Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Hurst
Gate motor and opener repair in Hurst usually comes down to one thing the national companies miss: the ground under the post. Our Gate Motor & Opener crew has worked enough driveways across 76053 and 76054 to know that Blackland Prairie clay moves more than any hardware catalog accounts for. When your swing gate binds in August or your slide motor strips a gear in March, the motor is often the symptom, not the cause. We serve Hurst daily from our Dallas-Fort Worth dispatch office, and we quote every job up front before turning a single bolt. Call (432) 237-4128 for a free estimate and a straight answer.
Why Ironworks Gate Co. Is Hurst’s Preferred Gate Motor & Opener Company
We are the dedicated gate specialist for homeowners in Hurst who want the job done once. Not the handyman who also does fences and sprinklers. Not the security company that subcontracts the welding. We do driveway gates: motors, arms, hinges, posts, keypads, and the welding between them. Victor Salinas leads the company with a blacksmith’s eye for metal fatigue and an electrician’s discipline around control boards. When we tell a Hurst homeowner their 1972 iron gate can be salvaged instead of replaced, it is because we have seen its exact failure mode a hundred times along Brown Trail, Precinct Line Road, and the ranch-style streets in between.
Every job we complete is protected by the 90-Day Done Right Promise, in writing. If something is not right, we come back and make it right. No paperwork, no arguing. That is the Keystone Standard, and it has been the backbone of our reputation for over 42 years, since 1984.
Hurst customers get a live person when they call, 24 hours a day, 7 days a week. No voicemail trees, no answering service, no waiting until Monday. Our technicians are background-checked, uniformed, and they work in your driveway the way they would work in their own mother’s.
Our Gate Motor & Opener Services in Hurst
Motor Installation
We install operators on existing gates and full new gate-automation packages throughout Hurst. Whether the driveway is a short suburban apron off Harwood Road or a long acreage entrance off Precinct Line, we size the operator to the gate weight and span, not just the brochure rating. For Hurst properties where running electrical to the gate is impractical, we regularly install solar gate openers paired with battery backup. The key here is a gate that travels true on properly footed posts. A solar panel can only feed the battery so much; if the gate fights the operator because a post has heaved 3 inches out of plumb, you will be recharging or replacing batteries every week. We fix the footing first.
Motor Repair
Most motor repair calls in Hurst are not actually motor failures. They are mechanical bind, stripped limit logic, or a control board fighting a gate that no longer swings square. We see swing openers that trip entrapment protection every afternoon because the gate hangs low at the latch side. We see slide motors that burn out V-belts trying to drag a gate across a track lifted by clay heave. Our repair starts with the entire system: post, hinge, gate frame, operator bracket, motor, and board. That is how we get it right on the first visit instead of the third.
Linear Motor
Linear operators work well for many Hurst driveway gates, particularly the mid-century ornamental iron gates common on ranch homes built from the late 1950s through the 1970s. But a linear arm is unforgiving about geometry. If the gate post has tilted even two inches off vertical, the arm binds, the gears grind, and the motor overheats. In Hurst, where the clay soil routinely heaves posts several inches out of line, we often re-set the post and realign the arm in the same visit. The operator itself is frequently still fine.
Slide Motor
Long driveways and wide entrances often use slide gates, and Hurst has plenty of them in the acreage zones around the city’s edge. Slide motors put constant load on the gear rack and the support wheels. A gate that scrapes the ground because soil movement shifted the track will stall and strip the motor. We rebuild the track bed, adjust the wheels, and reset the limits so the motor works in its designed range instead of straining at the edge of failure.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hurst
We are trained and equipped on nine major gate-automation brands, including LiftMaster, FAAC, Mighty Mule, and Elite. That breadth matters in a city like Hurst, where the gate at the end of the driveway might be a 1980s Mighty Mule one job and a modern LiftMaster board the next. Our trucks carry common parts for the brands most frequently installed across the mid-cities, so a repair rarely waits on a parts order. Whether you have an existing opener or we are recommending one, we will match the right operator to your gate and your Hurst soil conditions.
