Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Keller
Gate access control in Keller means keypads, intercoms, phone entry, and card readers that have to work every single time, because in this city they often guard shared driveways and private streets. A failed keypad off Bear Creek Parkway can lock out three or four households at once. We get that, and we respond to Keller calls fast, with a live person on the phone 24 hours a day, 7 days a week. If your gate access system is acting up in the 76244 or 76248 zip, call (432) 237-4128 and talk to someone who knows Keller’s gates.
Why Ironworks Gate Co. Is Keller’s Preferred Gate Access Control Company
We’ve been working on ornamental iron gates and automated operators for over 42 years, and the work we do in Keller is shaped by what Keller actually is: an HOA-dense, master-planned suburb where gates aren’t an afterthought, they’re part of the streetscape. Homeowners in Hidden Lakes, Marshall Ridge, and the older lots along Rufe Snow Drive call us because the first question they ask isn’t “how cheap can you do it,” it’s “will you fix the root cause and stand behind it.” Our written 90-Day Done Right Promise answers that question before they even ask it. If it’s not right, we come back and make it right. No paperwork, no arguing.
Our technicians are background-checked, uniformed, and trained on nine gate-automation brands including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. When a Keller homeowner calls about a gate that won’t close, the tech who shows up has likely seen that exact failure on that exact operator in this exact soil. That matters more than most people realize, and we’ll explain why below. A live person answers every call at (432) 237-4128, day or night. Not a voicemail tree, not an answering service.
Our Gate Access Control Services in Keller
We handle the full scope of Gate Access Control work, from a single keypad replacement to a complete multi-household system on a shared private street. Here’s what that looks like in Keller.
Keypad Entry
Keller’s keypads take a beating from direct Texas sun and seasonal soil movement. A keypad mounted on a post that shifts with the clay can develop loose connections inside the housing, which leads to intermittent failures: the code works fine at noon, then rejects it at 7 a.m. after a cool night. We replace the keypad, re-set the post if needed, and run new wiring where corrosion has set in. Typical keypad entry work in Keller runs $180 to $420, including parts and labor.
Video Intercom
Adding a video intercom to an existing ornamental iron gate is one of the most common requests we get from Keller homeowners, particularly in the 76248 neighborhoods where gates were installed 15 to 25 years ago. HOA rules usually require the intercom to match the existing ironwork, which limits retrofit options. We’ve done this enough times in Keller to know which mounting brackets and conduit runs pass HOA review without a fight. A basic video intercom install starts around $950 and a full system with multiple indoor monitors typically runs $1,400 to $2,600.
Phone Entry
Phone entry systems let a visitor call your cell phone from the gate keypad, and you buzz them in with a button press. In Keller, these systems are popular on shared driveway gates where multiple households need access without sharing a master code. The failure mode we see most is the phone line or cellular module losing signal in the brick and stone entry columns common around Keller’s newer subdivisions. We hardwire where practical or switch the unit to a more reliable cellular carrier. Phone entry installation in Keller runs $700 to $1,300 for a typical single-gate setup.
Card Reader
Card readers work, but they need clean power and a stable gate. Keller’s reactive clay shifts posts over time, which can pull the reader’s cable taut at the hinge point and cause intermittent read failures. We’ll often find a card reader that works perfectly on the bench and fails on the gate because of a wiring issue at the moving joint. Fixing that properly, not just re-terminating the cable, is the difference between a repair that lasts and one that fails again next season. Card reader work in Keller typically runs $220 to $480 for repair, or $800 to $1,500 for a new install with programming.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Keller
We service and install Gate Access Control in Keller equipment from every major brand you’re likely to have on your property. We’re factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, which means we diagnose and fix correctly on the first visit. For Keller customers specifically, we keep a stocked van of common Viking and Linear control boards, Ghost Controls receiver units, and keypad components so a repair doesn’t stall waiting on a part shipped from out of state. Most jobs are completed in a single visit.
Common Gate Access Control Problems We See in Keller Homes
- Keypads that fail after rain. Keller’s clay soil holds moisture up against post footings, and when that moisture wicks into the keypad’s wiring junction, you get intermittent failures. The code works when the soil is dry and fails after a wet spell. The fix is sealing the junction and often replacing the loop detector wire.
- Safety photocells that keep tripping. As the hinge post leans from soil heave, the photo eye on the gate moves out of alignment with the eye on the post. The gate reverses or refuses to close, and the homeowner assumes the operator is dying. Most times it’s the post, not the motor.
- Shared driveway systems that lock out multiple homes. One keypad or controller often serves two, three, or four households in Keller’s HOA subdivisions. When that single unit fails, every household loses access simultaneously. These are the calls we treat as true emergencies.
- Swing gates binding in tight setbacks. Many Keller lots were platted with short side yards, so swing gates run close to fence lines and brick walls. When the post leans even a few degrees, the gate edge catches on the fence, the obstruction sensor trips, and remote access goes dead. We see this constantly on properties built during the late 1990s and early 2000s.
Pricing for Gate Access Control in Keller, TX
Here are straight numbers for Keller’s market. Keypad replacement runs $180 to $420. A new phone entry system runs $700 to $1,300. Video intercom installation runs $950 to $2,600 depending on the number of monitors. Card reader repair runs $220 to $480. A full access control system for a shared driveway gate, including keypad, two remote controls, and a phone entry module, typically lands between $1,800 and $3,200. The price you’re quoted is the price you pay, settled before a single bolt is turned. No surprises on the bill. We also honor $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% discount for seniors and veterans. Call (432) 237-4128 for a free estimate.
