Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Bedford, TX
If your gate groans, drags, or refuses to close, the quickest fix is a phone call to (432) 237-4128. Gate repair in Bedford usually runs between $180 and $850, depending on whether we’re resetting a post, replacing a hinge, or rebuilding an opener. Most repairs are completed on the first visit. That’s not a promise we make lightly. It’s simply what happens when a technician is trained on nine automation brands and has spent decades wrestling with North Texas clay, heat, and aging cedar.
At Ironworks Gate Co., we specialize in driveway and estate gate repair. That includes everything from a sagging swing gate on Harwood Road to a slide gate operator that’s forgotten its limits near Central Park. Gate Repair in Bedford is our focus. A live person answers our line 24 hours a day, seven days a week. If your gate is stuck open at midnight, you will speak with someone who knows what a Viking control board sounds like when it fails.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Bedford Homeowners Choose Ironworks Gate Co.
Bedford homeowners tend to be particular. They’ve lived through the era of corner-cutting contractors, and they remember every one. We meet that skepticism with a written guarantee: the 90-Day Done Right Promise. If something is not right, we come back and make it right. No argument, no paperwork, no invoice. Every job, from a simple hinge swap in the neighborhoods off Cheek-Sparger Road to a full gate installation in Shady Lake, carries that same commitment.
The crew arrives in uniform and has passed a background check. Our lead on Bedford service, Victor Salinas, sets the standard: Krafted right. Every time. Your home first. Standing behind it. It’s not a slogan. It’s a checklist.
We’re called out regularly to repair gates that another company or a handyman touched the year before. Same story every time: the hinge was adjusted but the post was already out of plumb. The opener was replaced but the root pushing on the footing was never cut. Our work is built to survive the next clay swell and the next hundred-degree week, not just the next ten days.
Bedford residents in neighborhoods like Shady Lake, Harwood Terrace, and the Oak Creek area call us because we know what’s behind the gate: a family, a dog, maybe a grandkid on a bike. We treat that gate accordingly.
Gate Repair Services We Offer in Bedford
Gate Repair
We rebuild sagging gates, replace hinges, repair broken welds, and brace rotted posts. In Bedford, the most common call is a cedar gate pulling away from its post because decades of wet-dry clay movement have thrown the post out of line. Learn more about our gate repair in Bedford.
Gate Installation
We install swing and slide gates sized for Bedford’s architectural mix: brick ranch homes, two-story tract houses, and the occasional estate property. Every installation starts with a free measure and a written quote, so you know the full cost before any work begins. Learn more about our gate installation in Bedford.
Gate Motor & Opener
We service and install automation for nine brands, including FAAC, BFT, and Viking. A dead opener doesn’t always mean a dead motor. Often the limit switch is out, or a safety edge is misaligned. We diagnose what’s actually failing before recommending a repair. Learn more about our gate motor and opener services in Bedford.
Gate Access Control
Keypads, intercoms, telephone entry, and vehicle detection. We wire systems that handle Texas heat without phantom triggers and false calls. If your keypad stops responding after a rainstorm, the wiring and ground are the first things we check.
Gate Parts & Welding
Sometimes the gate is solid but the welds are cracked. We do on-site stick and MIG welding for steel gates, replace cast-aluminum hinge brackets, and fabricate parts that are no longer in production. Whatever is original on your 1983 setup, we can usually match it or improve on it.
Neighborhoods We Serve in Bedford
We cover all of Bedford, including the established neighborhoods where original gates are now entering their fifth decade. Our typical response time across the city is same day or next morning for non-emergency repairs, and faster when a gate is down and a vehicle is stuck inside or out.
- Shady Lake
- Harwood Terrace
- Oak Creek
- The Woodlands
- Bedford Downs
Why Bedford’s Climate & Housing Affect Gate Repair
Bedford’s housing stock is unique in the Mid-Cities. Most homes were built in a tight window roughly between 1975 and 1993, which means thousands of cedar board-on-board privacy gates are now 40 to 50 years old. They were never engineered for that kind of life. The original 4×4 cedar posts, set directly into Blackland Prairie clay with a bag or two of Quikrete, have been heaving and tilting through forty cycles of drought and rain. The result is the same on nearly every street: a gate that closes fine in March and drags by July.
