Gate Installation in Hurst - Written Price, Install Date Set

Gate Installation in Hurst: Built for Blackland Prairie Clay

A new driveway gate in Hurst costs $3,800-$12,500 installed, with double swing gates and solar-equipped systems at the upper end. Most jobs take one to two days once materials arrive. The real variable here isn’t the gate itself. It’s what’s underneath it. Hurst sits on some of the most expansive clay soil in Tarrant County, and that clay decides whether your gate stays square for forty years or starts leaning in five.

Call (432) 237-4128 for a free measure and a written price before any work begins. We’re Ironworks Gate Co., and we’ve been doing this for over 42 years.

Why Hurst Homeowners Call Ironworks Gate Co. for Gate Installation

We’re not the cheapest gate company in Hurst, and we don’t try to be. We’re the one that fixes what the cheap installs leave behind. When a gate post heaves 4 inches out of plumb on Brown Trail, or a double swing gate binds on Precinct Line Road, our crews already know the cause before they pull the post: Blackland Prairie clay.

Victor Salinas leads our team. He’s spent decades working on Tarrant County gates, and he trains every technician on soil behavior before they ever touch a hinge collar. That’s why our Gate Installation service in Hurst comes with a written 90-Day Done Right Promise. If something isn’t right, we come back and make it right. No paperwork, no arguing.

Every job is priced up front, in writing, before we turn a single bolt. A live person answers our phone 24 hours a day, seven days a week. No voicemail trees.

Gate Installation Services We Handle in Hurst

The right gate for a 1960s brick ranch on a concrete slab is not the same as the right gate for a long driveway off Brown Trail. Here’s what we install across Hurst’s 76053 and 76054 zip codes.

Driveway Gate Installation

Driveway gate installation in Hurst runs $4,500-$12,500, depending on width, material, and whether you’re adding automation. We handle ornamental steel and wrought iron gates that match the mid-century character of Hurst’s brick ranch homes, plus heavier estate gates for larger lots near the Precinct Line Road corridor. The footing depth matters more than the gate style. In this clay, a standard 24-inch footing is a future repair call. We go deeper, with a bell-bottom base that resists shrink-swell heave.

Swing Gate Installation

A single swing gate in Hurst typically runs $3,800-$7,200. Double swing gates run $5,500-$11,000 installed. Swing gates are the most common choice for Hurst’s older homes because they fit the existing driveway width without requiring new track. But the clay here tilts posts enough to bind swing arms and tear hinge collars within a few years if the footing wasn’t engineered for expansive soil. We set posts differently in Hurst than we would in Bedford or Colleyville. The soil demands it.

Sliding Gate Installation

Sliding gates in Hurst run $4,200-$9,800, more if the driveway slopes or needs a longer cantilever span. They’re a good fit for wider driveways and lots where a swing gate would eat too much of the yard. The catch here is the rack and pinion alignment. When the clay heaves and shifts the posts, a sliding gate’s rack misaligns and the motor jams. We install sliding gates with heavier post footings and adjustable rack mounts that tolerate the movement Hurst clay inevitably brings.

Pedestrian Gate Installation

Pedestrian gates in Hurst run $2,200-$4,800, including hardware and a proper concrete footing. Most of the pedestrian gates we install are matched to existing driveway gates, often replacing an old wrought iron side gate that’s rusted through at the hinge collar. We match the pattern and finish to the home’s original gate when possible, which matters on the older properties along Brown Trail and Pipeline Road.

Solar Gate Opener Installation

Solar openers paired with a new Hurst gate run $1,800-$3,400 added to the gate cost. Many acreage entrances in Hurst’s 76054 can’t practically reach mains power without trenching hundreds of feet. Solar is the right answer, but only if the panel gets real sun. Heavily shaded entrances under mature pecan and oak trees are common here, and we’ll tell you honestly if solar won’t keep up. A properly sized panel and a quality battery bank from LiftMaster or Ghost Controls makes the difference between a gate that opens every time and one that dies on a cloudy week.

What Hurst Clay Does to Gate Posts (And How We Fix It)

This is the part that matters more than the gate itself. Hurst sits squarely on the Blackland Prairie’s expansive clay formation. That clay swells when it’s wet and shrinks when it’s dry, and it does both with enough force to move concrete. In Hurst’s 76053 and 76054 neighborhoods, we routinely see gate posts leaning 3-5 inches off vertical while the concrete post itself remains structurally intact. The failure isn’t the hardware. It’s the soil.

In the older subdivisions along Brown Trail and near the Precinct Line Road corridor, concrete gate posts installed in the 1960s and 70s have heaved so severely from clay movement that the fix isn’t a new gate at all. The post gets excavated, plumbed, and re-set in a bell-bottom pier footing that flares wider at the base to resist future heave. A straight-sided footing in this clay is a five-year guarantee of a leaning gate.

We recently replaced a sagging double swing gate at an older ranch-style home off Brown Trail. The original concrete hinge post had heaved 4 inches out of plumb. We excavated around the post, poured a deeper bell-bottom footing with a wider base, and re-hung the 16-foot double swing gate with a new LiftMaster operator and safety photocells. That gate tracks true through full open-close cycles, even after heavy rain. The homeowner had been told by another company that the gate itself was shot. The gate was fine. The footing was wrong.

