Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Irving
Gate access control in Irving means keypads, phone entry, card readers, and intercoms that work every time, in every season. We handle the full system for homeowners and HOAs across Irving, with a live person answering the phone day and night at (432) 237-4128. Most jobs are completed in a single visit, and the price is settled upfront before we turn a single bolt. Irving’s planned communities, especially Las Colinas and Valley Ranch, run on gate hardware that is now hitting 20 to 35 year failure cycles, and that’s where our work concentrates.
Why Ironworks Gate Co. Is Irving’s Preferred Gate Access Control Company
We have been working gates since 1984, and the work we do in Irving today draws on the full scope of that experience. Victor Salinas leads our team, and he has built the company around a simple idea: the gate should work the way it did when it was installed. That matters in Irving because so many of the gates here were installed during the building waves of the 1980s through the early 2000s, and the fixtures, operators, and wiring are aging together.
Irving homeowners call us because we will be there when we say. Our dispatchers send crews to Irving every week, and we know the difference between a Valley Ranch canal-front estate and a Las Colinas townhome enclave. That local knowledge means we arrive with the right parts and the right tools for the job. When a homeowner tells us their gate has stopped responding to the keypad, we already know to check the post alignment first, because that’s what Irving’s clay soil does to gates.
Every job we complete in Irving carries the 90-Day Done Right Promise in writing. If it’s not right, we return and correct it. No paperwork, no arguing, no exceptions. A live person answers every call, 24 hours a day, 7 days a week. Homeowners who have lived in Irving for twenty or thirty years remember contractors who did not finish the job. We are the company that stands behind it.
Our Gate Access Control Services in Irving
We handle the entire gate access control picture in Irving, from the first keypad keypress to the motor that opens the gate. If you need a new system installed or an old one repaired, we will walk through the options in plain language and quote a price before any work begins.
Keypad Entry
Keypad entry is the most common access point on Irving gates, and it is also the one that takes the hardest beating from the weather. Sustained 100°F+ summer heat in Irving degrades wiring insulation on exposed runs, and storm season brings humidity that corrodes contacts. We install and service wired and wireless keypads, and when a keypad fails in Irving, we check the wiring path first, not just the keypad itself.
Phone Entry
Phone entry systems let a visitor call from the gate to the house, and the homeowner can open the gate from inside. In Valley Ranch, where many homes sit on larger lots with gates set far from the front door, phone entry is a practical choice. We install and repair phone entry units that work with cellular or landline connections, and we make sure the intercom audio is clear, not scratchy or faint.
Card Reader
Card readers are common at HOA-governed entrances in Las Colinas and at the estate properties that wrap around the golf courses and canals. We install and service card readers that integrate with the gate operator, and we handle the low-voltage wiring runs too. When a card reader fails intermittently, in Irving it is often a corroded connection or a wire that has been nicked during landscaping, not the reader itself.
Video Intercom
Video intercom gives you eyes on the gate before you open it. For Irving homeowners in neighborhoods like University Hills or the estates along North MacArthur Boulevard, that visibility is a selling point. We install video intercom systems with clear night vision and a screen or app that works the way you expect. If you are adding video to an existing gate, we will check whether the conduit is already there or whether we need to run new line.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Irving
We are trained and equipped on nine gate-automation brands, including LiftMaster, FAAC, Elite, and Mighty Mule. That breadth matters in Irving because the gates here run on a mix of original equipment from the 1980s and 1990s and newer replacements. A Valley Ranch estate might have a Viking swing arm that is completely obsolete, while the Las Colinas townhome next street over runs a LiftMaster installed five years ago. We carry common parts and boards in our trucks, so the correct fix is made on the first visit, whatever is on the driveway.
Common Gate Access Control Problems We See in Irving Homes
Irving’s soil, weather, and housing stock combine to create a very specific set of gate access problems. Here are the ones we see most often:
- Posts shifted by Blackland Prairie clay. Irving sits on expansive clay that heaves when wet and contracts when dry. Gate posts move seasonally, which throws off the alignment between the gate leaf and the operator. A keypad that worked in April may bind the gate in August because the post moved half an inch. Post realignment is the first step on nearly every service call in Las Colinas and Valley Ranch.
- Builder-grade operators dying young. Many Las Colinas townhome enclaves were built with the least expensive operator the builder could source. Those units fail within 5 to 7 years under Irving’s summer heat. The circuit board cooks, the plastic housing warps, and one day the gate simply stops. Replacement with a proper LiftMaster or FAAC unit is the fix.
