Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Hurst
Gate posts in Hurst don’t fail the way they do in Bedford or Colleyville. The Blackland Prairie clay under this city swells when it rains and shrinks when it dries, and over decades that cycle works concrete footings right out of plumb. When a 1960s hinge post tilts four inches off vertical, the gate drags, the latch won’t catch, and the weld at the bottom of the hinge collar starts rusting through. That’s the call we make most often in Hurst’s 76053 and 76054 neighborhoods. If your driveway gate is leaning, dragging, or the hinge area is showing rust blooms at the weld, call us at (432) 237-4128. We’ll come out, assess the post and the steel, and give you a written price before any torch or grinder comes off the truck.
Why Ironworks Gate Co. Is Hurst’s Preferred Gate Parts & Welding Company
Ironworks Gate Co. has been turning wrenches and laying beads on steel for over 42 years, and our Gate Parts & Welding team knows what Hurst gates have been through. The homes here were mostly built between the late 1950s and the late 1970s, which means the driveway gates hanging on their original posts have survived 40 to 50 years of clay soil movement. That’s not a problem a generic handyman sees every day. It’s a problem we see every week. Our techs have rebuilt gates off Brown Trail where the concrete post was actually fine structurally but sitting four inches out of vertical. We know the difference between a post that needs replacing and a post that needs resetting. That’s the kind of judgment that saves a Hurst homeowner from paying for steel they don’t need.
Every job is protected by the 90-Day Done Right Promise. It’s written, not verbal. If something isn’t right, we come back and make it right. No arguing, no paperwork shuffle, no chasing a dispatcher. That’s how we’ve kept customers in Hurst and the surrounding Mid-Cities area calling us back for decades. And our standing offers apply to every Hurst job: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% discount for seniors and veterans.
A live person answers the phone at (432) 237-4128, 24 hours a day, 7 days a week. Not a voicemail box. Not a callback queue. If your gate is stuck open at 9pm and the latch side is dragging on the concrete, you’ll get a real human who can schedule a tech for Hurst.
Our Gate Parts & Welding Services in Hurst
We work on the parts that fail on Hurst gates. Not just the visible hardware, but the welds, the post footings, and the stress points that the clay soil attacks year after year. Every repair starts with an honest assessment of whether the steel is worth saving or whether new material is the smarter money.
Post Replacement
In Hurst, post replacement is the dominant repair call. The shrink-swell cycle of the Blackland Prairie clay routinely heaves and tilts gate posts several inches out of plumb, especially in the older subdivisions along Brown Trail and near the Precinct Line Road corridor. A post from the 1960s that looks solid at the surface can be sitting 3 to 5 inches off vertical at the top. We cut the old post at the base, dig out the degraded footing, and pour a new bell-bottom pier set 36 inches deep into stable clay. That deeper, flared footing resists future heave far better than the shallow cylindrical footings poured in the original construction. A new post in Hurst typically runs $450 to $900 installed, depending on the post size and whether it’s a hinge post or latch post. If the post carries an opener arm or keypad conduit, the job takes longer and costs a bit more.
Hinge Replacement
With decades of post lean and seasonal moisture against the steel, the hinge collar is usually the first failure point. We see rust-through right where the collar meets the post, especially on the original wrought iron gates that came with Hurst’s brick ranch homes. The hinge may still turn, but the weld is losing section thickness and the gate is starting to sag. We cut out the old hinge, grind the post clean, and weld on a heavy-duty replacement that matches the era’s ironwork. A single hinge replacement in Hurst usually runs $180 to $320. If we’re already on-site replacing two or three hinges on a double gate, the per-hinge cost drops.
Rail Repair
Gate rails crack at stress points after enough years of expansion and contraction. North Texas heat pushes steel frames through severe expansion cycles, and when the gate is also fighting post heave, the bottom rail takes the abuse. Hairline cracks grow into full breaks, and the gate panel starts to droop at the free end. We cut out the compromised section, sleeve or replace it with matching material, and weld it back flush so the panel hangs square. Rail repair in Hurst is typically $250 to $550 depending on rail length and whether the pickets need reinforcing at the same time.