North Texas heat adds another layer. Metal gate frames expand and contract through 30-degree daily swings in August, and the stress concentrates at weld points. Wide double gates on long driveways are the worst offenders. Add wet-dry cycles that drive the clay movement, and Hurst gates face a compounding stress cycle that peaks in late summer when a long dry spell breaks with heavy rain and the soil shifts fastest.

Trusted Gate Opener Brands We Install in Hurst

We install and service LiftMaster, FAAC, Elite, and Mighty Mule operators, plus five other major automation brands. Every technician is trained on all nine, which means we don’t push one brand on every job. We pick the operator that fits your gate’s weight, width, and power situation. For Hurst’s long driveway double gates, that often means a heavier-duty LiftMaster or FAAC unit with a properly rated gearbox. We keep common parts stocked locally, so a repair call doesn’t turn into a two-week wait.

Common Gate Installation Problems We See in Hurst Homes

• Post heave from clay shrink-swell. Hurst’s expansive soils push concrete posts out of vertical within 5-7 years of a standard installation. We fix this with bell-bottom pier footings that flare at the base and resist the upward force of swelling clay.
• Weld cracks at frame stress points. The heat expansion cycles in a North Texas summer concentrate stress at weld joints, especially on wide double gates. We reinforce stress points during fabrication and use heavier gauge steel where Hurst’s climate demands it.
• Solar opener failures on shaded entrances. Mature tree canopies along Hurst’s older streets starve solar panels, and the rack and pinion misalignment from heaving posts compounds it. We size panels honestly and mount them where they’ll actually see sun.
• Rust-through at hinge collars on original iron gates. Hurst’s housing stock dates to the late 1950s through the 1970s, and many original wrought iron gates have rusted thin at the hinge collar after decades of wet-dry cycles. We weld new collar sleeves or replace the hinge posts entirely when the metal’s too far gone.

Pricing for Gate Installation in Hurst, TX

We Also Serve Cities Near Hurst

Our Hurst customers often ask if we cover neighboring cities. We do. You’ll find our crews in Bedford, North Richland Hills, Colleyville, and Euless working on the same soil, the same mid-century housing stock, and the same gate problems we see in Hurst.

FAQs - Gate Installation in Hurst

How much extra footing depth does a Hurst clay soil gate post need to resist future heave?

In Hurst’s expansive Blackland Prairie clay, a gate post should be set 36-42 inches deep with a bell-bottom flare at the base, compared to the standard 24-inch straight footing used in sandier neighboring soil. The wider base resists the upward force of swelling clay and keeps the post from heaving out of plumb. Call (432) 237-4128 for a footing assessment before you order a new gate.

Why does my 60-year-old gate post look fine but lean badly?

Because the concrete is still sound, but the clay underneath it isn’t stable. Hurst’s shrink-swell soil has been moving that post a fraction of an inch per season for decades. It heaves, it settles, it heaves again, and the post tilts a little more each cycle. The post itself often remains intact. The fix is excavation, re-plumbing, and a bell-bottom footing that stops the movement. Replacing the gate without fixing the footing means the new gate leans too.

Can I add a solar gate opener to a double swing gate on a shaded Hurst acreage?

Yes, but only if the panel gets enough sun. Heavy shade from mature oaks and pecans is common on Hurst acreage entrances, and an undersized or poorly placed panel will leave your gate dead on the wrong day. We size the panel and battery bank to your actual shade conditions, and we’ll tell you honestly if solar will work or if a different power solution makes more sense. Call (432) 237-4128 and we’ll assess your entrance in person.

What happens when a new gate is installed on a post with existing clay heave damage?

The new gate inherits the old problem. If the post is already 3-5 inches off vertical, hanging a new gate on it means binding, torn hinge collars, and a gate that won’t close true within a year or two. A proper Hurst installation means addressing the post first: excavate, re-plumb, pour a bell-bottom footing, then hang the gate on a foundation that will stay put. That’s the difference between a five-year gate and a forty-year gate.

How do you keep a long driveway gate from sagging in Hurst’s shrinking brick-ranch soil?

The gate itself needs a heavier frame and better reinforcement at the stress points, and the posts need deeper, bell-bottom footings that resist the seasonal shrink-swell. For long double driveways, we also add a mid-span support or continuous post reinforcement where the span demands it. The goal is a gate that tracks true through Hurst’s worst weather cycles - the hot dry spells, the sudden heavy rains, and everything the clay does after that.

Call Ironworks Gate Co. for Gate Installation in Hurst

If you’re in Hurst and your gate post is leaning, your double gate is binding, or you’re ready to put in a gate that will outlast the next five Texas summers, call us. We’ll send a technician who knows Hurst’s clay, Hurst’s housing stock, and Hurst’s gate problems. You’ll get a written price before any work starts. The job is done right, and it’s guaranteed in writing.

Call (432) 237-4128 for a free estimate.

Written by Victor Salinas, Owner at Ironworks Gate Co., serving Hurst and surrounding Tarrant County communities for over 42 years.