Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Irving
Gate installation in Irving costs between $2,800 and $9,500 for a typical residential driveway gate, with pedestrian gates running $1,200 to $4,000 depending on automation. Most installations in Las Colinas and Valley Ranch take one to two days once materials are on site. If you’re calling from North Irving near MacArthur or down around the Medical District, we can usually have a technician at your property within 48 hours for measurements and a written estimate. Call (432) 237-4128 and a live person answers, day or night.
We know Irving gates the way only a company that has pulled hundreds of them apart can. The soil here fights you. The heat cooks circuit boards. And a lot of what hangs on those posts in Las Colinas and Valley Ranch was installed when the community was first built out, which means it’s now twenty to thirty-five years old and showing it. That’s the work we take on, and it’s the work we’ve been doing for over 42 years.
Why Ironworks Gate Co. Is Irving’s Preferred Gate Installation Company
We’ve spent decades working the Metroplex, and the gate calls we get from Irving have a rhythm to them. The homeowner on a canal-front lot in Valley Ranch whose original swing gate operator finally gave out. The Las Colinas townhome association that needs three entrance gates replaced before the next big storm season. The family off Rochelle Boulevard whose double driveway gate is sagging so badly it scrapes the concrete every time it opens. These are the calls Victor Salinas built this company to answer.
Our technicians arrive in uniform, background-checked, and with a clear scope of work before a single bolt is turned. The price you approve is the price you pay. We stand behind every job with our written 90-Day Done Right Promise: if it isn’t right, we come back and make it right. No paperwork, no arguing, no exceptions.
Crews serving Irving dispatch from our Dallas-Fort Worth office, so we’re local in practice even when the truck starts a few exits away. We schedule by neighborhood familiarity. We know that a slide gate on a Valley Ranch canal-front property faces different stressors than a swing gate on a newer lot near Lake Carolyn. That matters when you’re choosing who to call.
Our Gate Installation Services in Irving
Driveway Gate Installation
A new driveway gate in Irving runs $3,200 to $9,500 installed, depending on gate width, material, and automation. Most residential driveway gates in Irving are ornamental steel or wrought-iron, and we fabricate to fit the existing opening rather than forcing a stock size. On properties in Las Colinas and Valley Ranch, we almost always begin with a post inspection because the Blackland Prairie clay here expands and contracts so aggressively that even a poured footing can shift within a few seasons. We set new footings deeper than code minimums in this soil, and we tell you exactly what we found before we touch anything.
Pedestrian Gate Installation
Pedestrian gates in Irving typically cost $1,200 to $4,000 with a keypad or card reader. These are common at HOA-controlled community entrances in Valley Ranch and around the Las Colinas Urban Center, where security access gates see heavy daily use. We size the posts and hinges for that traffic, and we spec operators that can handle the cycle count. For a homeowner on a standard lot, a pedestrian gate is often the smart choice when a full driveway gate isn’t feasible.
Sliding Gate Installation
Slide gates in Irving run $3,500 to $11,000. They’re the better answer on properties where the driveway slopes toward the street or where a swing gate would block the sidewalk or a portion of the lawn. In Irving’s clay soil, the rail and roller alignment on a slide gate is critical. We set the rail on a deeper base and use adjustable rollers so when the ground moves, the gate can be trued up without a full reset. The swing is that spring storm season with its straight-line winds bends a cantilever gate off its rollers fast, so we build the posts for wind load, not just gate weight.
Swing Gate Installation
Swing gate installation in Irving runs $3,000 to $8,500 for a single leaf, and $5,500 to $15,000 for a double gate. Most of the legacy gates we replace in Valley Ranch and Las Colinas are swing gates. The design works, but the age is against them. We hang new swing gates with reinforced hinge posts and fresh operators with safety photocells on both sides. If you have a double gate, we also inspect the center post, which is often the first thing to fail in expansive clay.
Double Gate Installation
Double driveway gates are common in Irving’s estate-sized lots and HOA entrances. A full double gate with automation typically falls between $5,500 and $15,000 in Irving. The wider the opening, the heavier the gate, and the more the soil movement affects alignment. We install double gates with independent post foundations and a common operator control board so both leaves open and close on the same timing. If one side starts lagging, that’s a sign the ground has moved under one post, and we address it before it becomes a permanent misalignment.
Security Gate Installation
Security gates for Irving properties, including commercial entrances, estate homes, and gated communities, range from $6,000 to $25,000 depending on scale and access control. We install keypad entry, telephone entry systems, and card readers alongside the gate hardware. For HOAs in Valley Ranch, Las Colinas, and around the Urban Center, we coordinate with your board and property manager on approvals, utility locates, and shared maintenance contracts.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Irving
We’re trained and certified on nine gate-automation brands, and in Irving we see a lot of legacy Viking and Linear equipment, along with newer LiftMaster and Elite installations. Because we stock common parts and service all major brands, we can often complete a full operator replacement same week without waiting on a distributor. If you have an old Mighty Mule or a builder-grade opener that’s still working, we’ll fix it. But honest advice from our Irving techs: if your logic board is obsolete, replacement is usually the smarter money. We’ll walk you through the math before you commit.