- No conduit runs for retrofits. A surprising number of manual ornamental iron gates in Valley Ranch and Las Colinas were installed without conduit for power and low-voltage wiring. When a homeowner decides to add automation, we have to trench from the house or a nearby power source to the gate. That adds cost but it is the only correct way to do the job.
- Storm winds bending slide gates off their rollers. Irving sits squarely in a severe-weather corridor, and straight-line winds from spring storms regularly bend cantilever slide gates off their rollers. The original post footings in many HOA-governed entrances have already shifted in the clay, which makes the gate more vulnerable. We see this in Valley Ranch and along the canal-front streets after every significant storm.
Pricing for Gate Access Control in Irving, TX
A keypad replacement in Irving typically runs $250 to $450, including the part and the wiring check. A phone entry system installation starts around $600 and can run past $1,200 depending on the distance from the house and whether we need to run new conduit. Card reader installations for HOA entrances in Irving generally land between $800 and $1,800 per reader, including the low-voltage wiring and programming. Full gate access control retrofits, adding automation and a keypad or intercom to a manual gate, typically range from $2,800 to $6,000 in Irving once trenching and conduit are factored in. Every quote is provided in writing and agreed upon before work starts. Call (432) 237-4128 for a free estimate on your specific gate.
We Also Serve Cities Near Irving
Our Gate Access Control team works throughout the Irving area, and we regularly serve homeowners in Carrollton, Coppell, Euless, and Grapevine. If you live in one of those communities and you’re looking for Gate Access Control in Irving or nearby, call us and we’ll get you on the schedule.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Irving
Las Colinas sits on Blackland Prairie expansive clay soil that swells when wet and shrinks when dry. The repeated expansion and contraction throughout Irving’s wet springs and dry summers pushes gate posts out of alignment, sometimes by two inches or more in a single season. Neighboring cities built on more stable soils do not see this same degree of movement. The fix is post realignment with proper footing that resists seasonal heave, which we perform on nearly every Las Colinas service call. Call (432) 237-4128 if your gate is binding or dragging, and we’ll assess the post before recommending anything else.
In most cases, no. Many manual gates in Valley Ranch were installed without conduit for power or low-voltage wiring, because the original builder never anticipated automation. Adding a keypad, phone entry, or operator requires a new conduit run from the house or a nearby power source to the gate. This involves trenching, which typically adds $1,200 to $2,500 to the project depending on distance and soil conditions. We will not shortcut this with surface wiring or an undersized solar setup, because it will fail. Estimates are free, and we quote the full trenching cost before any work begins.
In almost every case, no. Linear, Viking, and early LiftMaster swing-gate operators from the 1980s and 1990s are now fully obsolete, and replacement logic boards and limit switches are no longer manufactured. What looks like a simple board swap almost always becomes a full operator replacement, because the old board is unavailable and the remaining components are too worn to justify a patch. That is a pattern we see regularly in Valley Ranch and Las Colinas. We price the replacement honestly from the first call, and we’ll show you the quote before any work starts. Call (432) 237-4128 to get an exact figure for your gate.
Many Las Colinas gate systems are governed by HOA maintenance contracts rather than individual homeowner decisions. That means approval for a repair or replacement may need to go through the association board or a property manager before we can proceed. We are experienced with this process, and we can provide the written documentation, scope of work, and cost breakdown that HOA boards require. We will also perform the work to the association’s standard and stand behind it with our 90-Day Done Right Promise. If you are a board member or property manager, call (432) 237-4128 and ask for Victor Salinas directly.
Irving sits squarely in a high-frequency severe-weather corridor, and spring straight-line winds regularly bend cantilever slide gates off their rollers. The problem is worse in HOA-governed entrances where original post footings have already shifted in the clay soil, because the gate is no longer sitting level before the storm even hits. The fix is post realignment, roller replacement or reinforcement, and in some cases a heavier-duty track system designed for wind load. If your gate came off its rollers after a storm, call (432) 237-4128 and we’ll get it back on track same day.
If your gate access control in Irving is failing, or you are ready to add automation to a manual gate, call (432) 237-4128 today. We will show up when we say, quote the price upfront, and stand behind the work in writing. That’s the way it should be.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Irving and the surrounding metroplex for over 42 years.