Then there are the roots. In older Bedford neighborhoods, mature post oaks and elms have sent surface roots sideways into fence lines. Inch by inch, those roots move gate posts out of square. A technician who only adjusts the hinge is back next year. A lasting repair means excavating the post, cutting the root, and resetting the footing. That’s the standard work we do across Bedford, and it’s the reason our 90-Day Done Right Promise exists. You can learn more about what makes Bedford’s gates fail differently in our home service overview and call us for a straight answer on your specific setup.
Pricing for Gate Repair in Bedford
Honest numbers up front, every time. The price is quoted and agreed before any work begins. Here’s the range for most Bedford repairs:
- Hinge or latch replacement: $180-$340
- Post reset (including concrete and root cutting): $425-$850
- Welding repair on a steel gate: $250-$550
- Opener or control board replacement: $390-$1,100 (varies by brand; FAAC and BFT boards run higher)
- Complete swing gate replacement (cedar): $1,200-$4,800, depending on length and hardware
We also offer $50 off any repair over $250, a free second opinion on any written estimate you’ve received, and an $89 seasonal tune-up that catches small problems before they become midnight emergencies. Seniors and veterans receive a 5% discount, every time, on everything.
Service Area - Cities Near Bedford
We serve Bedford and the surrounding Mid-Cities communities. If you’re in Colleyville, Hurst, Euless, or North Richland Hills, the same crew, the same guarantee, and the same live phone line apply.
Serving Bedford, TX - Our Local Coverage Area
We’re based in the Bedford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Bedford
Most repairs land between $180 and $850. A simple hinge swap starts around $180, a full post reset with concrete runs $425 to $850, and opener repairs vary by brand but typically fall between $390 and $1,100. Call (432) 237-4128 for an exact quote. Estimates are free and there’s no obligation.
Usually yes, if the post is still solid. We first check the post’s footing under the ground. In Bedford, the clay heaving is often the actual problem, not the gate. If the post is solid, we re-hang and brace the gate. If the post is rotted below grade, we reset it in new concrete. You’ll know the price before we touch a bolt.
We do. They’re common in Bedford. If the opener still runs but stops mid-travel, the limit switch is the usual culprit. If the motor hums but won’t start, it often needs a new capacitor. We stock parts for Linear, Viking, and other older systems, and can source what’s become scarce. We repair what’s repairable before recommending replacement.
For true emergencies where a gate is stuck open or a vehicle can’t get out, we dispatch as quickly as possible, often within hours. A live person answers at (432) 237-4128. No answering service, no voicemail tree. Describe what’s happening and we’ll tell you honestly when we can be there.
If anything we repaired or installed fails within 90 days due to our workmanship or parts we supplied, we come back and fix it. No charge. No paperwork. No back-and-forth. That covers every job, every time, in every Bedford neighborhood. Call (432) 237-4128 and we’ll make it right.
Contact Ironworks Gate Co. in Bedford
If your gate is failing, acting up, or simply not the gate it used to be, call us at (432) 237-4128. You’ll speak to a person, not a phone tree. We’ll talk through what’s happening, give you a straight answer on likely cost, and schedule a time that works. Every estimate is free. Every price is quoted and agreed before work starts. And every job ends with the same guarantee: done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Bedford, TX with gate repair done right since 1984.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Bedford Customers Say
"The photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that a sprinkler head was spraying it every morning, which is why it kept happening."
- Jamal Dawson"The gate works properly now and the price was fair. It did take two visits, because the operator we have is old and the part had to be ordered. They did not charge for the second trip."
- Carrie Mercer"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one on the truck, and we were moving cars again inside an hour."
- Chris Gallagher