What Makes Keller’s Gate Access Systems Different
Keller’s housing stock was almost entirely built between 1993 and 2015, inside HOA-governed subdivisions with larger lots and upscale finishes. That building boom made automated driveway gates and neighborhood entry systems standard rather than optional. Here’s what that means today: those original operators, control boards, and hinge posts are now 15 to 25 years old, and they’re failing all at once. Keller is sitting on a wave of gate access repair demand that older, mixed-stock cities like Fort Worth simply don’t have. The work here skews toward replacement of aging equipment on gates that were designed and installed before smart access was even a phrase.
On top of that, Keller sits on Tarrant County’s reactive black clay. Drought summers shrink the soil and drop gate posts. Wet winters heave them back up. Over a decade of cycling, swing gate hinge posts develop a characteristic outward lean that pulls the gate out of plumb and puts lateral stress on the operator arm and the access control wiring. A keypad that worked flawlessly for eight years suddenly starts rejecting codes, not because the keypad failed, but because the post it’s mounted on shifted two inches and pinched the conduit. We’ve re-set more Keller gate posts than we can count, and in most cases the homeowner had already paid for an operator replacement that never addressed the actual problem. Before you write another check, let us look at the post.
On a shared driveway off Bear Creek Parkway in Keller’s 76248 zip, our crew was called for a Viking keypad entry that kept rejecting valid codes. We traced the fault to a corroded loop detector connection at the swing gate’s post footing. The clay soil had shifted the hinge post just enough to pinch the conduit, shorting the wire. After re-setting the post and replacing the detector loop, the gate operator cycled cleanly and both households’ codes worked again. That’s the kind of fix that only comes from knowing Keller’s soil, Keller’s lot layouts, and Keller’s gate hardware.
HOAs and Gate Access Systems in Keller
One thing we deal with in Keller more than almost anywhere else in the metro: HOA requirements that homeowner-installed gates match the community’s ornamental iron spec. That constraint changes the conversation. You can’t just swap in any off-the-shelf gate or any generic keypad housing. The HOA’s architectural committee has to approve the alteration, and in communities like Marshall Ridge and Hidden Lakes, they expect the gate and its access hardware to blend with existing ironwork. We’re familiar with the common specs in Keller’s major subdivisions, and we can recommend equipment that will pass review without a second round of paperwork. If you’re adding a video intercom or keypad to an existing gate, we’ll tell you up front what’s likely to be approved and what won’t.
We Also Serve Cities Near Keller
Our crews serve Keller and the surrounding communities, including North Richland Hills, Southlake, Colleyville, and Hurst. If you’re in one of those cities and your gate access system has failed, the same team that handles Keller’s shared driveway gates will handle yours. Call (432) 237-4128 and ask for Victor or any member of our team.
Serving Keller, TX - Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Keller
After rain, Keller’s clay soil swells and shifts your gate post just enough to pinch the keypad’s wiring conduit or expose a corroded connection at the post footing. The moisture causes a short or an intermittent open in the circuit, so the keypad works when things dry out and fails when the ground is wet. The permanent fix is to re-set the post if it has moved, replace the damaged wire, and seal the junction against moisture. Call (432) 237-4128 and we’ll diagnose it the same day.
Yes. The key is choosing a mounting method and conduit run that matches the existing ironwork and passes your HOA’s architectural review. We’ve installed dozens of video intercoms on ornamental gates in Keller’s 76244 and 76248 subdivisions, and we know which brackets and finishes are typically approved without pushback. We’ll also handle the power run and safety edges so the install is code-compliant. Installation starts around $950.
Usually it’s the safety photocell misaligned by a leaning post, not the operator. Keller’s clay shifts hinge posts over time, which points the photo eyes slightly away from each other, and the gate loses its detection field. The operator then closes on a car because the obstruction signal never reaches it. We check the post alignment, the photocell alignment, and the loop detector to find out which one has failed, and we fix it without replacing an operator that’s still fine. Most of these jobs take one visit.
A swing gate arcs inward or outward and needs clearance equal to the gate width, which is scarce on Keller lots with tight side yards. A slide gate moves along the fence line and uses no yard space for its travel, which is why many Keller homeowners with short setbacks convert to slide operators when their original swing gate starts binding. Slide conversion typically runs $2,800 to $5,200 in Keller depending on gate size and track construction. We’ll measure your setback and give you a written price before any work starts.
First, confirm the outage is over and the breaker is on. Most LiftMaster operators will resume normal operation on their own after power returns, but if yours is flashing an error code or the access keypad is dead, the system likely lost its memory or the control board took a surge. The safe approach is to press the reset button on the operator once, wait 30 seconds, and test. If codes, remotes, or intercom functions are still missing, don’t keep cycling the unit: a trained technician can re-learn the accessories and check for surge damage. Call (432) 237-4128 and we’ll walk you through it on the phone before sending a truck.
Contact Ironworks Gate Co. in Keller
If your gate access system is down in Keller, or if you’re planning to upgrade to a video intercom, phone entry, or keypad entry system, call (432) 237-4128. A live person answers 24 hours a day, 7 days a week. We’ll quote a fair price, show up when we say, and back the work with our written 90-Day Done Right Promise. Victor Salinas and the Ironworks team have been doing this work for over 42 years, and we plan to be doing it in Keller for another forty.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Keller and the surrounding Tarrant County communities with gate access control, repair, and installation.