Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across North Richland Hills
Gate parts and welding work in North Richland Hills usually falls into two camps: the post that has heaved out of plumb on clay soil, or the hinge that finally gave way after thirty Texas summers. Most jobs we handle are completed in a single visit, with the price settled before we turn a bolt. We work across 76180 and 76182, from the established ranch-style neighborhoods to the newer master-planned subdivisions. If your gate is sagging, dragging, or won’t latch, call (432) 237-4128 and a live person answers, day or night.
Why Ironworks Gate Co. Is North Richland Hills’s Preferred Gate Parts & Welding Company
We have spent over 42 years learning what North Texas soil does to a gate post. North Richland Hills sits on shrink-swell clay that moves with every rain and every drought cycle, and that movement shows up first at the hinge post. Homeowners here call us because we already know the failure pattern before we pull into the driveway. The post is out of plumb, the gate is dragging on the latch side, and the hinges are carrying load they were never designed to carry. That is the standard call in 76180.
Our technicians are background-checked and uniformed, and they work in your yard the way they would work in their own mother’s. Every completed job carries the 90-Day Done Right Promise in writing. If it is not right, we come back and make it right. No paperwork, no arguing. That guarantee is applied to every hinge, every weld, every post we set in North Richland Hills.
Victor Salinas has built this company on a simple idea: the 400th job gets the same care as the first. That is why most of our North Richland Hills work comes from referrals, not ads. A neighbor tells a neighbor, because the gate closes square and stays square.
Our Gate Parts & Welding Services in North Richland Hills
Hinge Replacement
In North Richland Hills, hinge failure is rarely about the hinge itself. It is about the post moving behind it. A gate that has dragged for years on heaved clay will oval out the hinge barrels and bend the leafs until no amount of tightening will bring it back. We replace hinges with heavier-gauge steel and, more importantly, we correct the post alignment so the new hardware is not fighting the same battle. Our Gate Parts & Welding team stocks common heavy-duty strap hinges and weld-on barrel hinges, so most hinge replacements happen in one visit.
Post Replacement
This is the recurring service call in North Richland Hills, and the one homeowners here understand better than almost anywhere else in the metro. The Fort Worth Prairie clay under 76180 swells in the wet months and shrinks in the dry ones, and a post set in a shallow footing will heave, tilt, and go out of plumb within three to five years. We pull the old post, dig a deeper footing, set the new post in concrete, and re-hang the gate so it closes like the day it was installed. In the newer subdivisions of 76182, where ornamental iron driveway gates are common, we see builder-grade posts set too shallow by the developer. Same fix, same result.
Rail Repair
Wood privacy gates in North Richland Hills’s older neighborhoods take the full brunt of North Texas heat. The top and bottom rails on a 30-year-old cedar gate crack, split, or pull free from the stile, and the gate begins to rack. We repair or replace rails, re-square the frame, and add diagonal bracing where the original builder skipped it. The goal is to get a gate that feels solid when you open it, not one that flexes like a screen door.
Custom Welding
Ornamental iron gates in 76182’s planned communities often need work that simply cannot be bolted back together. A snapped weld on a scroll, a cracked joint at the latch stile, a broken picket after a hard freeze. Our welders carry mobile rigs and repair on site, matching the existing finish as closely as the metal allows. When an HOA requires a specific finial or a matching infill panel, we fabricate it. Custom welding is the difference between a gate that gets patched and a gate that gets fixed.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in North Richland Hills
When a North Richland Hills gate has an operator issue tied to parts or welding, the brand on the motor matters. Our technicians are trained and equipped on nine automation brands, including LiftMaster, Elite, and Mighty Mule, so the diagnosis is correct the first time. We keep common replacement parts on the trucks serving North Richland Hills, which means less waiting on a distributor and more single-visit repairs. If your gate needs a new hinge, a weld repair, and an operator adjustment all at once, we handle the whole job in one trip.
Common Gate Parts & Welding Problems We See in North Richland Hills Homes
- Clay soil heaving posts out of plumb. The shrink-swell clay under the Fort Worth Prairie moves with every rain and drought cycle. Posts set in shallow footings tilt within a few years, and the gate drags or binds. The fix is a deeper footing and proper re-plumbing, not a shim.
- Builder-grade operators failing in North Texas heat. In 76182’s newer subdivisions, developers often install entry-level operators. A full North Texas summer pushes past 100°F, and when the gate binds on a shifting post, the control board burns out. We replace the board and fix the post movement that caused the failure.