Custom Welding
When the original gate has too much rust-through or the panel is too far gone for patch repair, we fabricate. We build replacement gate frames, reinforce existing panels, weld on latch plates, and fabricate hinge posts to match the ornamental style of the original ironwork. In Hurst, where many homes still have their original mid-century gates, custom welding often means matching old scrollwork and picket spacing so the repaired gate doesn’t look like a transplant. Custom fabrication, if we’re building a full replacement panel, starts around $800 and runs up from there based on height, width, and ornamentation. We quote the full price in writing before we start.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hurst
When a gate has automation on it, the operator has to work with the steel, not against it. We service and repair gate openers from BFT, Linear, Viking, and Ghost Controls, and we stock common replacement parts so Hurst repairs don’t wait on a distributor. If your Viking opener is straining against a gate that’s dragging from post heave, the fix isn’t the motor. It’s the hinge post. That’s why we address the full system: the post, the hinge, the rail, and the operator, so the new battery or control board doesn’t burn out six months later because the gate still drags. For Hurst homeowners with solar-powered operators on wide gates, the combination of clay-driven drag and actuator strain is the most common cause of premature battery failure. We fix the drag first, then the electrical. That order matters.
Common Gate Parts & Welding Problems We See in Hurst Homes
After four decades working gates across the Mid-Cities, the failure patterns in Hurst are consistent. Here’s what we encounter most often on service calls in the 76053 and 76054 zip codes.
- Hinge post heave and lean: Blackland clay moves. Posts poured shallow in the 1960s shift out of plumb every wet-dry cycle. The gate drags at the latch side, and the hardware starts failing from the constant strain.
- Rust-through at the hinge collar weld: Post lean opens micro-gaps at the weld seam. Rain and irrigation water sit against the steel. Over decades, the collar rusts through where it meets the post. The gate sags and the hinge binds.
- Bottom rail cracking from heat cycles: North Texas summers push steel through repeated expansion and contraction. Combined with post heave working the frame, the bottom rail is the first to crack at a weld joint.
- Solar operator battery drain on wide gates: When a gate drags because the hinge post is leaning, the actuator works harder on every cycle. Batteries that should last years die in months. We correct the drag first, then the electrical.
Why Hurst Soil Changes Which Parts Fail First
This is the part of the page most gate companies won’t tell you, because they’re not the ones doing the welding. Hurst sits squarely on the Blackland Prairie’s expansive clay formation. It’s the same soil that cracks foundations across the Mid-Cities, and it does the same thing to gate posts. The clay swells when wet, shrinks when dry, and the cycle never stops. A post footing poured 24 inches deep in 1970 has been flexed by this soil for fifty years. The post doesn’t break. It tilts. Slowly, season after season, the top leans further out of plumb until the gate won’t latch and the hinge welds are under constant shear load.
This is uniquely a Hurst problem. Bedford, Euless, and North Richland Hills sit on sandier fill in many areas. Their posts stay plumb. In Hurst, even a gate installed five to seven years ago can show a visible lean. That’s why our post replacement protocol for Hurst uses a bell-bottom pier at 36 inches, not the shallower cylindrical footing used elsewhere. And that’s why the first question our tech asks on a Hurst service call isn’t about the gate. It’s about the post.
Pricing for Gate Parts & Welding in Hurst, TX
Here’s what Hurst homeowners can expect to pay for common gate parts and welding work. These are honest ranges from recent jobs in the area. We quote every job in writing before we touch the gate, and the price we quote is the price you’ll pay. No surprises on the invoice.
| Service | Typical Hurst Price Range |
|---|---|
| Single hinge replacement | $180 - $320 |
| Post replacement (single post, new bell-bottom footing) | $450 - $900 |
| Rail repair (cracked or broken rail, welded) | $250 - $550 |
| Sag correction (reset posts, re-hang panels) | $350 - $700 |
| Custom fabrication (replacement panel, ornamental match) | $800 - $1,500+ |
Post replacement cost depends on post size, whether it’s a hinge post or latch post, and whether there’s conduit or an opener arm attached. Sag correction often costs more than a simple hinge swap because it involves re-hanging the panels, adjusting the arc, and sometimes resetting both posts. Every estimate is free. Call (432) 237-4128 and we’ll send a tech to measure and quote. If you have a written estimate from another company, bring it out. We’ll give you a free second opinion.
