly engineered foundation, and we pour to depth rather than setting on pavers.
Swing Gate Installation
Double Oak has a lot of ornamental double swing gates, and they are the most demanding to keep in plumb because Denton County clay heaves and contracts through every wet-dry cycle. When we install a swing gate here, our standard is a footing set 42 inches deep or more, with the hinge posts tied so they move together. That depth makes a real difference five years later, when the ground has shifted a dozen times and the gate still closes square.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Double Oak
Ironworks Gate Co. is factory-trained and equipped on nine automation brands, so the operator on your new Double Oak gate is a brand we actually know how to set up and service, not one we are learning on your driveway. On most installations in this area we specify LiftMaster, BFT, or Linear operators because they hold up well to Texas heat and frequent cycling. We also stock opener parts for Viking and Ghost Controls for Double Oak customers, which shortens turnaround when something fails. You will not hear us say a brand is out of our wheelhouse, because if it opens and closes under power, we work on it.
Common Gate Installation Problems We See in Double Oak Homes
- Black clay heave throwing posts out of plumb. The expansive soils along the Trinity River basin expand dramatically when wet and shrink when dry. A gate post set only 24 inches deep will lean within a few seasons, and a gate that dragged once will drag again after every hard rain. We set Double Oak footings deeper than suburban code minimums because the soil here demands it.
- Ice-storm damage to operators and seals. February 2021 froze a lot of Double Oak gate operators solid, and cracked hydraulic seals on older swing systems. A new installation here should include winterization: correct lubrication, heated or insulated operator housings where practical, and a plan for what happens when ice coats the track.
- Missing bypass hardware on equestrian-adjacent gates. Many Double Oak lots back up to the town-maintained equestrian trail network. If the automated gate fails, a rider on horseback still needs to get through. We see gates without a working manual release, and that is worse than inconvenient, it traps horses and riders on the wrong side. We test bypass operation on every install.
- One operator doing two jobs it was never sized for. When a property has both a decorative driveway entry and a working pasture gate, owners sometimes try to run both off a single undersized system. The driveway gate cycles a few times a day; a pasture gate may cycle twenty times a day. Specifying separate operators for each gate, each sized for its load and frequency, is standard practice for us here.
Pricing for Gate Installation in Double Oak, TX
A single ornamental steel driveway gate in Double Oak typically runs $4,800 to $8,500 installed, including the operator, safety sensors, and the post work. A full custom double swing gate on an estate entrance, 14 to 18 feet wide, usually lands between $9,500 and $18,500 depending on the fabrication details, automation package, and any intercom or camera integration. A pedestrian gate alone runs $1,400 to $2,800. A rack-and-pinion slide gate for a pasture or paddock run generally falls between $2,800 and $5,500. The price you are quoted is the price on the bill, agreed before a single bolt is turned. Every estimate is free, and we are glad to walk the property with you before you commit to anything. Call (432) 237-4128 and we will come measure.
We Also Serve Cities Near Double Oak
While this page speaks to Double Oak homeowners, our crews also cover Gate Installation in Double Oak neighbors in Grapevine, Coppell, Carrollton, and Bedford. If you are just outside the Double Oak town limits, the same crew that works the equestrian parcels here can reach you quickly. For the full scope of what we build and install, see our Gate Installation page.
Serving Double Oak, TX - Our Local Coverage Area
We’re based in the Double Oak area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Double Oak
Black clay in Denton County expands when wet and shrinks when dry, and that movement will shift a shallow gate post out of plumb within a few seasons. In Double Oak, we pour gate post footings 42 inches deep or deeper and use concrete collars around the hinge posts so both posts move together during wet-dry cycles. This is the single biggest reason a Double Oak gate installed correctly will still close squarely ten years later, while a gate installed on shallow footings starts dragging within three. Call (432) 237-4128 and we will explain how we would set yours.
Yes, and on those gates we configure manual-release bypass hardware as a standard part of the installation, not an add-on. The town-maintained equestrian trail network runs behind or adjacent to many Double Oak lots, and a rider or pedestrian on the trail must be able to open the gate even if the operator loses power or fails. We verify pull-cord or key-switch operation on every install that touches a trail easement, and we show you how to use it before we leave. Call (432) 237-4128 to schedule a look at your easement.
It can, but in Double Oak we almost always recommend separate operators. A driveway gate cycles a handful of times a day; a pasture gate on a working equestrian parcel may cycle twenty times or more. Running both off one control board and one operator means the undersized component fails early and takes both gates down. We design dual-gate systems with independent operators, separate sensors, and one clean control layout, so a pasture issue never locks you out of your driveway. Call (432) 237-4128 for a free property walk and a clear plan.
A new automated gate in Double Oak should be winterized for North Texas ice storms, which means cold-rated hydraulic fluid where applicable, correct lubrication on the slide track and hinges, and an operator housing that gives the motor and control board some protection from freezing rain. February 2021 froze operators and cracked seals on a lot of gates in this town, and the repair bills were higher than the cost of preparation. On every new install we do in Double Oak, winterization is part of the job, not a seasonal upsell. Call (432) 237-4128 and ask what your new gate would include.
Yes, every automated gate installed in Double Oak is required by code to include entrapment protection: photo eyes, contact edges, or an inherent obstruction sensor on the operator itself. We install UL 325-compliant protection on every gate we build or automate, and we test it before the job is done. If you are replacing an older gate that lacks working safety devices, that replacement of sensors is part of the quote, not an extra. Call (432) 237-4128 and we will walk you through what your specific gate needs.
Contact Ironworks Gate Co. for Gate Installation in Double Oak
If you are ready to replace an old gate on your Double Oak property, or you are planning a new build and want the gate done once and done right, call us at (432) 237-4128. We will answer in person, talk through your property, and schedule a free measure and written quote. No pressure, no vague numbers, and no surprise on the invoice. Victor Salinas has built Ironworks Gate Co. on the idea that a gate should work like the day it was hung, and every Double Oak gate we install is covered by the 90-Day Done Right Promise. That is the deal, in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Double Oak with gate installation and repair for over 42 years.