Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Irving
Gate hinge replacement, post straightening, rail repair, and custom welding in Irving, TX typically runs $140-$900 depending on the part and the damage. Most jobs are completed in a single visit, and we quote the full price before any work begins. If you live in Irving and your gate is sagging, dragging, or locked shut after a storm, call (432) 237-4128 and a live person will answer, day or night.
We’ve worked on gates throughout Irving for years, from the canal-front estates in Valley Ranch to the townhome enclaves in Las Colinas and the older ranch neighborhoods around Northgate and University Hills. We know what Irving weather does to metal. We know what Irving clay does to gate posts. And we know how to fix it so it stays fixed.
Why Ironworks Gate Co. Is Irving’s Preferred Gate Parts & Welding Company
Irving homeowners do not want a handyman with a welder in the back of a pickup. They want a gate company that has seen this exact problem a hundred times, on homes built during the same decade as theirs, on soil that behaves the same way. That is what we bring.
Victor Salinas leads our team, and he has spent over four decades working steel and automation. When a Las Colinas gate sags after a spring storm, or a Valley Ranch slide gate gets knocked off its rollers by straight-line wind, our crews have already handled it twice that month. We know which Irving gates were hung in the 1980s and which operators are now obsolete. That local knowledge changes how fast we diagnose a problem, and how accurately we price the fix.
Every job we complete in Irving is covered by our 90-Day Done Right Promise, a written guarantee with no fine print and no arguments. If it is not right, we come back and make it right. Simple as that.
Our Gate Parts & Welding Services in Irving
Hinge Replacement
Hinges fail in Irving for a specific reason: Blackland Prairie clay. The soil under your gate posts expands when it is wet and contracts when it is dry. That movement torques the hinge welds, especially on heavy ornamental iron gates like the ones throughout Las Colinas and Valley Ranch. We cut out the old hinge, weld in a heavier barrel hinge if the panel weight calls for it, and confirm the post is still plumb before we hang the gate back. A hinge swap on a residential swing gate in Irving usually runs $140-$320 per hinge, including the weld and adjustment.
Post Replacement
When a post has rotated in saturated clay, shimming the hinges will not fix it. The gate will sag again in a season. We pull the post, inspect the footing, and pour a deeper footing with proper drainage so water is not sitting against the steel. On canal-front properties and other soft-soil conditions, we may recommend helical piers to anchor the post below the expansive layer. Post replacement in Irving typically runs $450-$900 per post depending on the gate weight and footing depth.
Rail Repair
Cantilever slide gates along Valley Ranch canal entrances and Las Colinas estates take a beating from Irving’s storm winds. A solid infill gate catches wind like a sail. Straight-line gusts bend the top rail, the gate drags off its rollers, and the whole panel binds. We straighten the rail, reinforce bent sections where the steel is not cracked, and re-square the gate before resetting the rollers. If the rail has stress fractures, we cut and weld a new section rather than trying to bend compromised metal back into shape. Rail repair in Irving runs $250-$600 depending on the gate length and how far out of true it is.
Custom Welding
We fabricate and weld repair plates, gussets, picket replacements, and custom brackets for Irving gates old enough that replacement parts are no longer manufactured. That includes the 1980s ornamental iron gates in Valley Ranch, where design details match the original canal-side architecture. We match the profile, grind the weld clean, and prime and paint the repair so it disappears into the existing work. Our Gate Parts & Welding team does this in a single visit on most residential jobs, and the price is settled before we strike an arc.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Irving
We are trained and equipped on nine gate-automation brands, including Viking, Linear, and BFT, which covers the majority of the early-generation operators still running in Valley Ranch and Las Colinas. When we replace a Viking swing-gate operator that is no longer supported by the manufacturer, we carry the new unit and the adapters needed to mount it to the existing gate. Our trucks are stocked with common Irving parts: roller assemblies, hinge barrels, limit switches, photo-eye brackets, and the steel stock we need for most weld repairs. That means most Irving jobs are finished the same day we arrive.
Common Gate Parts & Welding Problems We See in Irving Homes
- Posts heaving in Blackland Prairie clay. This is the single most common failure we see in Irving, and it is worse after wet springs. The post moves, the hinge welds crack, and the gate sags out of plumb. The fix starts at the footing, not the hinge.
- Cantilever gates bent off their rollers by straight-line winds. Irving sits in a high-frequency severe-weather corridor. Solid infill slide gates catch wind, the rail bends, and the gate drops off the rollers. We see this most often on Valley Ranch canal-front entrances.