- Aging wood gates sagging at the hinge post. The 76180 ZIP code is full of ranch-style homes built between the mid-1970s and early 1990s, and the original cedar privacy gates are now 30 to 40 years old. Decades of heat-induced warping and freeze-thaw cycles have left them sagging and dragging. Hinge replacement and rail repair buy years of service at a fraction of full replacement cost.
- Pool barrier gates that won’t self-close or latch. North Richland Hills has a high concentration of backyard pools, and Texas law requires self-closing, self-latching barrier gates. A sagging gate that drifts open is a code-compliance problem, not just a nuisance. We repair the hinge geometry so the gate closes and latches on its own every time.
Pricing for Gate Parts & Welding in North Richland Hills, TX
Hinge replacement in North Richland Hills typically runs $180 to $320, depending on the hinge style and whether the post needs straightening at the same time. Post replacement runs $450 to $800 for a standard wood privacy gate post, higher for ornamental iron posts in 76182 that require welding and finish matching. Rail repair lands between $150 and $350. Custom welding is quoted by the job, but most single-joint weld repairs run $120 to $250. The price is quoted and agreed before any work starts, so there are no surprises on the bill. Call (432) 237-4128 for a free estimate.
In North Richland Hills specifically, we see two forces pushing against each other. The older 76180 stock is full of wood gates nearing end-of-life, which means more posts and hinges and rails than full replacements. The newer 76182 stock has iron gates and automation, which means more welding and operator work. Both require the same thing: a tech who understands clay soil and thirty years of local building practices. We carry that knowledge on every truck.
One call we remember from a 76182 subdivision: a builder-grade LiftMaster swing operator on an ornamental iron driveway gate that the developer had installed manual and never trenched conduit for. Our crew trenched new conduit from the house, set a new hinge post with a deeper footing to resist the clay heave, and added a safety photocell and keypad entry. The HOA-governed gate came up to code without a full replacement. That is the kind of job we do regularly across North Richland Hills.
If you are in 76180 with a sagging pool gate or in 76182 with an operator that gave up after the last hard freeze, the path forward is the same. Call us, get a square quote, and watch the gate close like it should. The work is backed in writing with the 90-Day Done Right Promise.
We Also Serve Cities Near North Richland Hills
Beyond North Richland Hills, our crews cover Hurst, Colleyville, Bedford, and Keller. The soil and the housing stock change block by block out here, and we know the failure patterns in each of these cities. When you call, you get a live person who knows the area, not a call center reading a script.
Serving North Richland Hills, TX - Our Local Coverage Area
We’re based in the North Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in North Richland Hills
North Richland Hills sits on shrink-swell clay from the Fort Worth Prairie, and that clay expands when wet and contracts when dry. A post set in a shallow footing gets pushed and pulled with every weather cycle until it tilts. The permanent fix is a deeper footing and proper re-plumbing, which is exactly what we do on every post replacement. Call (432) 237-4128 and we will come look at your post and give you a written quote.
Yes. Many newer homes in North Richland Hills were built with manual gates and no conduit for automation. We trench new conduit from the house to the gate, pull power and control wiring, and mount the operator on properly aligned posts. The clay soil here shifts enough that the trench and the post footings both need to be done correctly or the cables will pinch and the gate will bind. We handle the entire run, from the panel to the keypad, so you do not need a second contractor.
Yes. Texas law requires pool barrier gates to be self-closing and self-latching, and a sagging gate that drifts open is a code-compliance and liability issue. The usual cause in North Richland Hills is a hinge post that has heaved on clay soil and hinges that have ovaled out after years of dragging. We fix the post, replace the hinges, and get the gate closing and latching on its own. Call (432) 237-4128 for an exact quote; estimates are free.
Often, yes. Many master-planned communities in 76182 have architectural standards that govern gate materials, finishes, and even the type of hardware visible from the street. We are familiar with working under HOA requirements in North Richland Hills’s newer subdivisions, and we match finishes and materials to the governing documents. We can also fabricate custom parts to match existing ornamental iron when a stock replacement would not pass review.
When water gets into a hairline crack or a porous weld, a hard freeze expands it. North Richland Hills saw this sharply during the February 2021 winter storm, and we still see the aftermath: snapped welds on scrollwork, cracked joints at latch stiles, and broken pickets. The damage is repairable in place. Our welders grind out the crack, re-weld the joint, and match the finish. Do not put it off; a cracked weld carries the whole gate’s load, and it fails at the worst time.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving North Richland Hills and the surrounding communities.