Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.





Fast, Reliable Gate Access Control Across North Richland Hills
Gate access control in North Richland Hills usually comes down to a handful of jobs: replacing a worn keypad, adding Smart Access to an older operator, or repairing a loop detector that quit recognizing codes. Most of the access systems we service in the 76180 and 76182 ZIP codes fall into one of those three buckets. Ironworks Gate Co. has worked on enough gates in North Richland Hills to know what your HOA will ask about before we even knock on the door. If you need something diagnosed or upgraded, call (432) 237-4128 and a live person will answer, day or night.
Why Ironworks Gate Co. Is North Richland Hills’s Preferred Gate Access Control Company
Homeowners in North Richland Hills tend to keep their houses for decades, and the gates they installed in the 1980s and 1990s are still out there working, mostly. We get called to Smithfield Estates, the neighborhoods off Rufe Snow Drive, and the subdivisions along Davis Boulevard for the same recurring issues: keypads that work intermittently, remote controls that stopped syncing, and gate panels that drift because the post moved. Our techs know the gate inventory in this city. We have seen the cedar privacy gates in 76180 that are thirty and forty years old, and the ornamental iron driveway gates in the 76182 master-planned communities that the HOA will only let you repaint in one specific finish.
Every technician who rolls a truck to North Richland Hills is background-checked and uniformed, and every job is protected by our 90-Day Done Right Promise. That promise is written. If something is not right, we come back and make it right. No paperwork, no arguing. Victor Salinas built this company on that standard, and it holds for the four-hundredth job the same as the first.
Our Gate Access Control Services in North Richland Hills
We work on the access side of residential gates, not commercial lots or industrial parks. If a homeowner in North Richland Hills has one gate, two gates, or a driveway plus a pool barrier, that is our scope. Here are the services we handle most often in this city.
Keypad Entry
Keypads are the workhorse of gate access control in North Richland Hills, and this climate is hard on them. One hundred degree summers fade the membrane face and bake the internal wiring until codes register only sometimes. We replace worn keypads with weather-sealed units built for North Texas exposure, and we wire them properly to the operator so they do not eat through batteries in three months. Most keypad swaps in North Richland Hills are a single-visit job with the price settled before we start.

Remote Control
Older remotes lose signal strength as the operator board ages, and homeowners in North Richland Hills sometimes live with a remote that works from twenty feet away but not from the street. That is usually a receiver sensitivity issue or antenna placement, not the remote itself. We test the whole path before selling you a new remote. If the operator needs a fresher receiver, we do that instead and keep your existing remotes paired.

Phone Entry
Phone entry systems let you buzz in family members or delivery drivers without walking out to the gate. In North Richland Hills, where driveways are long and summer heat is serious, that matters. We install and service cellular-based phone entry units that work off your existing cell signal, no landline required. These systems need a protected enclosure and solid power, both of which we handle.

