Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Trophy Club
A new driveway gate in Trophy Club typically runs $4,200 to $11,800 for a fabricated steel swing or sliding gate with automation, and most installations take two to four weeks from HOA sign-off to final walkthrough. If you’re reading this because a gate finally gave out, or because you’ve wanted one for years, you’re in the right place. Our crew knows Trophy Club’s neighborhoods, its HOA boards, and its soil better than any generalist contractor ever will. Call (432) 237-4128 and a live person, not a voicemail tree, will answer.
We’re Gate Installation specialists, not a fencing company that does gates on the side. For over 42 years, Ironworks Gate Co. has fabricated, hung, automated, and stood behind driveway and estate gates. Trophy Club properties demand a particular kind of care: ornamental steel that matches a 30-year-old streetscape, operators that run quiet, and hardware that won’t shift when the clay does. We plan for all three before the first concrete pour.
Key Takeaways:
- Trophy Club HOA design review is mandatory before any gate work. We handle the documentation.
- Clay-soil heave is the number one reason gates here rack and bind. Our footings account for it.
- Golf-course corridor gates wear harder. We spec heavier hinges and latch catches on those rear gates.
- Every job gets a written 90-Day Done Right Promise, and the price is settled before work starts.
Why Ironworks Gate Co. Is Trophy Club’s Preferred Gate Installation Company
Victor Salinas, who leads our Trophy Club work, grew up on a welding bench and has spent thirty years hanging gates that heavy Texas soil tries to move. That matters here. Trophy Club sits on Blackland Prairie-adjacent clay that swells when wet and cracks when dry. A gate post set with a standard 36-inch footing can drift a half-inch in one season. We dig deeper, set heavier-gauge posts, and walk away knowing the gate will swing true through the next drought and the next freeze.
Homeowners in Trophy Club tend to have lived in their homes twenty years or more. They’ve already been disappointed by a contractor who showed up late, quoted low, and disappeared when the gate went out of plumb. We’re built for the opposite. Every technician who rolls into Trophy Club is background-checked, uniformed, and trained on nine gate-automation brands: FAAC, BFT, Linear, Viking, and five more. One visit handles most jobs because we stock parts in our DFW metro shop, not in some warehouse three states away.
Our customers here don’t ask for the lowest bid. They ask two questions: will it pass the HOA, and will it still work five years from now? Both get a straight answer. The written 90-Day Done Right Promise, what we call the Keystone Standard, covers every installation from the first weld to the last limit-switch adjustment.
Our Gate Installation Services in Trophy Club
We fabricate and install the full range, but in Trophy Club four types dominate because of how the neighborhoods were built and how the properties sit.
Swing Gate
Swing gates are the classic Trophy Club look: a pair of ornamental leaves, one or two posts, and a quiet operator. The challenge here is the clay under the hinge posts. We set swing-gate posts in 48-inch footings with engineered backfill, then re-check plumb after the first wet season. A standard swing gate installation in Trophy Club runs $4,200 to $8,500 for a single leaf, and $7,000 to $13,500 for a double.
Double Gate
Most front driveways in Trophy Club’s larger lots are wide enough to need a double swing or double sliding gate. Two leaves mean two hinge posts, twice the soil movement to manage, and a tighter choreography between the operators. The benefit is a wider opening without a long slide track, and a heavier ornamental look that matches the HOA’s wrought-iron standard. We bolt and weld each leaf separately, then tune the open and close timing so both leaves land without slamming.
Security Gate
A security gate in Trophy Club usually means a taller, heavier panel, a mag-lock or electronic strike, and an intercom or camera at the curb line. Some properties along the golf course corridors also want pedestrian gates matched to the main driveway leaf. We run power underground to the operator, mount the keypad or reader, and set safety photocells to UL 325 standards. The gate closes and locks like a bank vault door, but it won’t pinch a child or a delivery driver.
Pedestrian Gate
Rear-yard pedestrian gates are common in Trophy Club where homes back up to the golf course or open space. They see foot traffic, garden carts, and occasionally a determined dog. We build these with the same powder-coated steel and ornamental scrollwork as the front gate so the HOA reviewer sees one consistent design language across the property.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Trophy Club
We install and service operators from FAAC, BFT, Linear, and Viking, plus LiftMaster, DoorKing, Elite, Ghost Controls, and Mighty Mule. That matters in Trophy Club because the community built out heavily in the 1990s and 2000s, and a lot of those original FAAC and Viking control boards are now failing at the same time. If your operator is beyond saving, we can often reuse the existing posts and photo eyes and swap in a new BFT or Linear operator, keeping the HOA-approved look intact. We keep common control boards, limit switches, and gear kits stocked locally so a repair or upgrade doesn’t sit idle waiting on freight.
Common Gate Installation Problems We See in Trophy Club Homes
- Hinge-post heave from the clay. The Blackland Prairie-adjacent soil under Trophy Club expands and contracts with the North Texas wet-dry cycle. Posts set shallow, or set without gravel backfill, shift within 12 to 18 months. The gate racks, the latch misses, and the operator strains. Our footings and heavier-gauge posts solve it at installation rather than patching it later.