Remember the standing offers: $50 off any repair over $250, an $89 seasonal tune-up, and a 5% senior or veteran discount, always. The price is agreed before any work starts. The 90-Day Done Right Promise covers every Hurst job, in writing.
A Field Story From Brown Trail
Off Brown Trail, our techs rebuilt a double swing gate where the 1970s hinge post had heaved 4 inches out of plumb and the original wrought iron hinge collar was rusted through. The homeowner assumed the whole gate needed replacing. It didn’t. We bell-bottomed a new post footing 36 inches deep into stable clay to resist future heave, welded a fresh heavy-duty hinge post to match the era’s ornamental iron, and re-hung the panels with sag correction so the keypad entry and loop detector cleared the driveway arc. The gate had been original to that brick ranch since the Nixon administration. It swings now like it did the day it was hung.
We Also Serve Cities Near Hurst
Our gate parts and welding service covers Hurst and the surrounding Mid-Cities area, including Bedford, North Richland Hills, Colleyville, and Euless. If you’re just outside the Hurst city limits, call anyway. Dispatch is coordinated from the Dallas-Fort Worth office, and our crews run routes through Hurst daily. We’ll likely have a tech in your neighborhood this week. Learn more about our Gate Parts & Welding in Hurst coverage.
Serving Hurst, TX - Our Local Coverage Area
We’re based in the Hurst area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Hurst
Hurst is built on the Blackland Prairie’s expansive clay, and that clay shrinks and swells with every wet and dry season. The cycle works gate post footings loose over decades and tilts posts 3 to 5 inches out of vertical, even when the concrete itself is still sound. Neighboring cities like Colleyville and Euless sit on sandier fill, so their posts don’t move the same way. Our Hurst post replacements use a 36-inch bell-bottom footing to resist that movement. Call (432) 237-4128 for a free assessment of your post and footing condition.
In most cases, yes. We cut the old post at the base, demo the failed footing, pour a new bell-bottom pier, and weld a new hinge post to match the existing ornamental iron. The gate panel stays intact. This saves hundreds of dollars compared to a full gate replacement and preserves the original mid-century look of your Hurst home’s ironwork.
The battery is likely not the real problem. If the gate drags because a post has heaved or the hinges are binding, the actuator works harder on every cycle and drains the battery fast. We check the gate drag first, correct the post or hinge issue, then test the electrical. Fixing the drag usually fixes the battery. Call us at (432) 237-4128 and we’ll diagnose it on-site with a free estimate.
Yes. Residential automatic gates in Texas are covered by UL 325 safety standards, which require entrapment protection such as reverse loops, safety edges, or photo eyes. A gate that drags and stops mid-cycle is also a safety risk. We inspect the entrapment protection on every automatic gate we service in Hurst and will flag any missing safety devices in our assessment.
Often, yes. If the post steel is thick and the concrete is in good shape, we can reset the post in place by excavating around the footing, correcting the lean, and adding a deeper, flared collar of new concrete to stabilize it against future heave. We’ll tell you honestly if the steel is too far gone and a replacement is the better call. The assessment is free. Call (432) 237-4128 to schedule a look.
Call Ironworks Gate Co. for Hurst Gate Parts & Welding
If your Hurst gate is leaning, dragging, rusted at the hinge, or just not closing like it used to, call us. We’ll inspect the posts, the welds, and the hardware, and give you a written price before any work starts. No surprises on the bill. No upsell on parts you don’t need. Just honest steel work backed by a 90-Day Done Right Promise, in writing.
Call (432) 237-4128 for a free estimate. A live person answers, 24 hours a day, 7 days a week. We’ll send a background-checked, uniformed tech who works in your driveway the way he’d work in his own mother’s.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Hurst since the company’s founding in 1984.