Common Gate Motor & Opener Problems We See in Hurst Homes
- Clay heave tilts the post, and the motor pays for it. In the older subdivisions along Brown Trail and the Precinct Line Road corridor, concrete posts set in the 1960s and 1970s now sit 3 to 5 inches off vertical. The post is structurally sound, but the tilt makes the swing arm bind, trip safety sensors, and strip gears.
- August rain after a long dry spell is the worst time for gate motors. North Texas heat expands metal gate frames, cracking welds at stress points. Then a heavy rain breaks the dry cycle and the clay soil shifts fast. The gate moves, the motor strains, and the weld at the operator bracket lets go.
- Solar openers drain batteries when the gate travels hard. On Hurst acreage entrances with no grid power, a shifted post or sagging gate makes the operator work 2 to 3 times harder. Solar panels cannot keep up, and the battery is dead in days instead of years.
- Rust-through at the hinge collar on 50-year-old iron gates. The original wrought iron driveway gates on Hurst’s mid-century ranch homes have seen decades of wet/dry cycles. When the hinge collar rusts and cracks, the gate drops and the opener drags it instead of swinging it.
Pricing for Gate Motor & Opener in Hurst, TX
A typical gate motor repair in Hurst runs $180 to $340, which covers diagnosis, part replacement for common failures like capacitors, limit switches, and control boards, and labor. Motor installation on an existing gate runs $850 to $2,200 depending on the operator weight class and whether solar or battery backup is included. Slide motor conversions run higher, usually $1,500 to $3,500, because the track bed and gear rack almost always need leveling on Hurst’s moving clay. Post resetting and re-footing, which is the single most common repair we perform in this city, adds $400 to $900 depending on footing depth and pier requirements. Every price is quoted in writing and agreed before work begins. No surprises on the bill. Call (432) 237-4128 for a free estimate on your specific gate.
We Also Serve Cities Near Hurst
While Hurst keeps our crews busy, we regularly run service calls in Bedford, North Richland Hills, Colleyville, and Euless. If your property sits near the city line, you are still in our service area. This page covers Gate Motor & Opener in Hurst in detail; the same crew and the same guarantee apply across the mid-cities.
Serving Hurst, TX - Our Local Coverage Area
We’re based in the Hurst area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Hurst
Because the Blackland Prairie clay under your gate post shrinks during dry spells and swells when rain finally arrives, and that movement shifts the post out of plumb by several inches. The opener is now fighting a gate that does not travel true. The fix is re-plumbing the post with a proper footing, not replacing the motor. Call (432) 237-4128 for a free evaluation of the post and operator together.
Yes, and it can work reliably, but only if the gate moves smoothly and the post is plumb. A solar opener on a binding gate drains the battery in days, not months. We size the panel and battery to the duty cycle and we fix the gate geometry first. Schedule a free on-site measure and we will give you a written plan and price.
Probably not. The sag means the hinge post has moved or the hinge collar has rusted and dropped the gate. The motor may be perfectly fine. Once we reset or rebuild the post and replace the hinge hardware, the opener often runs as it did originally. We always inspect the motor before recommending replacement, and the quote reflects what we actually find.
Yes. Under current UL 325 standards, automatic gate operators require entrapment protection, typically photo eyes and reverse sensing. We install and test these on every gate we automate or repair. If your existing opener was installed before these requirements or the sensors have failed, we will bring the system up to standard as part of the job.
Keep the gate balanced, the post plumb, and the operator sized to the full gate weight and span. On wide farm gates, the lever arm of a long gate multiplies the load on the motor. A heavier-duty linear or slide operator matched to the gate, with proper support wheels and a level track, prevents the stalling we commonly see on under-speced installations. Call (432) 237-4128 for a free assessment and a written quote.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Hurst and the mid-cities with gate repair, installation, and automation since 1984.