Card Reader
Card readers are less common on single-family gates but still show up on shared driveway entrances in a few North Richland Hills communities. We replace worn readers, re-flash credentials, and tie them into the existing operator wiring so the gate opens on the first tap, not the sixth.
Smart Access, which covers app-based control and camera integration, rounds out the list. In North Richland Hills, Smart Access upgrade requests usually come from homeowners who want to open the gate from their phone without carrying a remote. We install those systems on existing operators whenever the board supports it, which is most of the time on LiftMaster, FAAC, and BFT units.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in North Richland Hills
We carry or stock parts for the brands homeowners in North Richland Hills actually have on their gates. That includes FAAC, BFT, Linear, Viking, and a handful of others. It means a keypad swap or loop detector repair usually happens the same day, because the part is already on the truck. We have the wiring diagrams and the service experience for each brand, so we do not stand in your driveway guessing. If you have an older Viking operator or a BFT slide gate, our techs know the failure points before they open the panel.
Common Gate Access Control Problems We See in North Richland Hills Homes
North Richland Hills has its own set of gate access failures, and they repeat across the city’s housing stock. Here is what we see most:
- Clay soil heave breaks the loop detector wire under the driveway. The shrink-swell clay in this part of the Fort Worth Prairie moves enough to snap underground wires. When the loop detector fails, the gate ignores valid keypad codes and will not auto-close. This is not a keypad problem; it is a wire problem under the concrete.
- HOA-approved ornamental iron gates rust at the hinge post weld. The panel sags, the safety photocell beam misaligns, and the gate reverses or refuses to close. In the 76182 subdivisions with strict aesthetic rules, the repair has to match the original finish, so we match the coating before we weld.
- Freeze-thaw cycles snap the rack on slide gates. North Richland Hills gets hard freezes often enough that a steel rack gear will crack at the weld points over time. The operator spins, but the gate does not move. Homeowners call thinking the motor is dead. It is usually the rack.
- Sun-faded keypads on wood privacy gates. The 76180 zone is full of 1980s-era cedar gates with original hardware. The keypad face is often bleached to the point where the numbers are unreadable, and the internal contacts are corroded. We replace them with sealed units and re-route the wire away from the hinge side where it gets pinched.
Pricing for Gate Access Control in North Richland Hills, TX
A keypad entry replacement in North Richland Hills typically runs $325 to $575 depending on brand and whether the existing wire can be reused. Adding Smart Access to an existing operator runs $475 to $800. A remote control replacement is the most affordable job at $85 to $160 per remote, programmed and tested on site. Loop detector repair, which involves locating and repairing the broken wire under the driveway, lands between $400 and $750 depending on the length of the run and whether trenching is required. Every quote is written, agreed to before we turn a bolt, and protected by our 90-Day Done Right Promise. Call (432) 237-4128 for a free estimate on any of these jobs, and ask about the $50 off any repair over $250 or the senior and veteran 5% discount.
We Also Serve Cities Near North Richland Hills
Our Gate Access Control crews work throughout the mid-cities area. We are regularly on the road to Hurst, Colleyville, Bedford, and Keller, and we schedule those routes daily. If you are a few minutes outside North Richland Hills, the same techs and the same pricing apply. See our Gate Access Control in North Richland Hills page for the full local service detail.
Serving North Richland Hills, TX - Our Local Coverage Area
We’re based in the North Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in North Richland Hills
Most North Richland Hills HOAs will approve a keypad addition, but the approval usually comes with conditions on finish, mounting height, and sometimes brand. In the 76182 master-planned communities, the architectural review committee often wants the keypad housing to match the gate’s existing color and hardware finish. We can provide the spec sheet and a photo mockup for your board packet. The smart move is to get written approval before installation, and we can help you draft that request. Call (432) 237-4128 if you want us to walk the gate with you before you file anything.
Rain-related keypad failures in the 76180 area are almost always a wiring issue, not a keypad issue. Water is getting into a splice, a conduit fitting, or the keypad housing itself, and the moisture causes a short that drops the signal. The fix is usually re-sealing the splice, replacing the conduit seal, or moving the keypad to a drier mounting point. We track these repairs by neighborhood in North Richland Hills, and the rain-failure pattern in the older 76180 subdivisions is consistent with degraded wire insulation from the 1980s. We fix it properly, not just dry it out and hope. Call for a free estimate.
Yes, in most cases the keypad can stay. We only replace the keypad if it has failed or if the new operator uses a protocol the old keypad cannot speak. What matters more on slide gates in North Richland Hills is the loop detector and the rack gear. If the rack is cracked from freeze-thaw cycles, a new operator will not fix the gate. We assess the whole system before recommending anything, and the price is settled before work starts. Call (432) 237-4128 to schedule an estimate.
The keypad itself is not the code issue; the gate’s ability to close and latch on its own is the code issue. If the faded keypad still works and the gate self-closes and self-latches, you are compliant. But if the keypad’s internal contacts are corroded and the gate does not reliably release or close, you have a pool barrier problem, and Texas law is specific about that. North Richland Hills has a high concentration of backyard pools in the established subdivisions, and we treat pool gate access as a safety repair, not a convenience call. We can inspect it and tell you what actually needs attention.
Start with the meeting calendar. North Richland Hills boards typically hear architectural requests once a month, and some only review them quarterly. Get your request on the agenda first, then schedule the work after the approval is in writing. We can work around that timeline, and we can coordinate with your property manager on the outage window so residents are never locked out during a shared entry upgrade. We have done exactly that in Smithfield Estates, where the HOA had to sign off on a keypad finish before we swapped an old DoorKing unit for a LiftMaster Smart Access system.
Call Ironworks Gate Co. for Gate Access Control in North Richland Hills
When you call (432) 237-4128, a live person answers. We will talk through what your gate is doing, what your HOA requires, and what it will cost. The quote is free, the price is settled before we start, and the work is guaranteed in writing for 90 days. If you are in North Richland Hills and your gate access is acting up, do not wait for it to fail completely. Call us today.
Written by Victor Salinas, Owner at Ironworks Gate Co.
Before
After
Before
After
Before
After