- Golf-course rear gates wearing out early. Gates that open onto the course corridor get constant golf cart and turf equipment traffic. Hinge bearings and latch catches on those rear gates wear two or three times faster than a front driveway gate ever will. We spec heavy-duty ball-bearing hinges and reinforced strike plates on any gate facing the course.
- Deferred Winter Storm Uri damage. The February 2021 freeze damaged a significant number of automated gate control boards across the DFW area, and some Trophy Club systems still carry that deferred repair as intermittent failures. Failing capacitors show up now when summer heat pushes old electronics over the edge. If your gate opens half-way and stops, that’s a classic clue.
- HOA mismatch on replacement panels. We’ve seen gates that look fine from the street but would never pass a design review: the scrollwork is a slightly different pitch, the finish is flat black instead of the community’s powder-coated charcoal. In Trophy Club, exact matching isn’t optional, and we match from the start.
Pricing for Gate Installation in Trophy Club, TX
A single swing gate with a basic operator in Trophy Club starts around $4,200. A matching double swing gate runs $7,000 to $13,500. A sliding gate, which needs a steel track and possibly a cantilever setup, typically runs $5,800 to $11,000. Security gates with mag locks, intercoms, and underground power run $8,500 to $16,000 or more depending on the panel weight and access hardware. Pedestrian gates run $1,400 to $3,800.
Here’s a line-by-line look at what a typical double swing gate installation includes:
- Fabricated ornamental steel leaves, powder-coated to HOA spec: $4,200 to $7,000
- Heavy-gauge steel hinge posts, set in 48-inch footings: $900 to $1,600
- Operator (BFT, FAAC, or Linear) with safety photocells: $1,500 to $2,800
- Underground power run and conduit: $600 to $1,400
- HOA documentation and design review submittal: included
Every estimate is free, written, and settled before any work starts. You’ll know the exact number before we turn a wrench. Call (432) 237-4128 and we’ll schedule a walk-through at your Trophy Club property, measure the opening, check the soil at the post locations, and give you a price that holds.
We Also Serve Cities Near Trophy Club
Our crews run Trophy Club jobs every week, and we also cover Gate Installation in Trophy Club neighbors in Grapevine, Coppell, Carrollton, and Bedford. Same local knowledge, same 90-Day Done Right Promise, same live-answer phone line.
Serving Trophy Club, TX - Our Local Coverage Area
We’re based in the Trophy Club area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Trophy Club
Yes. Every subdivision and residential entrance gate in Trophy Club must pass HOA design review before installation. The review covers material, finish, and ornamental style, and it has to match the community’s established wrought-iron or powder-coated steel aesthetic exactly. A gate that would fly in Roanoke or Southlake can trigger a violation notice here. We prepare the submittal package, including drawings and finish samples, and hand it to you for filing. Call (432) 237-4128 and we’ll walk you through the process.
The two upgrades that stop most early wear on a golf-course rear gate are heavy-duty ball-bearing hinges and a reinforced latch catch, plus a slightly heavier panel gauge so minor bumps don’t leave visible dents. We also set the hinge post deeper because the soil near course irrigation lines stays wetter and moves more. If equipment is actually making contact with the gate, we’ll recommend a wider opening or a cantilever slide so there’s nothing to hit.
Yes. We take a rubbing or a photograph of the existing scrollwork, then fabricate the new leaf to match the pitch, bar size, and finish as closely as the metal allows. Powder coating is color-matched to the existing panel, accounting for any fading from the Texas sun. If the HOA’s original builder spec is still on file, we request that too, so the match is exact enough to pass design review. Call (432) 237-4128 for a free estimate on a matched second leaf.
If your operator is from the 1990s or 2000s, upgrading the whole unit is usually the better call. The control board failed because Uri’s ice and power surges pushed old capacitors past their limit. Selling you a replacement board for a 20-year-old FAAC or Viking operator means the gearbox or the limit switch will be next. A new BFT or Linear operator costs more up front, but it runs quieter, draws less current, and comes with a fresh manufacturer warranty. We’ll show you both numbers and let you choose, and the 90-Day Done Right Promise covers the labor either way.
We install solar operators where running utility power to the gate isn’t practical, but solar doesn’t change anything about how the posts behave in clay. The same deep footings and heavy-gauge posts are required, or the gate will rack and drag the panel against a solar operator’s battery capacity. Solar works fine on Trophy Club sites as long as the panel gets unobstructed southern exposure and the battery bank is sized for a week of cloudy weather. If utility power is available within a reasonable run, we’ll usually recommend that first.
Call Ironworks Gate Co. for Gate Installation in Trophy Club
If your gate is leaning, refusing to open, or waiting on an HOA submittal you don’t want to write, call (432) 237-4128. Victor Salinas or one of our Trophy Club crew leads will answer, ask you the right questions, and set a time that works. A free estimate, a written price, and a gate that’s hung and wired to stay right for decades. That’s the whole deal.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Trophy Club, TX.