Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Hurst
Gate access control in Hurst usually means one of three things: a keypad that quits accepting codes, a remote that stops tripping the opener, or an intercom so aged the microphone crackles louder than a caller’s voice. We fix all three, and we do it all over Hurst, from the brick ranches off Brown Trail to the newer cul-de-sacs west of Precinct Line Road. The problem here is rarely the operator itself. More often, it’s the shifting Blackland Prairie clay underneath the post, heaving it a few inches and binding the rack and pinion until the operator faults. You call (432) 237-4128, a live person answers, and we send a technician who already knows what that soil does to a gate.
Key Takeaways
- Most Hurst access control failures trace back to clay soil movement, not the keypad or opener.
- We stock parts for major brands and retrofit systems on gates from the 1960s and 1970s.
- Upfront price quoted and agreed before any work starts. Written 90-Day Done Right Promise on every job.
- A live person answers the phone around the clock. No voicemail. No answering service.
Why Ironworks Gate Co. Is Hurst’s Preferred Gate Access Control Company
Hurst homeowners tell us the same story: they had a general handyman out, the fix lasted a season, and now the gate faults every third cycle. We take a different approach. Every technician who rolls into Hurst carries welding experience and automation training on nine opener brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters when the keypad works fine but the post underneath has tilted 4 inches, which we see constantly in Hurst’s older subdivisions. Our Gate Access Control crew diagnoses the whole system, not just the symptom.
Victor Salinas founded this company in 1984. For over 42 years we’ve built a reputation on showing up when we say and standing behind the work in writing. That’s the 90-Day Done Right Promise. If anything about the job isn’t right within 90 days, we come back and fix it. No forms to file, no argument to win. Hurst customers get that same promise on every keypad, intercom, and remote installation.
Our techs know the streets here: the loops through the 76053 neighborhoods, the school-zone traffic down Brown Trail, the fenced yards of 76054 where dogs and kids dictate the gate schedule. When you call before noon, most Hurst calls get same-day service. When it’s an emergency, a live person answers at any hour and dispatches a technician who can reach most of Hurst within the hour.
Our Gate Access Control Services in Hurst
Keypad Entry
A keypad that won’t accept a code in Hurst is often a symptom of a larger problem. When clay movement tilts the post, the gate’s travel arc shifts and the operator’s obstruction sensor trips mid-cycle. You punch the code, the gate starts, the gate stops, and you punch the code again. We check the keypad, yes, but we also check plumb, rack alignment, and limit settings. A typical keypad replacement in Hurst runs $150-$320, but if the post is the culprit, fixing the pad alone won’t stop the faulting. We’ll tell you that before we quote anything.
Remote Control
We program and service handheld remotes, wireless keypads, and vehicle-embedded transmitters for every brand we carry. Hurst homeowners with 1970s-era gates often have legacy receivers that won’t pair with new remotes, so we retrofit a modern receiver onto the old operator and hand you a remote that works from the minivan, not just the driveway. Remote replacement and programming in Hurst typically costs $75-$180 per remote, plus the visit. If you have an older operator, we’ll recommend the right receiver at the free estimate.
Phone Entry
Phone entry systems let you buzz a visitor through from anywhere using your landline or cell. In Hurst, where retirees often want to stay inside rather than walk to the gate in August heat, these systems earn their keep. We install and program phone entry on existing operators, and we pair it with a modern keypad or video intercom where it makes sense. A phone entry retrofit in Hurst generally runs $450-$900 depending on the operator and wiring, and we’ll quote the full number before we order parts.
Card Reader
Card readers suit Hurst properties with multiple regular users: households with adult children, caregivers, or grounds crews. We install standalone readers and readers integrated with existing operator control boards, the same ones used in Hurst’s gated subdivisions along the Precinct Line corridor. Expect to pay $300-$700 for a card reader in Hurst, installed and programmed. We’ll also run the credential registration so every card works before we leave the driveway.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hurst
We’re factory-trained on nine automation brands, but the ones we repair most often in Hurst are FAAC, Linear, and BFT. The FAAC operators are common on heavier iron gates from the 1970s that still work. Linear drives show up on many mid-century ranch house gates. BFT runs through a good number of Hurst’s newer systems. We keep common parts for these brands on the truck when we dispatch to Hurst, which lets us finish most jobs in one visit rather than ordering a board and driving back a week later. That’s part of the reason we can say: most Hurst access control jobs are done in a single visit.
Common Gate Access Control Problems We See in Hurst Homes
- Clay heave tilts the post until the rack and pinion binds. The operator’s obstruction sensor trips on every cycle, so the gate starts and stops like a nervous driver. The keypad gets blamed first, but the post usually moved 3-5 inches off vertical. Fixing this in Hurst means resetting the post with a bell-bottom footing, not just clearing the fault.
- Rust-through at the hinge collar on 40-year-old iron gates. Hurst’s mid-century gates have spent five decades in wet-dry clay cycles. The hinge collar rots, the panel sags, and the safety photocell falls out of alignment. The gate reverses for no reason. The remote hasn’t failed; the gate geometry has.