Common Gate Installation Problems We See in Irving Homes
- Shifting gate posts from Blackland Prairie clay. The same expansive soil that cracks Irving driveways also heaves gate posts seasonally. A gate hung level in March can bind at the latch by August. Post inspection is our first step on every installation estimate in Irving.
- Obsolete operators on 1980s and 1990s Valley Ranch gates. Original Viking, Linear, and early LiftMaster swing-gate openers from the mid-80s through early 2000s are no longer supported. Logic boards and limit switches aren’t manufactured. What looks like a simple board swap almost always becomes a full operator replacement, so our estimates price that reality from the first call.
- Wind-bent cantilever slide gates. Irving sits in a severe-weather corridor, and straight-line winds from spring storms regularly bend older slide gates off their rollers. If the post footing was already shifting in the clay, the whole gate hangs crooked until the post is reset.
- HOA approval and access requirements in Las Colinas and Valley Ranch. Gated community entrances often fall under association maintenance agreements, not individual homeowner calls. We work under those approval processes regularly and can handle the paperwork and coordination.
Pricing for Gate Installation in Irving, TX
Here’s what we’re currently seeing in Irving:
- Pedestrian gate with keypad: $1,400 - $4,200
- Single swing gate, automated: $3,000 - $8,500
- Double swing gate, automated: $5,500 - $15,000
- Sliding gate, automated: $3,800 - $11,000
- Security gate with access control: $6,000 - $25,000
What moves the price in Irving: gate width and weight, whether new posts need to be set (and how deep we have to go in this clay), access control features, and whether the old operator can be reused. Every quote is written and agreed to before work starts. Estimates are free, and seniors and veterans always get 5% off. We also offer a $89 seasonal tune-up and a free second opinion on any written estimate.
We Also Serve Cities Near Irving
Our crews work throughout the northeast Metroplex. If you’re in Irving today, we’re happy to schedule in Carrollton, Coppell, Euless, and Grapevine as well. Many of our Irving customers also have properties in those cities, and we coordinate across them so you only deal with one vendor. The full scope of our Gate Installation services applies across the entire area.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Irving
The Blackland Prairie clay under Irving expands and contracts with moisture more aggressively than the more stable soils found in Dallas and Coppell. When the clay swells after rain and shrinks during dry heat, anything anchored in it moves, including gate post footings. That’s why we recommend deeper footings and why post inspection is the first step on every installation we price in Irving.
If it’s a legacy Viking or Linear from the 1980s or 1990s, replacement is almost always the right call. The logic boards and limit switches are no longer manufactured, so repairs mean used parts or temporary fixes. We’ll retrofit when the gate itself is still solid and the operator is a newer model. But when the board is dead and the hinges show wear, you’ll spend less over three years replacing the operator and hinge posts than chasing an obsolete system. Call (432) 237-4128 and we’ll give you an honest assessment for free.
Yes. Any automatic gate installed in Irving must include entrapment protection per current UL 325 safety standards. That means safety photocells, contact edges, or both, plus an audible alarm on certain operator types. We spec every new installation with fresh safety devices, even if the old gate had none. This is not a corner we cut, and it’s one of the reasons our gates pass HOA and insurance inspections without drama.
We handle the approval process for you. Many gated communities in Valley Ranch and Las Colinas require architectural review, utility locates, and sometimes written specifications before installation begins. We’ve done this enough in Irving that we know what each community’s board typically asks for, and we prepare the package so you don’t have to chase paperwork. We also work within shared maintenance contracts when the gate is association-owned rather than on your private lot.
Not necessarily. A sagging gate is usually a hinge and post problem, not a gate-leaves problem. If the post has shifted in the clay and the hinge welds are intact, we can often reset the post and rehang the existing gate for a fraction of a new installation. If the hinges are torn or the gate frame is pulling apart, replacement makes more sense. We’ll show you the condition before we quote, so you’re deciding on facts, not a sales pitch. Call (432) 237-4128 for an exact quote on your gate.
Contact Your Local Irving Gate Installation Team
If you live in Irving, Texas and need a new driveway gate, a replacement for an old swing gate, or a full security gate with access control, call us today at (432) 237-4128. A live person answers, 24 hours a day, 7 days a week. We’ll schedule a free estimate, answer your questions in plain English, and give you a written price before any work begins. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Irving since 1984.