- Obsolete operators with no replacement boards. Early Viking, Linear, and early LiftMaster swing-gate operators are no longer manufactured. A service call that looks like a board swap usually converts to a full operator replacement, and we price that honestly from the first call.
- Weld fatigue on heavy ornamental gates. Las Colinas has one of the densest concentrations of 20-to-35-year-old wrought-iron automatic gates in the Metroplex. Decades of heat, wind, and clay movement work on those welds. When one pops, the gate droops and the operator strains against the extra drag.
Pricing for Gate Parts & Welding in Irving, TX
Here is what Irving homeowners should expect to pay for common gate welding and parts work:
- Hinge replacement: $140-$320 per hinge
- Post replacement with new footing: $450-$900 per post
- Rail repair on a cantilever slide gate: $250-$600
- Gate roller replacement: $120-$280 per roller assembly
- Custom welding repair (cracked picket, broken bracket, gusset plate): $180-$450
- Full operator replacement (parts and labor): $1,200-$2,800 depending on brand and gate length
Every price is quoted and agreed before we start. You will never get a surprise invoice from us. We also offer free second opinions on any written estimate you have received from another company, and a $50 discount on any repair over $250. Call (432) 237-4128 for an exact quote, estimates are free.
We Also Serve Cities Near Irving
Our crews serve Gate Parts & Welding in Irving and the surrounding communities. If you are in Carrollton, Coppell, Euless, or Grapevine, we make the short drive and bring the same trucks, the same parts stock, and the same 90-Day Done Right Promise. Call us and we will get you scheduled.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Irving
Irving is built on Blackland Prairie expansive clay, which swells when wet and shrinks when dry. That seasonal movement rotates gate posts and snaps hinge welds. The permanent fix is to set the post deeper than the active shrink-swell layer, improve drainage at the footing, and in the worst cases anchor the post with helical piers. Shimming or re-welding without addressing the footing will fail again within a season or two, and we will tell you that before we start. Call (432) 237-4128 and we can look at your post and tell you what is actually happening.
Because Viking no longer manufactures logic boards or limit switches for the early-generation operators installed throughout Las Colinas in the 1980s and 1990s. Those units are fully obsolete and no aftermarket source exists for the boards. The honest repair in almost every case is a full operator replacement, and we price that in from the first phone call. We install new Viking-compatible or modern replacement operators that fit the existing gate and mounting layout. Estimates are free at (432) 237-4128.
We start by checking the rail for bends, cracks, and stress fractures, then determine whether each section is straightenable or needs to be cut out and replaced with new steel. After the rail is true, we re-square the gate panel, reset or replace the roller assemblies, and run the gate through several full cycles to confirm the operator is not binding. On Valley Ranch canal-front entrances, we also check the post footings, because saturated ground after a storm often means the posts moved at the same time as the rail bent. Call (432) 237-4128 and we will come out and look.
Yes, every automatic gate has a manual release designed for exactly this. The details depend on your operator brand, but the release is usually a pull handle or key release on the operator itself, and the procedure is covered in the owner’s manual. The safest approach during an Irving power cut is to release the operator, move the gate manually to the fully open or fully closed position, and leave it there until power returns. Do not force a gate that is dragging on bent rails or a shifted post, you can do more damage and risk injury from the gate’s weight. If you are unsure where your release is or how to use it, call (432) 237-4128 and we will talk you through it on the phone.
Yes. Irving follows the UL 325 standard for automatic gate safety, which requires functioning entrapment protection on any automatic gate, including photocell sensors and reversing edges where applicable. When we repair or replace any part that affects gate movement, we confirm the safety devices are present, aligned, and functioning. If a storm repair has knocked your photocells out of alignment, we re-align them on the same visit. That is not an upsell, it is the law and the difference between a safe gate and a dangerous one. Call (432) 237-4128 to schedule a check.
Call Ironworks Gate Co. for Gate Parts & Welding in Irving
If you live in Irving and your gate is sagging, dragging, or locked up after a storm, call (432) 237-4128. A live person answers 24 hours a day, 7 days a week. We will give you a straight answer, a free estimate, and a written 90-Day Done Right Promise on every job we complete. You will not get a voicemail tree. You will get Victor Salinas and a team that has been doing this work right for over 42 years.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Irving and the Dallas-Fort Worth metro.