- Loop detector miss-detections after late-summer rain. When dry heat cracks the clay and a heavy rain follows, the soil shifts fastest. We get calls from Hurst homeowners whose gates stay open or closed unpredictably because the loop detector under the driveway can’t read the car consistently through the movement. Recalibrating the loop and re-seating the post fixes it.
- Legacy operators with obsolete control boards. Many Hurst gates from the 1960s and 1970s run on boards no one makes anymore. When the board dies, you can retrofit a new access system onto the existing gate and motor, or you can throw good money after a dying machine. We’ll show you both numbers and let you decide.
Pricing for Gate Access Control in Hurst, TX
Here are the ranges we quote in Hurst right now. A keypad replacement runs $150-$320. A remote with programming costs $75-$180. Phone entry runs $450-$900 installed. A card reader runs $300-$700. A full video intercom system with phone access starts around $900 and can run to $2,200 depending on the gate and wiring. Post re-setting due to clay movement, which we do more in Hurst than anywhere else in Tarrant County, adds $380-$950 depending on footing depth and concrete work. Every quote is given in writing before we turn a bolt, and the price we quote is the price on the invoice. Estimates are free. Call (432) 237-4128 and we’ll come measure the gate and put the number in your hand.
We Also Serve Cities Near Hurst
Our crews are in Hurst daily, and we run the same trucks, the same techs, and the same 90-Day Done Right Promise into Bedford, North Richland Hills, Colleyville, and Euless. If you live just over the city line, the response time is about the same and the service doesn’t change. Dispatch is coordinated from our Dallas-Fort Worth office, so scheduling is simple no matter which side of the county line you’re on.
Serving Hurst, TX - Our Local Coverage Area
We’re based in the Hurst area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Hurst
The keypad was likely never the problem. In Hurst, the clay under your post expands and contracts through every wet-dry cycle, and over 5-7 years the post can drift 3-5 inches out of plumb. That tilts the gate’s travel arc and binds the rack and pinion, which trips the operator’s safety sensor mid-cycle. The operator reverses because it thinks it hit something, not because the code failed. Replacing the keypad on a leaning post is like changing the battery in a car with a bent axle. We reset the post with a proper-depth footing for Blackland Prairie clay, then re-hang the operator and recalibrate. Call (432) 237-4128 to have someone check plumb before you buy another keypad.
Most of the time, yes, you can retrofit. Those mid-century Hurst gates are heavy, well-welded iron with plenty of life left in the panel. What usually isn’t worth saving is the 1970s operator and the wiring. We mount a modern video intercom, run new low-voltage line, pair it with a current operator that matches the gate’s weight, and you keep the original iron. If the hinge collar has rusted through or the post is cracked, replacement becomes the cheaper answer, and we’ll tell you straight. A retrofit with video intercom in Hurst runs $900-$2,200 depending on gate weight and wire run.
No, that one’s not the clay. Older receivers in Hurst’s mid-century houses often use fixed-code radio, and those codes can overlap between two houses close together. The fix is a rolling-code receiver, which changes the signal every time you press the button. It’s a quick retrofit onto your existing operator, usually under $220, and it stops your remote from waking up the neighbor’s gate. We can also program a receiver that only responds to your remotes and keypads.
The loop detector reads your car through a wire buried in the driveway. In Hurst, a dry July cracks the clay, then a heavy August rain soaks it and the soil swells unevenly. The wire shifts, the sensitivity drifts, and the detector starts missing cars or reading phantom ones. Sometimes the gate stays open half the day; other times it won’t open at all. We recalibrate the sensitivity, check the wire for breaks, and if the post has moved, we reset it so the loop stays reliable through the next wet-dry cycle. Call (432) 237-4128 for a free estimate on a loop recalibration in Hurst.
Yes, and any honest gate company will tell you the same. Photocells from the 1970s were basic, and they’ve spent 50 years in Texas heat and clay movement. Modern code requires monitored safety edges and photocells designed to stop and reverse the gate without fail. When we add phone entry or any access control to a Hurst gate, we replace the old photocells with new ones as part of the job. It’s a small line item, usually $80-$140 per pair, and it’s not negotiable. We won’t upgrade your access system while leaving a 50-year-old safety device on the gate.
Call Ironworks Gate Co. at (432) 237-4128 for gate access control in Hurst. A live person answers any time, day or night. Ask about the free estimate, the $50-off repair offer over $250, or the 5% senior and veteran discount. Off Precinct Line Road in 76053, we reset a 1970s wrought iron swing gate with a DoorKing operator that kept faulting because the concrete post had leaned 4 inches and bound the rack and pinion. We put in a bell-bottom footing at proper depth for Hurst clay, re-hung the operator, recalibrated the loop detector and safety photocells, and the keypad worked first try. That’s the kind of repair this soil demands, and we do it every week in Hurst.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Hurst, TX and surrounding communities with gate access control, gate repair, and installation.